Today's Message Index:
----------------------
1. 05:52 AM - Extra parts????? (Bill and Tami Britton)
2. 06:12 AM - Re: Extra parts????? (Lloyd, Daniel R.)
3. 07:22 AM - Re: Extra parts????? (Noel & Yoshie Simmons)
4. 07:34 AM - Re: Extra parts????? (Bill and Tami Britton)
5. 07:46 AM - Re: Extra parts????? (Noel & Yoshie Simmons)
6. 08:17 AM - Re: Extra parts????? (Lloyd, Daniel R.)
7. 12:08 PM - Re: Extra parts????? (Bill and Tami Britton)
8. 12:13 PM - Re: Extra parts????? (Condrey, Bob (US SSA))
9. 12:43 PM - Re: Extra parts????? (JOHN STARN)
10. 01:39 PM - Re: Extra parts????? (Greg Young)
11. 02:04 PM - RV-10 Hand Carved Model For Sale (Tim Olson)
12. 02:08 PM - Re: Extra parts????? (Greg Young [mailto)
13. 04:15 PM - Re: RV-10 Hand Carved Model For Sale (Lloyd, Daniel R.)
14. 04:36 PM - Re: Cutting Spinner to Go Over the Prop (Randy DeBauw)
15. 04:52 PM - Re: Extra parts????? (Randy DeBauw)
16. 06:47 PM - Elevator Hinge Pin (John Kirkland)
17. 07:03 PM - Re: Elevator Hinge Pin (Carl Froehlich)
18. 07:38 PM - Re: Extra parts????? (Bill and Tami Britton)
19. 10:45 PM - Re: Elevator Hinge Pin (Deems Davis)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
spamd4.ruraltel.net
* -4.0 RCVD_FROM_NEXTECH_4 Message came from 63.163.37-39.x network
* 0.0 UNPARSEABLE_RELAY Informational: message has unparseable relay
* lines
* 0.1 HTML_50_60 BODY: Message is 50% to 60% HTML
* 0.0 HTML_MESSAGE BODY: HTML included in message
* -0.8 BAYES_00 BODY: Bayesian spam probability is 0 to 1%
* 0.1 AWL AWL: From: address is in the auto white-list
| Subject: | Extra parts????? |
I am working on my elevators and while looking for some parts last night I came
across a part labeled VS-1016. It also has "#9" written on it with marker.
That part was probably done by the previous builder. Anyway, I've looked completely
through the builders manual and cannot even find mention of this part.
I see parts up to # VS-1015 but not 1016. Does anybody know if this is possibly
just an extra part or did the previous builder forget something???
Bill Britton
RV-10 #40137
Elevators in Progress
PS. I can take some pictures if anybody needs them.
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Extra parts????? |
Take a quick pic, visual always helps
_____
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bill and Tami
Britton
Subject: RV10-List: Extra parts?????
I am working on my elevators and while looking for some parts last night
I came across a part labeled VS-1016. It also has "#9" written on it
with marker. That part was probably done by the previous builder.
Anyway, I've looked completely through the builders manual and cannot
even find mention of this part. I see parts up to # VS-1015 but not
1016. Does anybody know if this is possibly just an extra part or did
the previous builder forget something???
Bill Britton
RV-10 #40137
Elevators in Progress
PS. I can take some pictures if anybody needs them.
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Extra parts????? |
It is the front attach point for the Vertical fin. Look in the section for
tail assembly. It is not exactly extra you may want to keep it around a
while longer
Noel
_____
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bill and Tami
Britton
Subject: RV10-List: Extra parts?????
I am working on my elevators and while looking for some parts last night I
came across a part labeled VS-1016. It also has "#9" written on it with
marker. That part was probably done by the previous builder. Anyway, I've
looked completely through the builders manual and cannot even find mention
of this part. I see parts up to # VS-1015 but not 1016. Does anybody know
if this is possibly just an extra part or did the previous builder forget
something???
Bill Britton
RV-10 #40137
Elevators in Progress
PS. I can take some pictures if anybody needs them.
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
spamd3.ruraltel.net
* -4.0 RCVD_FROM_NEXTECH_4 Message came from 63.163.37-39.x network
* 0.0 UNPARSEABLE_RELAY Informational: message has unparseable relay
* lines
* 0.0 HTML_MESSAGE BODY: HTML included in message
* -0.8 BAYES_00 BODY: Bayesian spam probability is 0 to 1%
* 0.2 AWL AWL: From: address is in the auto white-list
| Subject: | Re: Extra parts????? |
Here's a picture. Noel, where exactly did you find the part in the builders manual.
