Today's Message Index:
----------------------
1. 05:19 AM - Re: RV-10 (Conti, Rick)
2. 08:23 AM - Re: RV-10 (John Farra)
3. 08:50 AM - Re: RV-10 (Gary B. Jacobs)
4. 08:55 AM - Re: RV-10 (Gary B. Jacobs)
5. 08:56 AM - Re: RV-10 (Gary B. Jacobs)
6. 09:11 AM - Re: RV-10 (Conti, Rick)
7. 10:27 AM - Re: RV-10 (Conti, Rick)
8. 11:17 AM - Re: RV-10 (John Farra)
Message 1
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV10-List message posted by: "Conti, Rick" <rick.conti@boeing.com>
All,
I just bought a band saw after staring at the spar caps and wondering how I was
going to cut them. Of all the "nice to have tools", band saw is number 1. I
bought a 9" Delta table model, $99.00. Can't imagine building a 10 without it.
Thank You
Rick Conti
The Boeing Company
office: 703 - 872 - 4602
cell: 703 - 472 - 8592
If you're looking for a cute saying....fuhgeddaboudit
-----Original Message-----
From: Gary B. Jacobs [mailto:gblayne@mchsi.com]
Subject: RV10-List: RV-10
--> RV10-List message posted by: "Gary B. Jacobs" <gblayne@mchsi.com>
Have finished my vertical stab, rudder & horizontal stab. Starting on the elevator.
So far this kit is awesome. The experience Van's Aircraft gained from
doing all those other kits really shows on this one. I have a band saw and pneumatic
rivet squeezer and couldn't imagine doing this without it.
Gary & Marianne Jacobs
535 Woodbine Ct.
Mason City, IA 50401
gblayne@mchsi.com
(641) 420-8815
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV10-List message posted by: "John Farra" <jfarra@iapc.net>
Rick: Where did you get such a deal and where are you located. I'm hoping
to build one within the next few years [have a Grumman Tiger now] and would
like to see one coming together.
John Farra
4600 Gulf Freeway
Suite 600
Houston, Texas 77023-3537
713.928.8100 [voice]
713.928.6744 [facsimile]
832.689.6171 [cell]
N82EJ [1976 Grumman Tiger]
KSGR [Near Houston, Texas]
----- Original Message -----
From: "Conti, Rick" <rick.conti@boeing.com>
Subject: RE: RV10-List: RV-10
> --> RV10-List message posted by: "Conti, Rick" <rick.conti@boeing.com>
>
> All,
>
> I just bought a band saw after staring at the spar caps and wondering how
I was going to cut them. Of all the "nice to have tools", band saw is
number 1. I bought a 9" Delta table model, $99.00. Can't imagine building
a 10 without it.
>
> Thank You
> Rick Conti
> The Boeing Company
> office: 703 - 872 - 4602
> cell: 703 - 472 - 8592
> If you're looking for a cute saying....fuhgeddaboudit
>
>
> -----Original Message-----
> From: Gary B. Jacobs [mailto:gblayne@mchsi.com]
> To: rv10-list@matronics.com
> Subject: RV10-List: RV-10
>
>
> --> RV10-List message posted by: "Gary B. Jacobs" <gblayne@mchsi.com>
>
> Have finished my vertical stab, rudder & horizontal stab. Starting on the
elevator. So far this kit is awesome. The experience Van's Aircraft gained
from doing all those other kits really shows on this one. I have a band saw
and pneumatic rivet squeezer and couldn't imagine doing this without it.
>
> Gary & Marianne Jacobs
> 535 Woodbine Ct.
> Mason City, IA 50401
> gblayne@mchsi.com
> (641) 420-8815
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV10-List message posted by: "Gary B. Jacobs" <gblayne@mchsi.com>
I'm using Cleaveland Tool's rivet squeezer. What a help!! I play the
guitar and realized after the first two days of building that I either
needed to get an air squeezer or choose between the guitar and the airplane.
