---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Mon 07/18/05: 22 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:09 AM - Re: Panel Cutting and Radio Stack Photos (Russell Daves) 2. 04:05 AM - Re: Steel Plate for back riveting (Rick) 3. 04:12 AM - Re: Tank Vent lines (Rick) 4. 04:15 AM - Re: Panel Cutting and Radio Stack Photos (Rick) 5. 04:46 AM - Re: Panel Cutting and Radio Stack Photos (Tim Olson) 6. 05:01 AM - Re: Steel Plate for back riveting (Mark Grieve) 7. 05:04 AM - Re: Panel Cutting and Radio Stack Photos (Tim Olson) 8. 05:10 AM - Cost effective NR in the RV-10 (John W. Cox) 9. 06:46 AM - P7170077.JPG;P7170078.JPG (brian bollaert) 10. 07:14 AM - Re: Tank Vent lines (Randy DeBauw) 11. 08:56 AM - My Lucky Day (Tim Olson) 12. 09:18 AM - Re: Steel Plate for back riveting (Jim Combs) 13. 10:09 AM - Re: My Lucky Day (Brian Denk) 14. 10:12 AM - Re: P7170077.JPG;P7170078.JPG (Brian Denk) 15. 10:20 AM - Ice Cream Social, Dates and Map (Tim Olson) 16. 10:23 AM - Re: My Lucky Day (Darton Steve) 17. 10:46 AM - Re: My Lucky Day (Tim Olson) 18. 01:02 PM - Re: Steel Plate for back riveting (Lloyd, Daniel R.) 19. 03:29 PM - Re: P7170077.JPG;P7170078.JPG (Brian Sponcil) 20. 04:59 PM - Re: P7170077.JPG;P7170078.JPG (brian bollaert) 21. 05:29 PM - Re: Tank Vent lines (McGANN, Ron) 22. 11:15 PM - Re: Steel Plate for back riveting (AndrewTR30@aol.com) ________________________________ Message 1 _____________________________________ Time: 02:09:30 AM PST US From: "Russell Daves" Subject: Re: RV10-List: Panel Cutting and Radio Stack Photos --> RV10-List message posted by: "Russell Daves" Great looking panel Tim. Mine will also be on display at SteinAir but not as high dollar as yours. I went the Grand Rapids three display panel route. See you at OSH. Russ Daves ----- Original Message ----- From: "Tim Olson" Subject: RV10-List: Panel Cutting and Radio Stack Photos > --> RV10-List message posted by: Tim Olson > > > I'm guessing this will be slightly interesting to some of you. > > I heard late last week that the waterjet cutting machine had broke, > that was going to cut my panel for OSH.....so we had the guy > ship the panel back in a hurry. I decided to cut it myself, (my > buddy Steve, actually), using his mill. We sucessfully cut the > panel Saturday, and then I mounted the radio stack today. > It came out fantastic. I have to drill some switches and breakers, > mostly in that bottom panel strip, but other than that, most of > the drilling is done. I'm going to paint it up and then we'll > be wiring during the week this week. On track to show it to > y'all at OSH! > > Here's the link: > http://www.myrv10.com/N104CD/panel/20050717/ > > Enjoy! > > -- > > Tim Olson -- RV-10 #40170 > Current project: Fuselage > > DO NOT ARCHIVE > > > ________________________________ Message 2 _____________________________________ Time: 04:05:45 AM PST US From: Rick Subject: Re: RV10-List: Steel Plate for back riveting DNA: do not archive Its-Bogus: do not forward to list - No Plain-Text Section --- MIME Errors - No Plain-Text Section Found --- A message with no text/plain MIME section was received. The entire body of the message was removed. Please resend the email using Plain Text formatting. HOTMAIL is notorious for only including an HTML section in their client's default configuration. If you're using HOTMAIL, please see your email application's settings and switch to a default mail option that uses "Plain Text". --- MIME Errors No Plain-Text Section Found --- ________________________________ Message 3 _____________________________________ Time: 04:12:02 AM PST US From: Rick Subject: Re: RV10-List: Tank Vent lines --> RV10-List message posted by: Rick Ron, They turn down right after they exit the tank and penetrate the bottom wing gap seal right at the wing root between the fuselage side and the last rib. Rick S. 40185 Wings ________________________________ Message 4 _____________________________________ Time: 04:15:51 AM PST US From: Rick Subject: Re: RV10-List: Panel Cutting and