I've looked completely through it and I guess I obviously overlooked it.
Bill
----- Original Message -----
From: Noel & Yoshie Simmons
To: rv10-list@matronics.com
Sent: Monday, August 08, 2005 9:22 AM
Subject: RE: RV10-List: Extra parts?????
It is the front attach point for the Vertical fin. Look in the section for tail
assembly. It is not exactly extra you may want to keep it around a while
longer
Noel
From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bill and Tami Britton
Sent: Monday, August 08, 2005 6:52 AM
To: RV10-list@matronics.com
Subject: RV10-List: Extra parts?????
I am working on my elevators and while looking for some parts last night I came
across a part labeled VS-1016. It also has "#9" written on it with marker.
That part was probably done by the previous builder. Anyway, I've looked completely
through the builders manual and cannot even find mention of this part.
I see parts up to # VS-1015 but not 1016. Does anybody know if this is possibly
just an extra part or did the previous builder forget something???
Bill Britton
RV-10 #40137
Elevators in Progress
PS. I can take some pictures if anybody needs them.
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Extra parts????? |
11-5
_____
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bill and Tami
Britton
Subject: Re: RV10-List: Extra parts?????
Here's a picture. Noel, where exactly did you find the part in the builders
manual. I've looked completely through it and I guess I obviously
overlooked it.
Bill
----- Original Message -----
From: Noel <mailto:noel@blueskyaviation.net> & Yoshie Simmons
Subject: RE: RV10-List: Extra parts?????
It is the front attach point for the Vertical fin. Look in the section for
tail assembly. It is not exactly extra you may want to keep it around a
while longer
Noel
_____
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bill and Tami
Britton
Subject: RV10-List: Extra parts?????
I am working on my elevators and while looking for some parts last night I
came across a part labeled VS-1016. It also has "#9" written on it with
marker. That part was probably done by the previous builder. Anyway, I've
looked completely through the builders manual and cannot even find mention
of this part. I see parts up to # VS-1015 but not 1016. Does anybody know
if this is possibly just an extra part or did the previous builder forget
something???
Bill Britton
RV-10 #40137
Elevators in Progress
PS. I can take some pictures if anybody needs them.
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Extra parts????? |
It is the attach point for the VS, look in the manual on VS attach to
the HS. It is in chapter 11 page 4, left hand side of the page in the
middle blown up section
_____
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bill and Tami
Britton
Subject: Re: RV10-List: Extra parts?????
Here's a picture. Noel, where exactly did you find the part in the
builders manual. I've looked completely through it and I guess I
obviously overlooked it.
Bill
----- Original Message -----
From: Noel & Yoshie Simmons <mailto:noel@blueskyaviation.net>
To: rv10-list@matronics.com
Sent: Monday, August 08, 2005 9:22 AM
Subject: RE: RV10-List: Extra parts?????
It is the front attach point for the Vertical fin. Look in the
section for tail assembly. It is not exactly extra you may want to keep
it around a while longer
Noel
=09
_____
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bill and Tami
Britton
Sent: Monday, August 08, 2005 6:52 AM
To: RV10-list@matronics.com
Subject: RV10-List: Extra parts?????
I am working on my elevators and while looking for some parts
last night I came across a part labeled VS-1016. It also has "#9"
written on it with marker. That part was probably done by the previous
builder. Anyway, I've looked completely through the builders manual and
cannot even find mention of this part. I see parts up to # VS-1015 but
not 1016. Does anybody know if this is possibly just an extra part or
did the previous builder forget something???
Bill Britton
RV-10 #40137
Elevators in Progress
PS. I can take some pictures if anybody needs them.
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
spamd1.ruraltel.net
* -4.0 RCVD_FROM_NEXTECH_4 Message came from 63.163.37-39.x network
* 0.0 UNPARSEABLE_RELAY Informational: message has unparseable relay
* lines
* 0.0 HTML_MESSAGE BODY: HTML included in message
* -1.6 BAYES_00 BODY: Bayesian spam probability is 0 to 1%
* 0.6 AWL AWL: From: address is in the auto white-list
| Subject: | Re: Extra parts????? |
Thank you very much. I guess I just overlooked it.
Bill
----- Original Message -----
From: Lloyd, Daniel R.
To: rv10-list@matronics.com
Sent: Monday, August 08, 2005 10:16 AM
Subject: RE: RV10-List: Extra parts?????
It is the attach point for the VS, look in the manual on VS attach to the HS.
It is in chapter 11 page 4, left hand side of the page in the middle blown up
section
From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bill and Tami Britton
Sent: Monday, August 08, 2005 10:34 AM
To: rv10-list@matronics.com
Subject: Re: RV10-List: Extra parts?????