----- Original Message -----
From: "Dennis and Stephanie Smith" <famflier@centurytel.net>
Subject: Re: RV10-List: RV-10
> --> RV10-List message posted by: "Dennis and Stephanie Smith"
<famflier@centurytel.net>
>
> Gary
> I just got my empennage kit last week, so I am a few weeks behind you.
> Hopefully I will catch up someday.
> I was wondering which pneumatic squeezer you were using and on which
parts?
> Might be something I should get as well.
> Keep up the good work.
> Dennis
> RV-10 #97
>
>
> -------Original Message-------
>
> From: rv10-list@matronics.com
> Date: Sunday, November 02, 2003 4:06:48 PM
> To: rv10-list@matronics.com
> Subject: RV10-List: RV-10
>
> --> RV10-List message posted by: "Gary B. Jacobs" <gblayne@mchsi.com>
>
> Have finished my vertical stab, rudder & horizontal stab. Starting on the
> elevator. So far this kit is awesome. The experience Van's Aircraft gained
> from doing all those other kits really shows on this one. I have a band
saw
> and pneumatic rivet squeezer and couldn't imagine doing this without it.
>
> Gary & Marianne Jacobs
> 535 Woodbine Ct.
> Mason City, IA 50401
> gblayne@mchsi.com
> (641) 420-8815
>
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV10-List message posted by: "Gary B. Jacobs" <gblayne@mchsi.com>
I have a 3X rivet gun. I have air outlets all around the table with 90psi
and wanted to be able to run the rivet gun at about 40psi and adjust it
individually, so I hooked a quick release to a regulator, then to one of
Cleaveland Tools' lightweight pressure hoses, then to a volume
regulator/swivel, then to the gun. That way I can plug the gun in anywhere
without having to worry about whether I reset the pressure. The pressure
regulator seems to work well for setting the force of the gun and the volume
regulator on the swivel makes it easy for fine adjustments.
----- Original Message -----
From: "Dan Checkoway" <dan@rvproject.com>
Subject: Re: RV10-List: RV-10
> --> RV10-List message posted by: "Dan Checkoway" <dan@rvproject.com>
>
> > Here are a couple of questions I need answered.
> > What pressure are you running on your rivet guns? I have a 3X
>
> http://www.rvproject.com/rivets.html
>
> At the bottom of the page, there are a couple of charts I threw together
> with "ballpark" air pressures for various rivet sizes. Take it with a
grain
> of salt...my experience is that every setup is slightly different.
>
> )_( Dan
> RV-7 N714D
> http://www.rvproject.com
>
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV10-List message posted by: "Gary B. Jacobs" <gblayne@mchsi.com>
I got the same band saw. Found a $79.99 sale. Works great, doesn't it?
Have you been able to get the table exactly level?
----- Original Message -----
From: "Conti, Rick" <rick.conti@boeing.com>
Subject: RE: RV10-List: RV-10
> --> RV10-List message posted by: "Conti, Rick" <rick.conti@boeing.com>
>
> All,
>
> I just bought a band saw after staring at the spar caps and wondering how
I was going to cut them. Of all the "nice to have tools", band saw is
number 1. I bought a 9" Delta table model, $99.00. Can't imagine building
a 10 without it.
>
> Thank You
> Rick Conti
> The Boeing Company
> office: 703 - 872 - 4602
> cell: 703 - 472 - 8592
> If you're looking for a cute saying....fuhgeddaboudit
>
>
> -----Original Message-----
> From: Gary B. Jacobs [mailto:gblayne@mchsi.com]
> To: rv10-list@matronics.com
> Subject: RV10-List: RV-10
>
>
> --> RV10-List message posted by: "Gary B. Jacobs" <gblayne@mchsi.com>
>
> Have finished my vertical stab, rudder & horizontal stab. Starting on the
elevator. So far this kit is awesome. The experience Van's Aircraft gained
from doing all those other kits really shows on this one. I have a band saw
and pneumatic rivet squeezer and couldn't imagine doing this without it.
