---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Thu 04/07/05: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:39 AM - Primers (Bill and Tami Britton) 2. 07:06 AM - Cogsdill (Napoli, Nikolaos (Contr)) 3. 07:10 AM - Re: Primers (Mani Ravee) 4. 07:38 AM - Re: MEK protection - I'm lost ;) (Rick) 5. 07:42 AM - Re: Primers (Rick) 6. 08:06 PM - [ Mani Ravee ] : New Email List Photo Share Available! (Email List Photo Shares) 7. 08:09 PM - [ David McNeill ] : New Email List Photo Share Available! (Email List Photo Shares) 8. 08:11 PM - air compressor (Dj Merrill) 9. 09:23 PM - Re: air compressor (Tim Olson) ________________________________ Message 1 _____________________________________ Time: 06:39:35 AM PST US From: "Bill and Tami Britton" Subject: RV10-List: Primers spamd1.ruraltel.net * -2.0 RCVD_FROM_NEXTECH_5 Message came from 204.96.144-152.x network 1.60 NO_DNS_FOR_FROM DNS: Envelope sender has no MX or A DNS records I have been using a Prekote/ Sherwin Williams 2-part epoxy primer system on my RV-10 thus far. I'm thinking of changing primers to one of the easier rattle can methods (I think SW and Napa both have self-etching rattle can primers). My question is if I change primers in the middle of the project, how will these new primers react to the original 2-part epoxy primer already applied to some parts (especially where the 2 will come into direct contact)??? For example, the HS spars are done with the 2-part epoxy primer. The ribs will be done with the new rattle can primer. Any compatibility problems here?? Anybody got any other ideas??? The 2-part system works but it just takes too much prep and cleanup time. I know that water based primers have been mentioned. Any thoughts/ideas there??? In your opinion, what is the best/easiest priming method for the most reasonable cost??? I don't want to start a priming war here, just getting some ideas. TIA, Bill Britton RV-10 Emp Priming HS ________________________________ Message 2 _____________________________________ Time: 07:06:02 AM PST US Subject: RV10-List: Cogsdill From: "Napoli, Nikolaos (Contr)" --> RV10-List message posted by: "Napoli, Nikolaos (Contr)" I just talked to Kathleen and Cogsdill and she said that they use a different blade for deburring aluminum. Its what they are calling a DAZ blade instead of a DAT blade (I think). You need to mention that you are deburring aluminum when placing your order. Niko ________________________________ Message 3 _____________________________________ Time: 07:10:20 AM PST US From: "Mani Ravee" Subject: RE: RV10-List: Primers I think I will be sticking with the Alumiprep/Alodine + AKZO for now. I am happy with the results. It is a whole day or two work to do it each time, but in the end the airplane will be happy. Rattle can stuff just don't sound right in an airplane. Except in some small areas. The whole idea of us building is to build it better than a Cessna. :-) Mani Ravee ________________________________ Message 4 _____________________________________ Time: 07:38:04 AM PST US From: Rick Subject: Re: RV10-List: MEK protection - I'm lost ;) --> RV10-List message posted by: Rick James, Nitrile gloves work but the MEK tends to make them wear out/weaken, I wear two sets, when the outside breaks put on another pair. I found latex don't last as long in MEK as the Nitrile. Rick ________________________________ Message 5 _____________________________________ Time: 07:42:58 AM PST US From: Rick Subject: Re: RV10-List: Primers DNA: do not archive Its-Bogus: do not forward to list --- MIME Errors --- A message with no text/plain section was received. The entire body of the message was removed. Please resend the email using plaintext formatting. NOTE! This error can also occur when the poster of the message has a specific type of computer virus. This virus WAS NOT forwarded on to the List. The poster should be informed of the potential problem with their system as soon as possible. --- MIME Errors --- ________________________________ Message 6 _____________________________________ Time: 08:06:43 PM PST US Subject: RV10-List: [ Mani Ravee ] : New Email List Photo Share Available! From: Email List Photo Shares --> RV10-List message posted by: Email List Photo Shares A new Email List Photo Share is