Radio Stack Photos --> RV10-List message posted by: Rick Tim, Those displays have a pretty low profile, looks like a piece of cake to get them wired up. I assume they provide a harness vs. you having to build it yourself? Rick S. 40185 ________________________________ Message 5 _____________________________________ Time: 04:46:07 AM PST US From: Tim Olson Subject: Re: RV10-List: Panel Cutting and Radio Stack Photos --> RV10-List message posted by: Tim Olson Um, yeah....right. ;) Kinda sorta. As it turns out, we're kind of rushing to get it done, and Chelton is a bit behind on thier harnesses. So, they still owe us harnesses, and I'm still expecting them, but I'm not going to have them for the show. So, our plan is to wire the stack, and make our own harnesses for the time being. It might be some wasted work if we end up using their harnesses, but it may also be that we can call them up and tell them we want to skip the harnesses and see if we can work out a credit. To date, I'm missing the Airinc digital to RS232 converter also, so although the panel will be wired, it might not be 100% complete. I have the WSI weather module too. We're just going to do as much as we can reasonably get done before the show without killing ourselves. Luckily I'm maybe 6-8-10 months from flying, so there's plenty of time for a full finish later. This is a good warning to all, actually.....I know the lead times on many many products is pretty long. Almost NONE of your stuff will likely order and ship in a week or two. So, especially with the OSH sales piling up, my suggestion is to try to get your stuff ordered a few MONTHS in advance of when you need it. If you don't give it a 3 month lead time at least, you might be cutting it short. If you're not getting any EFIS stuff though, and going all Garmin and Steam, you can cut that time down. I can't complain too much...I was really rushing to get this done for the show...and, I actually really enjoy that sort of wiring. I'd trade ANYONE a pile of wiring hours for a pile of fiberglass work. ;) Tim Olson -- RV-10 #40170 Current project: Fuselage DO NOT ARCHIVE Rick wrote: > --> RV10-List message posted by: Rick > > Tim, > > Those displays have a pretty low profile, looks like a piece of cake to get them wired up. I assume they provide a harness vs. you having to build it yourself? > > Rick S. > 40185 > ________________________________ Message 6 _____________________________________ Time: 05:01:05 AM PST US From: Mark Grieve Subject: Re: RV10-List: Steel Plate for back riveting --> RV10-List message posted by: Mark Grieve John, I can't believe that I didn't think of this myself. What a perfect solution! Do not archive Mark John Jessen wrote: > Got a contractor's table saw? Makes a great back rivet steel plate. > > ** > ________________________________ Message 7 _____________________________________ Time: 05:04:32 AM PST US From: Tim Olson Subject: Re: RV10-List: Panel Cutting and Radio Stack Photos --> RV10-List message posted by: Tim Olson I forgot to mention one more thing.... The harnesses are expensive and a pain for Chelton to provide. There are new "G2" processors (I think that's right) in the new screens, and those cost more. They told me about the time I was ordering that within a week or two they were going to discontinue providing the harnesses with the systems because they just couldn't keep that added cost included with the new processors in them too. So, it is very likely that anyone ordering today will either be wiring their own Chelton harness, or buying it separately. The connectors are kind of special too....26 pin and 62 pin D-sub with HD .030 pins. Just wanted to prepare anyone going that route in the future. Tim Tim Olson -- RV-10 #40170 Current project: Fuselage DO NOT ARCHIVE Tim Olson wrote: > --> RV10-List message posted by: Tim Olson > > Um, yeah....right. ;) Kinda sorta. As it turns out, we're kind of > rushing to get it done, and Chelton is a bit behind on thier harnesses. > So, they still owe us harnesses, and I'm