>
> Gary & Marianne Jacobs
> 535 Woodbine Ct.
> Mason City, IA 50401
> gblayne@mchsi.com
> (641) 420-8815
>
>
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV10-List message posted by: "Conti, Rick" <rick.conti@boeing.com>
I live in Arlington, VA. Bought the saw at Lowe's. Much like Home Depot, but
a cut above.
Thank You
Rick Conti
The Boeing Company
office: 703 - 872 - 4602
cell: 703 - 472 - 8592
If you're looking for a cute saying....fuhgeddaboudit
-----Original Message-----
From: John Farra [mailto:jfarra@iapc.net]
Subject: Re: RV10-List: RV-10
--> RV10-List message posted by: "John Farra" <jfarra@iapc.net>
Rick: Where did you get such a deal and where are you located. I'm hoping to
build one within the next few years [have a Grumman Tiger now] and would like
to see one coming together.
John Farra
4600 Gulf Freeway
Suite 600
Houston, Texas 77023-3537
713.928.8100 [voice]
713.928.6744 [facsimile]
832.689.6171 [cell]
N82EJ [1976 Grumman Tiger]
KSGR [Near Houston, Texas]
----- Original Message -----
From: "Conti, Rick" <rick.conti@boeing.com>
Subject: RE: RV10-List: RV-10
> --> RV10-List message posted by: "Conti, Rick" <rick.conti@boeing.com>
>
> All,
>
> I just bought a band saw after staring at the spar caps and wondering
> how
I was going to cut them. Of all the "nice to have tools", band saw is number 1.
I bought a 9" Delta table model, $99.00. Can't imagine building a 10 without
it.
>
> Thank You
> Rick Conti
> The Boeing Company
> office: 703 - 872 - 4602
> cell: 703 - 472 - 8592
> If you're looking for a cute saying....fuhgeddaboudit
>
>
> -----Original Message-----
> From: Gary B. Jacobs [mailto:gblayne@mchsi.com]
> To: rv10-list@matronics.com
> Subject: RV10-List: RV-10
>
>
> --> RV10-List message posted by: "Gary B. Jacobs" <gblayne@mchsi.com>
>
> Have finished my vertical stab, rudder & horizontal stab. Starting on
> the
elevator. So far this kit is awesome. The experience Van's Aircraft gained from
doing all those other kits really shows on this one. I have a band saw and
pneumatic rivet squeezer and couldn't imagine doing this without it.
>
> Gary & Marianne Jacobs
> 535 Woodbine Ct.
> Mason City, IA 50401
> gblayne@mchsi.com
> (641) 420-8815
>
>
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV10-List message posted by: "Conti, Rick" <rick.conti@boeing.com>
You got a great buy. I bought mine on a Sunday afternoon, probably would have
paid a $1000 if I had to.
I haven't been concerned (yet) about the table being perfectly level. All cuts
are deburred and that helps to "straighten" the edges.
Thank You
Rick Conti
The Boeing Company
office: 703 - 872 - 4602
cell: 703 - 472 - 8592
If you're looking for a cute saying....fuhgeddaboudit
-----Original Message-----
From: Gary B. Jacobs [mailto:gblayne@mchsi.com]
Subject: Re: RV10-List: RV-10
--> RV10-List message posted by: "Gary B. Jacobs" <gblayne@mchsi.com>
I got the same band saw. Found a $79.99 sale. Works great, doesn't it? Have you
been able to get the table exactly level?
----- Original Message -----
From: "Conti, Rick" <rick.conti@boeing.com>
Subject: RE: RV10-List: RV-10
> --> RV10-List message posted by: "Conti, Rick" <rick.conti@boeing.com>
>
> All,
>
> I just bought a band saw after staring at the spar caps and wondering
> how
I was going to cut them. Of all the "nice to have tools", band saw is number 1.
I bought a 9" Delta table model, $99.00. Can't imagine building a 10 without
it.
