Today's Message Index:
----------------------
1. 03:34 AM - Re: Sun And fun (Mani Ravee)
2. 04:45 AM - Sun And fun : Contact Info (Tim Olson)
3. 05:24 AM - Re: Sun And fun : Contact Info (Condrey, Bob (US SSA))
4. 06:31 AM - Re: Sun And fun : Contact Info (Tim Olson)
5. 07:28 AM - Any NH or MA Builders? (Condrey, Bob (US SSA))
6. 07:38 AM - Re: Stall Warning Assembly (Rick)
7. 07:40 AM - Re: Stall Warning Assembly (Rick)
8. 07:44 AM - Local to Sun-N-Fun (Jesse Saint)
9. 07:46 AM - VOR/GS Antenna (Jesse Saint)
10. 07:56 AM - Re: VOR/GS Antenna (Stein Bruch)
11. 07:56 AM - Re: VOR/GS Antenna (Stein Bruch)
12. 11:15 AM - Re: Sun And fun : Contact Info (Larry)
13. 11:40 AM - Re: VOR/GS Antenna (David McNeill)
14. 12:24 PM - Re: Fuel Tank Attach Bracket Shims (owner-rv10-list-server@matronics.com)
15. 12:25 PM - Re: Batteries (Jim Combs)
16. 12:44 PM - Re: Fuel Tank Attach Bracket Shims (Randy DeBauw)
17. 12:54 PM - Re: Batteries (James Hein)
18. 01:23 PM - Re: Batteries (Joe Bienkowski)
19. 02:14 PM - Re: Sun And fun : Contact Info (RobHickman@aol.com)
20. 02:40 PM - Re: Sun And fun : Contact Info (Sean Stephens)
21. 06:05 PM - Re: VOR/GS Antenna (LessDragProd@aol.com)
22. 07:37 PM - seat harness measurments (David McNeill)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV10-List message posted by: "Mani Ravee" <maniravee@sbcglobal.net>
So I guess there are 3 people on this list who will be there. Cool. Maybe we
can fly in the _10 all three of us all day long! :)
Tim sounds like a good Idea. I will be there later part of Thursday, and
will make it straight to Van's place there. So if we want to exchange cell
#s, would be a good idea.
Mani
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Robert G. Wright
Subject: RE: RV10-List: Sun And fun
--> RV10-List message posted by: "Robert G. Wright"
<armywrights@adelphia.net>
I'll be there all day 15/16. I'd like to meet some of you. I don't know if
I'll have the tail kit on order by then, so I'd be willing to split the $50
with another potential builder on Friday.
Rob Wright
Practice kit complete
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Tim Olson
Subject: Re: RV10-List: Sun And fun
--> RV10-List message posted by: Tim Olson <Tim@MyRV10.com>
Mani, (and all)
PLEASE tell me that you made a typo and you really mean 4/14-4/27!
http://www.sun-n-fun.org
My dates would be 4/14 and 4/15 most likely.
For those who are planning to go....I can offer you this:
I could set up a password-only web page where you could email
me your cellphone number, along with the dates you plan
to be there. Then when when I reply to you, I'd send you
the password to the page. That way you could use that to
set up meeting times with other listmembers.
Another option would be just to set a standard time of
meeting if people want to gather....like say, 8am, 11am,
and 2pm there could be a 15 minute window where people
could gather near the RV-10 at Van's booth and then go
from there.
Or....We could all wear pink shorts, lime green shirts,
blue shoes, and cowboy hats. ;) <kidding of course!>
Tim #170
DO NOT ARCHIVE
Mani Ravee wrote:
> OK, just got word that I will be off. So have booked my flight tickets
> and stay to Tampa/ Lakeland. Will be there from the afternoon of 4/24 to
> the afternoon of 4/27. Who are all coming and how do we meet and make
> this a fun time. I really NEED a ride on the _10. I have not even SEEN
> it. Oh boy! Am I excited already or what?
>
>
>
> Mani Ravee, MD MC
>
> Pulmonary Medicine & Critical Care
>
> Maj. US Army Medical Corps
>
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Sun And fun : Contact Info |
--> RV10-List message posted by: Tim Olson <Tim@MyRV10.com>
Ok, last night I did some work on the page so the base of it is all
ready to go. What I have is a page that lists the following:
Name(plus kit#), Email, Home Locale, Contact number, which days.