still expecting them, but > I'm not going to have them for the show. So, our plan is to wire > the stack, and make our own harnesses for the time being. It might > be some wasted work if we end up using their harnesses, but it may > also be that we can call them up and tell them we want to skip > the harnesses and see if we can work out a credit. To date, I'm > missing the Airinc digital to RS232 converter also, so although > the panel will be wired, it might not be 100% complete. I have > the WSI weather module too. We're just going to do as much as we > can reasonably get done before the show without killing ourselves. > Luckily I'm maybe 6-8-10 months from flying, so there's plenty of > time for a full finish later. > > This is a good warning to all, actually.....I know the lead times > on many many products is pretty long. Almost NONE of your stuff will > likely order and ship in a week or two. So, especially with the > OSH sales piling up, my suggestion is to try to get your stuff > ordered a few MONTHS in advance of when you need it. If you don't > give it a 3 month lead time at least, you might be cutting it > short. If you're not getting any EFIS stuff though, and going > all Garmin and Steam, you can cut that time down. > > I can't complain too much...I was really rushing to get this done > for the show...and, I actually really enjoy that sort of wiring. > I'd trade ANYONE a pile of wiring hours for a pile of fiberglass > work. ;) > > Tim Olson -- RV-10 #40170 > Current project: Fuselage > > DO NOT ARCHIVE > > > Rick wrote: > >> --> RV10-List message posted by: Rick >> >> Tim, >> >> Those displays have a pretty low profile, looks like a piece of cake >> to get them wired up. I assume they provide a harness vs. you having >> to build it yourself? >> >> Rick S. >> 40185 >> > > > > > > > > > > > ________________________________ Message 8 _____________________________________ Time: 05:10:19 AM PST US Subject: RV10-List: Cost effective NR in the RV-10 From: "John W. Cox" Here is a low cost NR solution for outfitting the RV-10 (four passenger). If you order the Bose Quiet Comfort 2 headsets from Bose Mailorder by 7/31 you get 10% additional savings off retail. http://www.bose.com/controller?eventVIEW_PRODUCT_PAGE_EVENT&productqc2 _headphones_index&pageName/index_3.jsp Sport Aviation just advertised 12 equal monthly payments with ZERO interest for those 12 months. These units are only 7 oz each (versus 12 oz for the aviation units). They have the similar capability of the aviation version, except no individual volume control on each headset. http://www.uflymike.com/ With the UFLYMIKE boom mike adapter you have a cost effective solution for a set of four for far less than the price of two aviation units. This guy is an ATP who found a better mouse trap. BOSE is seeing red cause scores of Commercial Air Carrier pilots are opting for the light weight and QC2 cost savings. I have no affiliation with this product or Bose. Just bought mine Saturday.... See you at OSH '2005. John - KUAO ________________________________ Message 9 _____________________________________ Time: 06:46:12 AM PST US From: "brian bollaert" Subject: RV10-List: P7170077.JPG;P7170078.JPG While working on our -10 at auburn, washington, the airport manager came up to me and said there is a rv-10 that just tied down ! Shure enough! it is the proud owners of Ed Mcginty and his wife from Boise Idaho placarded june 3rd -05 Brian Bollaert #40200 P7170077.JPG;P7170078.JPG ________________________________ Message 10 ____________________________________ Time: 07:14:14 AM PST US Subject: RE: RV10-List: Tank Vent lines From: "Randy DeBauw" --> RV10-List message posted by: "Randy DeBauw" Go to http://www.myrv10.com/N610RV/index.html and all your questions will be answered. Randy -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of McGANN, Ron Subject: RV10-List: Tank Vent lines --> RV10-List message posted by: "McGANN, Ron" --> G'day all, Since I haven't got the fuse plans yet - simple (silly) question for