Here's a picture. Noel, where exactly did you find the part in the builders
manual. I've looked completely through it and I guess I obviously overlooked
it.
Bill
----- Original Message -----
From: Noel & Yoshie Simmons
To: rv10-list@matronics.com
Sent: Monday, August 08, 2005 9:22 AM
Subject: RE: RV10-List: Extra parts?????
It is the front attach point for the Vertical fin. Look in the section for
tail assembly. It is not exactly extra you may want to keep it around a while
longer
Noel
From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bill and Tami Britton
Sent: Monday, August 08, 2005 6:52 AM
To: RV10-list@matronics.com
Subject: RV10-List: Extra parts?????
I am working on my elevators and while looking for some parts last night I
came across a part labeled VS-1016. It also has "#9" written on it with marker.
That part was probably done by the previous builder. Anyway, I've looked
completely through the builders manual and cannot even find mention of this part.
I see parts up to # VS-1015 but not 1016. Does anybody know if this is possibly
just an extra part or did the previous builder forget something???
Bill Britton
RV-10 #40137
Elevators in Progress
PS. I can take some pictures if anybody needs them.
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Extra parts????? |
You actually will have a few parts that get set aside until later kits.
Obvious ones are the rear baggage wall but there's others that I can't
recall right now.
Bob #40105
_____
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bill and Tami
Britton
Subject: Re: RV10-List: Extra parts?????
Thank you very much. I guess I just overlooked it.
Bill
----- Original Message -----
From: Lloyd, Daniel R. <mailto:LloydDR@wernerco.com>
To: rv10-list@matronics.com
Sent: Monday, August 08, 2005 10:16 AM
Subject: RE: RV10-List: Extra parts?????
It is the attach point for the VS, look in the manual on VS
attach to the HS. It is in chapter 11 page 4, left hand side of the page
in the middle blown up section
=09
_____
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bill and Tami
Britton
Sent: Monday, August 08, 2005 10:34 AM
To: rv10-list@matronics.com
Subject: Re: RV10-List: Extra parts?????
Here's a picture. Noel, where exactly did you find the part in
the builders manual. I've looked completely through it and I guess I
obviously overlooked it.
Bill
----- Original Message -----
From: Noel & Yoshie Simmons
<mailto:noel@blueskyaviation.net>
To: rv10-list@matronics.com
Sent: Monday, August 08, 2005 9:22 AM
Subject: RE: RV10-List: Extra parts?????
It is the front attach point for the Vertical fin. Look
in the section for tail assembly. It is not exactly extra you may want
to keep it around a while longer
Noel
=09
_____
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bill and Tami
Britton
Sent: Monday, August 08, 2005 6:52 AM
To: RV10-list@matronics.com
Subject: RV10-List: Extra parts?????
I am working on my elevators and while looking for some
parts last night I came across a part labeled VS-1016. It also has "#9"
written on it with marker. That part was probably done by the previous
builder. Anyway, I've looked completely through the builders manual and
cannot even find mention of this part. I see parts up to # VS-1015 but
not 1016. Does anybody know if this is possibly just an extra part or
did the previous builder forget something???
Bill Britton
RV-10 #40137
Elevators in Progress
PS. I can take some pictures if anybody needs them.
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Extra parts????? |
Just a short comment. About two years ago the VS came off an RV in flight, the
"builder" had forgot/not used/didn't install the front attachment plate(s). This
is from memory so don't hold me to it exactly. BUT double check this and have
a second set of experienced eyes look everything over. KABONG HRII (where
you wind up with "extra" parts).
This post has been trimmed & Do Not Archive (ed)
: Extra parts?????
From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bill and Tami Britton
Sent: Monday, August 08, 2005 6:52 AM
To: RV10-list@matronics.com
Subject: RV10-List: Extra parts?????
I am working on my elevators and while looking for some parts last night
I came across a part labeled VS-1016. Does anybody know if this is possibly
just an extra part or did the previous builder forget something???
Bill Britton
RV-10 #40137
Elevators in Progress
PS. I can take some pictures if anybody needs them.
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Extra parts????? |
Sounds like you're referring to the Rocket lost here in Houston. I heard it was
one of the 1/8" reinforcing angles that was missing plus the VS rear spar wasn't
bolted except at the very bottom. Either way your comment is on target - get
another set of eyes and double check the plans. May be even more important
on the -10 since you don't have to scour the plans and make a bunch of parts and
you certainly shouldn't have anything left over.
