Today's Message Index:
----------------------
1. 12:53 PM - Re: RV-10 fuselage kit (Randy DeBauw)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RV-10 fuselage kit |
--> RV10-List message posted by: "Randy DeBauw" <randy@abros.com>
Hello Mark and group. We saw the same problem 2 weekends ago. I made the
decision to joggle them my self using the plans a to were to make the
joggle. When we got done we inserted a 1/4" drill bit into the bolt hole
and it fit fine. I told Scott Risen about it last week and he said "we
supplied the drawing so you could make the joggle didn't we." Nope. The
way I saw it is they are going to send me some new joggled ones or provide
the plans for them. Randy
----- Original Message -----
From: "Mark Chamberlain" <10flyer@verizon.net>
Subject: RV10-List: RV-10 fuselage kit
> --> RV10-List message posted by: "Mark Chamberlain" <10flyer@verizon.net>
>
> For those of you already pounding through the first few sections of the
Fuse kit, I stumbled across another small omition in parts today. I was
collecting the parts for Sec 26 when i noticed that the seatbelt attach
parts ( fwd and aft seats ) on the plans have a joggle in them while the
parts i recieved are all flat. I talked to Vans today and they are looking
into it and agree that the attach part should be joggled to allow the belt
to be sandwhiched between the bracket and the structure. I thought about
bending them myself, however they suggested that the bolt hole might not
line up with the other bracket. This all but shoots down the first page or
two of Sec 26 until you get the right parts. Vans said they would know more
on Monday. I guess i'll start the firewall section and come back to this
later . Just a heads up!! Mark
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|