the day . . . Where do the fuel tank vent lines connect/exit to? Ron #187 Finishing wings ________________________________ Message 11 ____________________________________ Time: 08:56:03 AM PST US From: Tim Olson Subject: RV10-List: My Lucky Day --> RV10-List message posted by: Tim Olson I had a pleasant surprise today....George Costigan, a new RV-10 bulder, actually put me down as his finders fee guy from Van's. I'm very thankful that he thinks I've helped him out in some way. It's a very nice surprise indeed. This does trigger me to mention to any lurking future builders though... When you order your Kit from Van's, you can referr a name who either helped you come to the purchase of the kit, or helps you in some manner with something....in my case, it's an RV-4 builder locally (Rick) who was instrumental by "letting" ;) me help rivet his wings, so that I knew I could actually DO this kind of kit. With his motivation, I overcame the fear of the purchase. Just remember, when you buy your first kit, you have the opportuntiy to pass on a thanks in the form of a finders fee to someone. I belive you should pick someone who you really think provided some motivation, or will provide you some help down the road. it's a big project, and ideally you'll have a local builder who can help...and they'd be the perfect candidate for such a gift. I'm ABSOLUTELY NOT fishing for more of these myself, but I would like to make sure people know about that policy so that people can take advantage of the gift and not just forget about it and let it go unclaimed. For the record, I actually don't know exactly what the finders fee is. I can't remember if it's cash, or a credit for stuff from Van's, and I don't know how much it is. I did ask my buddy Rick at the time, but I just don't know anymore. Thanks George, and good luck with your kit! Tim -- Tim Olson -- RV-10 #40170 Current project: Fuselage ________________________________ Message 12 ____________________________________ Time: 09:18:17 AM PST US From: "Jim Combs" Subject: Re: RV10-List: Steel Plate for back riveting --> RV10-List message posted by: "Jim Combs" I have a table saw with a cat iron top. I back the saw plade down and back rivet using the table saw. It has extensions which helps to hold the plarger pieces. I cover the edges with a old bath towel to prevent scratches on the edges of the table saw. Works for me. Look in the phone book for a machine shop. They will have steel plates or can cut them for you. Later, Jim ---------- Original Message ---------------------------------- From: "jdalton77" Greetings, I want to build-in a large (at least 36" x 16") steel plate in my benchtop for back riveting. Most of the tool vendors sell wimpy little plates that are just too small. I've seen a number of complaints on this list about that. Any ideas on where I could pick up something like that? If it's wood or aluminum, I know where to go - but steel is something I don't know much about. Would a metal scrap yard have something like this? What have you guys done? Oshkosh Friday - Sunday. Jeff -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of JOHN STARN Subject: Re: RV10-List: bandsaw Make sure you get one that is designed for cutting metal OR one that you can get a metal (aluminum) blade. Bought a Ryoble (spelling ??) 9" but have to order blades from on-line source. Sears didn't have metal blades for their our bandsaw (Victorville Store) either. Bought two blades & they work great. KABONG 8*) Do Not Archive ----- Original Message ----- From: Bill and Tami Britton Subject: RV10-List: bandsaw I've decided to go and buy a bandsaw tomorrow. For you RV-10 guys, will a 9 or 10 inch bandsaw suffice or are there many times you wish you had a 12 inch. I'll probably buy from sears or home depot. Any specific specs I need to look for??? Bill Britton RV-10 #40137 Ready to start Elevators ________________________________ Message 13 ____________________________________ Time: 10:09:12 AM PST US From: "Brian Denk" Subject: RE: RV10-List: My