>
> Thank You
> Rick Conti
> The Boeing Company
> office: 703 - 872 - 4602
> cell: 703 - 472 - 8592
> If you're looking for a cute saying....fuhgeddaboudit
>
>
> -----Original Message-----
> From: Gary B. Jacobs [mailto:gblayne@mchsi.com]
> To: rv10-list@matronics.com
> Subject: RV10-List: RV-10
>
>
> --> RV10-List message posted by: "Gary B. Jacobs" <gblayne@mchsi.com>
>
> Have finished my vertical stab, rudder & horizontal stab. Starting on
> the
elevator. So far this kit is awesome. The experience Van's Aircraft gained from
doing all those other kits really shows on this one. I have a band saw and
pneumatic rivet squeezer and couldn't imagine doing this without it.
>
> Gary & Marianne Jacobs
> 535 Woodbine Ct.
> Mason City, IA 50401
> gblayne@mchsi.com
> (641) 420-8815
>
>
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV10-List message posted by: "John Farra" <jfarra@iapc.net>
Thanks, Rick. jf
----- Original Message -----
From: "Conti, Rick" <rick.conti@boeing.com>
Subject: RE: RV10-List: RV-10
> --> RV10-List message posted by: "Conti, Rick" <rick.conti@boeing.com>
>
> I live in Arlington, VA. Bought the saw at Lowe's. Much like Home Depot,
but a cut above.
>
> Thank You
> Rick Conti
> The Boeing Company
> office: 703 - 872 - 4602
> cell: 703 - 472 - 8592
> If you're looking for a cute saying....fuhgeddaboudit
>
>
> -----Original Message-----
> From: John Farra [mailto:jfarra@iapc.net]
> To: rv10-list@matronics.com
> Subject: Re: RV10-List: RV-10
>
>
> --> RV10-List message posted by: "John Farra" <jfarra@iapc.net>
>
> Rick: Where did you get such a deal and where are you located. I'm
hoping to build one within the next few years [have a Grumman Tiger now] and
would like to see one coming together.
>
> John Farra
> 4600 Gulf Freeway
> Suite 600
> Houston, Texas 77023-3537
> 713.928.8100 [voice]
> 713.928.6744 [facsimile]
> 832.689.6171 [cell]
>
> N82EJ [1976 Grumman Tiger]
> KSGR [Near Houston, Texas]
> ----- Original Message -----
> From: "Conti, Rick" <rick.conti@boeing.com>
> To: <rv10-list@matronics.com>
> Subject: RE: RV10-List: RV-10
>
>
> > --> RV10-List message posted by: "Conti, Rick" <rick.conti@boeing.com>
> >
> > All,
> >
> > I just bought a band saw after staring at the spar caps and wondering
> > how
> I was going to cut them. Of all the "nice to have tools", band saw is
number 1. I bought a 9" Delta table model, $99.00. Can't imagine building
a 10 without it.
> >
> > Thank You
> > Rick Conti
> > The Boeing Company
> > office: 703 - 872 - 4602
> > cell: 703 - 472 - 8592
> > If you're looking for a cute saying....fuhgeddaboudit
> >
> >
> > -----Original Message-----
> > From: Gary B. Jacobs [mailto:gblayne@mchsi.com]
> > To: rv10-list@matronics.com
> > Subject: RV10-List: RV-10
> >
> >
> > --> RV10-List message posted by: "Gary B. Jacobs" <gblayne@mchsi.com>
> >
> > Have finished my vertical stab, rudder & horizontal stab. Starting on
> > the
> elevator. So far this kit is awesome. The experience Van's Aircraft
gained from doing all those other kits really shows on this one. I have a
band saw and pneumatic rivet squeezer and couldn't imagine doing this
without it.
> >
> > Gary & Marianne Jacobs
> > 535 Woodbine Ct.
> > Mason City, IA 50401
> > gblayne@mchsi.com
> > (641) 420-8815
> >
> >
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|