Greg Young
________________________________
From: owner-rv10-list-server@matronics.com on behalf of JOHN STARN
Subject: Re: RV10-List: Extra parts?????
Just a short comment. About two years ago the VS came off an RV in flight, the
"builder" had forgot/not used/didn't install the front attachment plate(s). This
is from memory so don't hold me to it exactly. BUT double check this and have
a second set of experienced eyes look everything over. KABONG HRII (where
you wind up with "extra" parts).
This post has been trimmed & Do Not Archive (ed)
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | RV-10 Hand Carved Model For Sale |
--> RV10-List message posted by: Tim Olson <Tim@MyRV10.com>
Hi all,
I'm planning to sell or trade back in my RV-10 mahogany model (all
hand painted, by the way), and have the guy do another one
with my paint scheme. If there's someone who might be
interested in it, let me know. I wouldn't let it go dirt
cheap, but I would for a good amount less than
what a new one would cost.
Here's a photo.
http://www.myrv10.com/N104CD/misc/RV200507010122.html
Tim
--
Tim Olson -- RV-10 #40170
Current project: Fuselage
DO NOT ARCHIVE
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Extra parts????? |
YOu will always have a pile of important looking stuff left over...
_____
Of Greg Young
Subject: RE: RV10-List: Extra parts?????
Sounds like you're referring to the Rocket lost here in Houston. I heard
it was one of the 1/8" reinforcing angles that was missing plus the VS
rear spar wasn't bolted except at the very bottom. Either way your
comment is on target - get another set of eyes and double check the
plans. May be even more important on the -10 since you don't have to
scour the plans and make a bunch of parts and you certainly shouldn't
have anything left over.
Greg Young
_____
From: owner-rv10-list-server@matronics.com on behalf of JOHN STARN
Subject: Re: RV10-List: Extra parts?????
Just a short comment. About two years ago the VS came off an RV in
flight, the "builder" had forgot/not used/didn't install the front
attachment plate(s). This is from memory so don't hold me to it exactly.
BUT double check this and have a second set of experienced eyes look
everything over. KABONG HRII (where you wind up with "extra" parts).
This post has been trimmed & Do Not Archive (ed)
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | RV-10 Hand Carved Model For Sale |
--> RV10-List message posted by: "Lloyd, Daniel R." <LloydDR@wernerco.com>
Tim I will take it, how much do you want?
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Tim Olson
Subject: RV10-List: RV-10 Hand Carved Model For Sale
--> RV10-List message posted by: Tim Olson <Tim@MyRV10.com>
Hi all,
I'm planning to sell or trade back in my RV-10 mahogany model (all
hand painted, by the way), and have the guy do another one
with my paint scheme. If there's someone who might be
interested in it, let me know. I wouldn't let it go dirt
cheap, but I would for a good amount less than
what a new one would cost.
Here's a photo.
http://www.myrv10.com/N104CD/misc/RV200507010122.html
Tim
--
Tim Olson -- RV-10 #40170
Current project: Fuselage
DO NOT ARCHIVE
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Cutting Spinner to Go Over the Prop |
I used 2 2x2's clamped to the prop. You can also make a porp paddle.
Think of a paddle with a blade sized hole in the middle. That is what
the porp builders. Also you can add some air pressure to the inside of
the hub where the oil pressure goes to work it when it is on the engine.
Randy
________________________________
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of DejaVu
Subject: RV10-List: Cutting Spinner to Go Over the Prop
The instructions said to notch out the spinner to fit around the prop
blades, and make sure that you have the clearance around the blades for
all pitch angles. How do you move the prop blades?
Anh
#141
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Extra parts????? |
Trust me, you will need it but not right now. Keep in your parts and
one day it will come up. Randy
________________________________
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bill and Tami
Britton
Subject: Re: RV10-List: Extra parts?????
Here's a picture. Noel, where exactly did you find the part in the
builders manual. I've looked completely through it and I guess I
obviously overlooked it.
Bill
----- Original Message -----
From: Noel & Yoshie Simmons <mailto:noel@blueskyaviation.net>
To: rv10-list@matronics.com
Sent: Monday, August 08, 2005 9:22 AM
Subject: RE: RV10-List: Extra parts?????
It is the front attach point for the Vertical fin. Look in the
section for tail assembly. It is not exactly extra you may want to keep
it around a while longer
Noel
=09
________________________________
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bill and Tami
Britton
Sent: Monday, August 08, 2005 6:52 AM
To: RV10-list@matronics.com
Subject: RV10-List: Extra parts?????