Here's a sample page: http://www.myrv10.com/snf2
I hope the password thing isn't too cumbersome, but I really don't
think everyone wants their cell #'s blasted all over the net,
and their email addresses skimmed from the page for spamming, so
it's protected for your benefit. The only people who get the list,
are the people who are ON the list.
Just Email me (A PERSONAL EMAIL) with your info, and I'll put you
on the list and send you the password. The actual list will be
at the same link as above, but drop the "2" from the end.
I've included the Locale field because as I get this info, my plan is
to make a map of the US and canada (sorry to those who are out of
the US), and put a dot on the map where all the builders are. After
SNF is over, as soon as I can get to it, I'll put the map on the
website too so that builders can see where other builders are.
I do want to help protect your privacy though, so please understand
about the password thing. I don't get much spam, and I want to keep
it that way for all of us.
PS: Grab my email address from the top of this message, or from my
main page contact link at http://www.myrv10.com
---
Tim Olson -- RV-10 #170
DO NOT ARCHIVE
Mani Ravee wrote:
> --> RV10-List message posted by: "Mani Ravee" <maniravee@sbcglobal.net>
>
>
> So I guess there are 3 people on this list who will be there. Cool. Maybe we
> can fly in the _10 all three of us all day long! :)
> Tim sounds like a good Idea. I will be there later part of Thursday, and
> will make it straight to Van's place there. So if we want to exchange cell
> #s, would be a good idea.
> Mani
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Sun And fun : Contact Info |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Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Sun And fun : Contact Info |
--> RV10-List message posted by: Tim Olson <Tim@MyRV10.com>
Ok, so with only a couple of people replying so far, I've already
received good suggestions. I've added a column for home base
airport, and I'll add website links to your site as well.
And, for people like Bob, go ahead and send me your info if you
wish, and you can get the list. I'll just put your days
at the show as NONE.
Tim
Tim Olson -- RV-10 #170
Condrey, Bob (US SSA) wrote:
> Thanks for providing the service Tim! Although I'm not going to be able to make
it down to Florida, this will come in really handy for OSH...
>
> Bob #40105
>
> -----Original Message-----
> From: owner-rv10-list-server@matronics.com on behalf of Tim Olson
> Sent: Tue 03/29/2005 06:44 AM
> To: rv10-list@matronics.com
> Cc:
> Subject: RV10-List: Sun And fun : Contact Info
>
>
>
> --> RV10-List message posted by: Tim Olson <Tim@MyRV10.com>
>
> Ok, last night I did some work on the page so the base of it is all
> ready to go. What I have is a page that lists the following:
>
> Name(plus kit#), Email, Home Locale, Contact number, which days.
> Here's a sample page: http://www.myrv10.com/snf2
>
> I hope the password thing isn't too cumbersome, but I really don't
> think everyone wants their cell #'s blasted all over the net,
> and their email addresses skimmed from the page for spamming, so
> it's protected for your benefit. The only people who get the list,
> are the people who are ON the list.
>
> Just Email me (A PERSONAL EMAIL) with your info, and I'll put you
> on the list and send you the password. The actual list will be
> at the same link as above, but drop the "2" from the end.
>
> I've included the Locale field because as I get this info, my plan is
> to make a map of the US and canada (sorry to those who are out of
> the US), and put a dot on the map where all the builders are. After
> SNF is over, as soon as I can get to it, I'll put the map on the
> website too so that builders can see where other builders are.
>
> I do want to help protect your privacy though, so please understand
> about the password thing. I don't get much spam, and I want to keep
> it that way for all of us.
>
> PS: Grab my email address from the top of this message, or from my
> main page contact link at http://www.myrv10.com
>
> ---
> Tim Olson -- RV-10 #170
> DO NOT ARCHIVE
>
>
> Mani Ravee wrote:
> > --> RV10-List message posted by: "Mani Ravee" <maniravee@sbcglobal.net>
> >
> >
> > So I guess there are 3 people on this list who will be there. Cool.
Maybe we
> > can fly in the _10 all three of us all day long! :)
> > Tim sounds like a good Idea. I will be there later part of Thursday,
and
> > will make it straight to Van's place there. So if we want to exchange
cell
> > #s, would be a good idea.