Lucky Day --> RV10-List message posted by: "Brian Denk" >> >Just remember, when you buy your first kit, you have the opportuntiy >to pass on a thanks in the form of a finders fee to someone. >I belive you should pick someone who you really think provided >some motivation, or will provide you some help down the road. >it's a big project, and ideally you'll have a local builder who >can help...and they'd be the perfect candidate for such a gift. >I'm ABSOLUTELY NOT fishing for more of these myself, but I >would like to make sure people know about that policy so that >people can take advantage of the gift and not just forget about >it and let it go unclaimed. > >For the record, I actually don't know exactly what the finders >fee is. I can't remember if it's cash, or a credit for stuff >from Van's, and I don't know how much it is. I did ask my >buddy Rick at the time, but I just don't know anymore. > >Thanks George, and good luck with your kit! > >Tim > >-- > >Tim Olson -- RV-10 #40170 This IS a nice offering from Van's and helps foster good-will between the customer base and the corporation. I have six of them under my belt. You'll get a check from Van for $100. Brian Denk RV8 N94BD RV10 '51 do not archive ________________________________ Message 14 ____________________________________ Time: 10:12:16 AM PST US From: "Brian Denk" Subject: RE: RV10-List: P7170077.JPG;P7170078.JPG --> RV10-List message posted by: "Brian Denk" > >While working on our -10 at auburn, washington, the airport manager came up >to me and said there is a rv-10 that just tied down ! Shure enough! it is >the proud owners of Ed Mcginty and his wife from Boise Idaho placarded june >3rd -05 > > >Brian Bollaert >#40200 > SWEEEET! The similarity in N number AND paint scheme to my RV8 is downright scary. Could be a sign that I simply MUST get busy on my -10 again. Brian Denk RV8 N94BD, in teal and gold RV10 '51 waiting on QB wings. Still. ________________________________ Message 15 ____________________________________ Time: 10:20:57 AM PST US From: Tim Olson Subject: RV10-List: Ice Cream Social, Dates and Map I updated the site with a map that Mike sent me, and added the Ice Cream Social dates and times. http://www.myrv10.com/osh or osh2 if you aren't on the list. Map is also attached. Tim -- Tim Olson -- RV-10 #40170 Current project: Fuselage DO NOT ARCHIVE ________________________________ Message 16 ____________________________________ Time: 10:23:24 AM PST US s=s1024; d=yahoo.com; b=EBwwwvdJXoJXD60CJ9aoA2JLERMyhfniKwQwDQNId8O2LQdU+zwM89dqgjC0T6W6k/LXMyLNtWN0MqePnaXQJlY0Xr/TyoZMMQmgsfpGXCMhUu4ukAldyVWxDn/s+5O+ioERpoF+tuMGnaGvNpPhMFrSX4xfdvWrhKYpblk3O+8= ; From: Darton Steve Subject: Re: RV10-List: My Lucky Day --> RV10-List message posted by: Darton Steve My inspiring RV-6 buddy got $100 from Van when I listed him on the form. Steve 40212 --- Tim Olson wrote: > --> RV10-List message posted by: Tim Olson > > > I had a pleasant surprise today....George Costigan, > a new RV-10 bulder, > actually put me down as his finders fee guy from > Van's. I'm very > thankful that he thinks I've helped him out in some > way. It's > a very nice surprise indeed. > > This does trigger me to mention to any lurking > future builders though... > > When you order your Kit from Van's, you can referr a > name who > either helped you come to the purchase of the kit, > or helps > you in some manner with something....in my case, > it's an RV-4 > builder locally (Rick) who was instrumental by > "letting" ;) me > help rivet his wings, so that I knew I could > actually DO this > kind of kit. With his motivation, I overcame the > fear of > the purchase. > > Just remember, when you buy your first kit, you have > the opportuntiy > to pass on a thanks in the form of a finders fee to > someone. > I belive you should pick someone who you really > think provided > some motivation, or will provide you some help down > the road. > it's a big project, and ideally you'll have a local > builder who > can help...and they'd be the perfect candidate