I am working on my elevators and while looking for some parts
last night I came across a part labeled VS-1016. It also has "#9"
written on it with marker. That part was probably done by the previous
builder. Anyway, I've looked completely through the builders manual and
cannot even find mention of this part. I see parts up to # VS-1015 but
not 1016. Does anybody know if this is possibly just an extra part or
did the previous builder forget something???
Bill Britton
RV-10 #40137
Elevators in Progress
PS. I can take some pictures if anybody needs them.
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Elevator Hinge Pin |
--> RV10-List message posted by: "John Kirkland" <jskirkland@webpipe.net>
Page 9-19, Step #2: Bend the hinge pin....
Any danger of the pin cracking/fatiguing at those bends? They look awfully
tight in the figure. Do we have a favorite way of bending it so it doesn't
turn out ugly?
John Kirkland
#40333
Message 17
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Elevator Hinge Pin |
--> RV10-List message posted by: "Carl Froehlich" <carl.froehlich@cox.net>
Heat with a propane torch until red, then bend.
Carl Froehlich
RV-8A (200 hrs)
Dogwood Airpark (VA-42)
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com]On Behalf Of John Kirkland
Subject: RV10-List: Elevator Hinge Pin
--> RV10-List message posted by: "John Kirkland" <jskirkland@webpipe.net>
Page 9-19, Step #2: Bend the hinge pin....
Any danger of the pin cracking/fatiguing at those bends? They look awfully
tight in the figure. Do we have a favorite way of bending it so it doesn't
turn out ugly?
John Kirkland
#40333
Message 18
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
spamd3.ruraltel.net
* -4.0 RCVD_FROM_NEXTECH_4 Message came from 63.163.37-39.x network
* 0.0 UNPARSEABLE_RELAY Informational: message has unparseable relay
* lines
* 0.1 HTML_80_90 BODY: Message is 80% to 90% HTML
* 0.0 HTML_MESSAGE BODY: HTML included in message
* -1.6 BAYES_00 BODY: Bayesian spam probability is 0 to 1%
* 0.6 AWL AWL: From: address is in the auto white-list
| Subject: | Re: Extra parts????? |
Thanks for everybody's replies. I bought the tail kit secondhand from another
builder. The VS and Rud were complete when I got it so It just kinda spooked
me when I seen a part with a VS part number. Anyhow, all's well.
Thanks again,
Bill
----- Original Message -----
From: Randy DeBauw
To: rv10-list@matronics.com
Sent: Monday, August 08, 2005 6:38 PM
Subject: RE: RV10-List: Extra parts?????
Trust me, you will need it but not right now. Keep in your parts and one day
it will come up. Randy
From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bill and Tami Britton
Sent: Monday, August 08, 2005 7:34 AM
To: rv10-list@matronics.com
Subject: Re: RV10-List: Extra parts?????
Here's a picture. Noel, where exactly did you find the part in the builders
manual. I've looked completely through it and I guess I obviously overlooked
it.
Bill
----- Original Message -----
From: Noel & Yoshie Simmons
To: rv10-list@matronics.com
Sent: Monday, August 08, 2005 9:22 AM
Subject: RE: RV10-List: Extra parts?????
It is the front attach point for the Vertical fin. Look in the section for
tail assembly. It is not exactly extra you may want to keep it around a while
longer
Noel
From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bill and Tami Britton
Sent: Monday, August 08, 2005 6:52 AM
To: RV10-list@matronics.com
Subject: RV10-List: Extra parts?????
I am working on my elevators and while looking for some parts last night I
came across a part labeled VS-1016. It also has "#9" written on it with marker.
That part was probably done by the previous builder. Anyway, I've looked
completely through the builders manual and cannot even find mention of this part.
I see parts up to # VS-1015 but not 1016. Does anybody know if this is possibly
just an extra part or did the previous builder forget something???
Bill Britton
RV-10 #40137
Elevators in Progress
PS. I can take some pictures if anybody needs them.
Message 19
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Elevator Hinge Pin |
--> RV10-List message posted by: Deems Davis <deemsdavis@cox.net>
I just finished this and I used two air of pliers with duct tape
covering the serrated edges so as not to leave marks on the pins, seems
to work OK. My bends are just a tad less sharp as those in the figures,
so signs of cracks or fatigue in the metal.
Deems Davis #406
Tailcone
John Kirkland wrote:
> --> RV10-List message posted by: "John Kirkland" <jskirkland@webpipe.net>
>
> Page 9-19, Step #2: Bend the hinge pin....
> Any danger of the pin cracking/fatiguing at those bends? They look
> awfully tight in the figure. Do we have a favorite way of bending it
> so it doesn't turn out ugly?
> John Kirkland
> #40333
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|