> > Mani
>
>
>
>
>
>
>
>
>
>
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Any NH or MA Builders? |
--> RV10-List message posted by: "Condrey, Bob (US SSA)" <bob.condrey@baesystems.com>
Hey gang,
Looks like my travel plans have changed a bit and I'm going to be in Manchester,
NH and Burlington, MA area for the next couple of days. Any builders in the
area up for a visit?
Bob #40105
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Stall Warning Assembly |
--> RV10-List message posted by: Rick <ricksked@earthlink.net>
BEFORE BEFORE BEFORE,
A lot easier to do while it's out of the LE assembly
Rick S.
40185
Wings
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Stall Warning Assembly |
--> RV10-List message posted by: Rick <ricksked@earthlink.net>
Oops, I meant before mounting the leading edge to the wing, you can easily install
it while the leading edge is in the cradle and adjust it there without a problem,
to install t after the leading edge is installed on the wings is tough
but not impossible.
Rick S.
40185
Wings
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Local to Sun-N-Fun |
clamav-milter version 0.80j
on hestia
We are just about to start the finishing kit. If anybody is going to be at
Sun-N-Fun and would like to stop by and check out the -10. We are in
Dunnellon, FL (X35), which is a normal stop-off for planes in and out of
Sun-N-Fun because of the cheap gas and low traffic. We are the
northern-most hangar on the east taxi-way. Give me a call at my cell or
work number below if you want to stop by either before or after the show (or
during, I guess, as long as it isn't Tues, Wed or Sat).
Jesse Saint
I-TEC, Inc.
jesse@itecusa.org
www.itecusa.org
W: 352-465-4545
C: 352-427-0285
F: 815-377-3694
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
clamav-milter version 0.80j
on hestia
We have our VOR/GS antenna (rabbit ears), but don't know if we like the idea
of having that thing sticking off our tail. Who has plans for an internal
one and what do you recommend?
Thanks.
Jesse Saint
I-TEC, Inc.
jesse@itecusa.org
www.itecusa.org
W: 352-465-4545
C: 352-427-0285
F: 815-377-3694
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
d="scan'217,208"; a="980100624:sNHT33033884"
No reason to use the cat whiskers any more, especially when the internal
wingtip NAV's work just fine. There are a couple, but most have been using
the Bob Archer Sportcraft antenna with good results.
Just my 2 cents!
Cheers,
Stein.
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com]On Behalf Of Jesse Saint
Sent: Tuesday, March 29, 2005 9:45 AM
To: rv10-list@matronics.com
Subject: RV10-List: VOR/GS Antenna
We have our VOR/GS antenna (rabbit ears), but don't know if we like the
idea of having that thing sticking off our tail. Who has plans for an
internal one and what do you recommend?
Thanks.
Jesse Saint
I-TEC, Inc.
jesse@itecusa.org
www.itecusa.org
W: 352-465-4545
C: 352-427-0285
F: 815-377-3694
352-427-0285
F: 815-377-3694
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
d="scan'217,208"; a="980100624:sNHT33033884"
No reason to use the cat whiskers any more, especially when the internal
wingtip NAV's work just fine. There are a couple, but most have been using
the Bob Archer Sportcraft antenna with good results.
Just my 2 cents!
Cheers,
Stein.
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com]On Behalf Of Jesse Saint
Sent: Tuesday, March 29, 2005 9:45 AM
To: rv10-list@matronics.com
Subject: RV10-List: VOR/GS Antenna
We have our VOR/GS antenna (rabbit ears), but don't know if we like the
idea of having that thing sticking off our tail. Who has plans for an
internal one and what do you recommend?
Thanks.
Jesse Saint
I-TEC, Inc.
jesse@itecusa.org
www.itecusa.org
W: 352-465-4545
C: 352-427-0285
F: 815-377-3694
352-427-0285
F: 815-377-3694
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Sun And fun : Contact Info |
--> RV10-List message posted by: Larry <LarryRosen@comcast.net>
Tim,
You may now be the keeper of the RV10 whitepages. Secure, and with more
information.
Larry Rosen
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: VOR/GS Antenna |
I believe Bob Archer also sells direct from his website.