for > such a gift. > I'm ABSOLUTELY NOT fishing for more of these myself, > but I > would like to make sure people know about that > policy so that > people can take advantage of the gift and not just > forget about > it and let it go unclaimed. > > For the record, I actually don't know exactly what > the finders > fee is. I can't remember if it's cash, or a credit > for stuff > from Van's, and I don't know how much it is. I did > ask my > buddy Rick at the time, but I just don't know > anymore. > > Thanks George, and good luck with your kit! > > Tim > > -- > > Tim Olson -- RV-10 #40170 > Current project: Fuselage > > > > > > > browse > Subscriptions page, > FAQ, > > > > > > > > > > ________________________________ Message 17 ____________________________________ Time: 10:46:06 AM PST US From: Tim Olson Subject: Re: RV10-List: My Lucky Day --> RV10-List message posted by: Tim Olson Wow, it really is "Christmas in July"! ;) 6 for Brian...man, keep that up and you could tell Van's to just keep it and send you a fuselage kit. ;) Tim Olson -- RV-10 #40170 Current project: Fuselage DO NOT ARCHIVE Brian Denk wrote: > --> RV10-List message posted by: "Brian Denk" > >>> >> Just remember, when you buy your first kit, you have the opportuntiy >> to pass on a thanks in the form of a finders fee to someone. >> I belive you should pick someone who you really think provided >> some motivation, or will provide you some help down the road. >> it's a big project, and ideally you'll have a local builder who >> can help...and they'd be the perfect candidate for such a gift. >> I'm ABSOLUTELY NOT fishing for more of these myself, but I >> would like to make sure people know about that policy so that >> people can take advantage of the gift and not just forget about >> it and let it go unclaimed. >> >> For the record, I actually don't know exactly what the finders >> fee is. I can't remember if it's cash, or a credit for stuff >> from Van's, and I don't know how much it is. I did ask my >> buddy Rick at the time, but I just don't know anymore. >> >> Thanks George, and good luck with your kit! >> >> Tim >> >> -- >> >> Tim Olson -- RV-10 #40170 > > > > This IS a nice offering from Van's and helps foster good-will between > the customer base and the corporation. I have six of them under my > belt. You'll get a check from Van for $100. > > Brian Denk > RV8 N94BD > RV10 '51 > > do not archive > ________________________________ Message 18 ____________________________________ Time: 01:02:35 PM PST US Subject: RE: RV10-List: Steel Plate for back riveting From: "Lloyd, Daniel R." I went to the local welding/ steel shop, they can order or cut anything to size for you. Just polish it real well, and route out the hole in your workbench top. Also put fluorescent lines all the way across both directions marking where your plate ends!!! sounds like it should be obvious, but if you have someone helping they might not realize when you are getting close to the edge, nor will they be aware of what happens when there is no back plate! Dan _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of jdalton77 Subject: RV10-List: Steel Plate for back riveting Greetings, I want to build-in a large (at least 36" x 16") steel plate in my benchtop for back riveting. Most of the tool vendors sell wimpy little plates that are just too small. I've seen a number of complaints on this list about that. Any ideas on where I could pick up something like that? If it's wood or aluminum, I know where to go - but steel is something I don't know much about. Would a metal scrap yard have something like this? What have you guys done? Oshkosh Friday - Sunday. Jeff -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of JOHN STARN Sent: Saturday, July 16, 2005 12:31 AM To: rv10-list@matronics.com Subject: Re: RV10-List: bandsaw =09 =09 Make sure you get one that is designed for cutting metal OR one that you can get a metal (aluminum) blade. Bought a Ryoble (spelling ??) 