available: Poster: Mani Ravee Lists: RV-List,RV10-List Subject: Touch up spray kit http://www.matronics.com/photoshare/maniravee@sbcglobal.net.04.07.2005/index.html o Main Photo Share Index http://www.matronics.com/photoshare o Submitting a Photo Share If you wish to submit a Photo Share of your own, please include the following information along with your email message and files: 1) Email List or Lists that they are related to: 2) Your Full Name: 3) Your Email Address: 4) One line Subject description: 5) Multi-line, multi-paragraph description of topic: 6) One-line Description of each photo or file: Email the information above and your files and photos to: pictures@matronics.com ________________________________ Message 7 _____________________________________ Time: 08:09:07 PM PST US Subject: RV10-List: [ David McNeill ] : New Email List Photo Share Available! From: Email List Photo Shares --> RV10-List message posted by: Email List Photo Shares A new Email List Photo Share is available: Poster: David McNeill Lists: RV-List,RV10-List Subject: O540 specs http://www.matronics.com/photoshare/dlm34077@cox.net.04.07.2005/index.html o Main Photo Share Index http://www.matronics.com/photoshare o Submitting a Photo Share If you wish to submit a Photo Share of your own, please include the following information along with your email message and files: 1) Email List or Lists that they are related to: 2) Your Full Name: 3) Your Email Address: 4) One line Subject description: 5) Multi-line, multi-paragraph description of topic: 6) One-line Description of each photo or file: Email the information above and your files and photos to: pictures@matronics.com ________________________________ Message 8 _____________________________________ Time: 08:11:27 PM PST US From: Dj Merrill Subject: RV10-List: air compressor --> RV10-List message posted by: Dj Merrill Hi all, I'm in the market for an air compressor to run my tools. I need to find something that is as quiet as possible, since my workshop is part of the house. Any suggestions? -Dj -- Dj Merrill deej@thayer.dartmouth.edu "TSA: Totally Screwing Aviation" ________________________________ Message 9 _____________________________________ Time: 09:23:50 PM PST US From: Tim Olson Subject: Re: RV10-List: air compressor --> RV10-List message posted by: Tim Olson I don't think you'll have an easy time finding a truly quiet one, but here's some advice. Whatever you do, don't go oilless if you want longevity and/or quietness. If you want as quiet as possible, buy a model with a cast iron head and cylinder. They probably will last longer than many too. When I started building, I shopped long and hard and I purchased a very nice one, for not any more than many cheaper ones run. It's the Campbell Hausfeld VT6271, which is a 26 gal. twin cylinder cast iron (240V only -- 15A) oil lube that puts out 10.3@90PSI (11.8@40PSI). I got it for only $349 directly from Campbell-Hausfeld. Shipping was reasonable too. This compressor is really just the motor/pump from their vertical 60gal. model placed on the 26gal. horizontal tank. It works great for me so far and is night-and-day quieter than a friends oil-free compressor. I chose this model for one big reason. You really want over 10CFM if possible for doing your painting, and running some of the tools like die grinders and even the drill to some extent. If you had the space, you're probably better off with the 60 gallon upright, but my smaller horizontal fits under my bench. Don't be worried about pulling in a 240V outlet...it's easy for anyone who can build a plane. Also, be careful while shopping. Many companies over-state their real horsepower rating. you really want to find out how many CFM @ 90psi it can do. Anything under about 5 or 7 is just too small. Anything over 14 or so would be more than most people would need for their project. You have to call them and ask for that price (it's cheaper than their website listing). Their number is 1-888-CHPOWER. Tim Olson #40170 Dj Merrill wrote: > --> RV10-List message posted by: Dj Merrill > > Hi all, > I'm in the market for an air compressor to run > my tools. I need to find something that is as > quiet as possible, since my workshop is part of the > house. > > Any suggestions? > > -Dj >