----- Original Message -----
From: Condrey, Bob (US SSA)
To: rv10-list@matronics.com
Sent: Tuesday, March 29, 2005 8:56 AM
Subject: RE: RV10-List: VOR/GS Antenna
Archer internal wingtip antenna seems to have good reviews (that's what I'm going with). Here's the link to the ACS page with description info. http://www.aircraftspruce.com/catalog/avpages/archer_antennas.php
I've heard a lot of mixed reviews on the wingtip comm antennas but folks really
seem to like the nav version.
Bob #40105
-----Original Message-----
From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com]On Behalf Of Jesse Saint
Sent: Tuesday, March 29, 2005 9:45 AM
To: rv10-list@matronics.com
Subject: RV10-List: VOR/GS Antenna
We have our VOR/GS antenna (rabbit ears), but don't know if we like the idea
of having that thing sticking off our tail. Who has plans for an internal one
and what do you recommend?
Thanks.
Jesse Saint
I-TEC, Inc.
jesse@itecusa.org
www.itecusa.org
W: 352-465-4545
C: 352-427-0285
F: 815-377-3694
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Fuel Tank Attach Bracket Shims |
--> RV10-List message posted by: "Napoli, Nikolaos (Contr)" <nikolaos.napoli@ngc.com>
Randy,
Did you mean that the strip is dimpled and the fuel tank attach bracket which its
sitting on is countersunk?
I believe all the screw hole are dimpled on the shim and countersunk on the fuel
tank attach bracket.
-----Original Message-----
[mailto:owner-rv10-list-server@matronics.com]On Behalf Of Randy DeBauw
Subject: RE: RV10-List: Fuel Tank Attach Bracket Shims
--> RV10-List message posted by: "Randy DeBauw" <Randy@abros.com>
It is confusing since you don't have the rest of the plans. The strip needs to
be either C/S or dimpled depending on the material thickness. You will be laying
a 5" wide or so filler strip over that parts and the filler strip has dimpled
#8 screws that hold it down. Randy
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com]On Behalf Of Napoli,
Nikolaos (Contr)
Subject: RV10-List: Fuel Tank Attach Bracket Shims
--> RV10-List message posted by: "Napoli, Nikolaos (Contr)" <nikolaos.napoli@ngc.com>
I am getting confused with the installation of the two shims on the fuel tank attach
bracket.
There are several screw holes on the shims, but the instructions mention dimpling
only two of them. What happens to the rest? Are they dimpled also? Is the
attach bracket countersunk to accept the dimples for the screw holes?
thanks in advance for your replies
Niko
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV10-List message posted by: "Jim Combs" <jimc@mail.infra-read.com>
You only get the amp hour rating of one battery (Whichever one is weakest). The
two batteries give you the increase voltage but not increase amp hour rating.
Sorry!
Jim C
---------- Original Message ----------------------------------
From: "Tim Dawson-Townsend" <Tdawson@avidyne.com>
Does anyone know the rules for battery capacity in series? We're going to have
a 24 volt system, and we're thinking about putting two 12v Odyssey batteries
in series to make a 24 volt battery. (Interestingly enough, Cirrus does this .
. .)
Do I get the storage equivalent in amp-hours of two batteries, or just one?
TDT
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Fuel Tank Attach Bracket Shims |
--> RV10-List message posted by: "Randy DeBauw" <Randy@abros.com>
I would have to look at the plans again but 3 weeks ago before I painted the wings
I looked over the wings and was able to figure out which holes had to be dimpled
or C/S. You can wait to install that shim until you test fit the wings.
Then when you lay the filler plate in the wings you will see what need to happen
to the holes. Randy
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com]On Behalf Of Napoli,
Nikolaos (Contr)
Subject: RE: RV10-List: Fuel Tank Attach Bracket Shims
--> RV10-List message posted by: "Napoli, Nikolaos (Contr)" <nikolaos.napoli@ngc.com>
Randy,
Did you mean that the strip is dimpled and the fuel tank attach bracket which its
sitting on is countersunk?
I believe all the screw hole are dimpled on the shim and countersunk on the fuel
tank attach bracket.