9" but have to order blades from on-line source. Sears didn't have metal blades for their our bandsaw (Victorville Store) either. Bought two blades & they work great. KABONG 8*) Do Not Archive ----- Original Message ----- From: Bill and Tami Britton To: RV10-list@matronics.com Sent: Friday, July 15, 2005 8:35 PM Subject: RV10-List: bandsaw I've decided to go and buy a bandsaw tomorrow. For you RV-10 guys, will a 9 or 10 inch bandsaw suffice or are there many times you wish you had a 12 inch. I'll probably buy from sears or home depot. Any specific specs I need to look for??? Bill Britton RV-10 #40137 Ready to start Elevators ________________________________ Message 19 ____________________________________ Time: 03:29:25 PM PST US From: "Brian Sponcil" Subject: Re: RV10-List: P7170077.JPG;P7170078.JPG Yeah, he stopped over in Iowa City but sadly I never actually met him (just drooled on the glass). Are they coming to OSH? If so, the airport hotel owner is hosting a pre-OSH pool party on Saturday (http://www.alexisparkinn.com/fly-in_pool_party.htm). Anyone flying by is welcome to stop in. I certainly wouldn't mind another drool opportunity. -Brian Iowa City, IA ----- Original Message ----- From: brian bollaert To: rv10-list@matronics.com Sent: Monday, July 18, 2005 8:43 AM Subject: RV10-List: P7170077.JPG;P7170078.JPG While working on our -10 at auburn, washington, the airport manager came up to me and said there is a rv-10 that just tied down ! Shure enough! it is the proud owners of Ed Mcginty and his wife from Boise Idaho placarded june 3rd -05 Brian Bollaert #40200 P7170077.JPG;P7170078.JPG ________________________________ Message 20 ____________________________________ Time: 04:59:54 PM PST US From: "brian bollaert" Subject: Re: RV10-List: P7170077.JPG;P7170078.JPG No i don't think so they did not mention it , and they did say they are very busy with there 2 businesses . Brian Bollaert #40200 ----- Original Message ----- From: Brian Sponcil To: rv10-list@matronics.com Sent: Monday, July 18, 2005 3:28 PM Subject: Re: RV10-List: P7170077.JPG;P7170078.JPG Yeah, he stopped over in Iowa City but sadly I never actually met him (just drooled on the glass). Are they coming to OSH? If so, the airport hotel owner is hosting a pre-OSH pool party on Saturday (http://www.alexisparkinn.com/fly-in_pool_party.htm). Anyone flying by is welcome to stop in. I certainly wouldn't mind another drool opportunity. -Brian Iowa City, IA ----- Original Message ----- From: brian bollaert To: rv10-list@matronics.com Sent: Monday, July 18, 2005 8:43 AM Subject: RV10-List: P7170077.JPG;P7170078.JPG While working on our -10 at auburn, washington, the airport manager came up to me and said there is a rv-10 that just tied down ! Shure enough! it is the proud owners of Ed Mcginty and his wife from Boise Idaho placarded june 3rd -05 Brian Bollaert #40200 P7170077.JPG;P7170078.JPG ________________________________ Message 21 ____________________________________ Time: 05:29:03 PM PST US From: "McGANN, Ron" Subject: RE: RV10-List: Tank Vent lines --> RV10-List message posted by: "McGANN, Ron" Thanks Rick. Seems you are always there with an answer for me - much appreciated. Ron 40187 finishing wings Do not archive -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com]On Behalf Of Rick Subject: Re: RV10-List: Tank Vent lines --> RV10-List message posted by: Rick Ron, They turn down right after they exit the tank and penetrate the bottom wing gap seal right at the wing root between the fuselage side and the last rib. Rick S. 40185 Wings ________________________________ Message 22 ____________________________________ Time: 11:15:24 PM PST US From: AndrewTR30@aol.com Subject: Re: RV10-List: Steel Plate for back riveting All the back-riveting I have done has required the work to sit down flush on the back-riveting plate. If you have clecos inserted in every second, third or even fourth hole they will not let the skin sit down flush on such a large plate. I have used the one that Avery sells and have been happy with it so far. Andrew Rayhill QB wings 40078 Phoenix