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com]On Behalf Of Randy DeBauw
Subject: RE: RV10-List: Fuel Tank Attach Bracket Shims
--> RV10-List message posted by: "Randy DeBauw" <Randy@abros.com>
It is confusing since you don't have the rest of the plans. The strip needs to
be either C/S or dimpled depending on the material thickness. You will be laying
a 5" wide or so filler strip over that parts and the filler strip has dimpled
#8 screws that hold it down. Randy
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com]On Behalf Of Napoli,
Nikolaos (Contr)
Subject: RV10-List: Fuel Tank Attach Bracket Shims
--> RV10-List message posted by: "Napoli, Nikolaos (Contr)" <nikolaos.napoli@ngc.com>
I am getting confused with the installation of the two shims on the fuel tank attach
bracket.
There are several screw holes on the shims, but the instructions mention dimpling
only two of them. What happens to the rest? Are they dimpled also? Is the
attach bracket countersunk to accept the dimples for the screw holes?
thanks in advance for your replies
Niko
Message 17
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
d="scan'208"; a="861925436:sNHT1605625748"
--> RV10-List message posted by: James Hein <n8vim@arrl.net>
In series, you will only get the capacity of one battery (assuming both
are the same rating).
-Jim
Tim Dawson-Townsend wrote:
>
>Does anyone know the rules for battery capacity in series? We're going to have
a 24 volt system, and we're thinking about putting two 12v Odyssey batteries
in series to make a 24 volt battery. (Interestingly enough, Cirrus does this
. . .)
>
>Do I get the storage equivalent in amp-hours of two batteries, or just one?
>
>TDT
>
>
>
>
Message 18
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV10-List message posted by: Joe Bienkowski <joeb47@verizon.net>
Dear Tim,
You get the same Ampere Hours as either single battery. If they are the
same size!
What you do get more of is TWICE the voltage, so that your total stored
energy is
TWO times as much as a single battery!
Joe
Tim Dawson-Townsend wrote:
>
>Does anyone know the rules for battery capacity in series? We're going to have
a 24 volt system, and we're thinking about putting two 12v Odyssey batteries
in series to make a 24 volt battery. (Interestingly enough, Cirrus does this
. . .)
>
>Do I get the storage equivalent in amp-hours of two batteries, or just one?
>
>TDT
>
>
>
>
Message 19
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Sun And fun : Contact Info |
Please feel free to stop by the booth at Sun-N-Fun D-014 or use it to leave
messages or ??
We are finally making progress on our RV-10 after moving and remodeling an
old house. Jeffrey, my 14 year old that is doing a lot of the work on the
RV-10 will also be at Sun-N-Fun.
Last Friday afternoon Jeffrey and I got a chance to fly the first prototype
RV-10 with Ken Scott. The RV-10 is even better than I expected, visibility
as awesome, stalls are very gentle, and the IO-540 was very smooth. I was
very surprised how quit it is inside. The vibration is remarkably lower than
my
RV-4.
And that Engine monitor and AOA looks and works great in it. :)
See you all at Sun-n-Fun....
Rob Hickman
Advanced Flight Systems (D-14)
N401RH RV-4. N402RH RV-10
P.S.
Also come see our new ...........
Message 20
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Sun And fun : Contact Info |
--> RV10-List message posted by: Sean Stephens <schmoboy@cox.net>
Nice teaser... :)
-Sean #40303
do not archive
RobHickman@aol.com wrote:
>
> P.S.
>
> Also come see our new ...........
>
>
>
Message 21
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: VOR/GS Antenna |
You can call Bob Archer direct at (310) 316-8796.
Or email him at _bobsantennas@earthlink.com_ (javascript:void)
Wingtip antenna's are $65 each plus shipping from Bob. I just ordered two
of these antenna's for a friends Cessna 210. Seems he got tired of my cheap
radio's receiving the NAV signal farther away than his factory certified
installation. :-)
Regards,
Jim Ayers
Less Drag Products, Inc.
In a message dated 03/29/2005 11:42:59 AM Pacific Standard Time,
dlm46007@cox.net writes:
I believe Bob Archer also sells direct from his website.
Message 22
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | seat harness measurments |
I am planning to use 4 point inertial reel seat harnesses in my 10. From someone
who already has the belts supplied by Van's I would like to know the following.
front seat lap belt lengths each side
shoulder harness total length (Van's has indicated that from the single bolt hard
point to the Y is 18")
rear seat lap belt lengths each side
rear seat shoulder harness total length and length to the Y
diagonal distance from top of rear seat to rear edge of the lid ( I may want to
create some additional hard points.)
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|