---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Wed 11/16/05: 15 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:11 AM - Highlight Two (Matt Dralle) 2. 04:51 AM - Re: Re: Harnesses (Tim Olson) 3. 05:42 AM - Re: Harnesses (William Curtis) 4. 02:17 PM - Re: V speeds for an RV-10 (LIKE2LOOP@aol.com) 5. 02:24 PM - Re: V speeds for an RV-10 (Tim Dawson-Townsend) 6. 02:42 PM - Re: V speeds for an RV-10 (owner-rv10-list-server@matronics.com [mailto) 7. 02:46 PM - Re: V speeds for an RV-10 (Sean Stephens) 8. 02:46 PM - Re: V speeds for an RV-10 (James Ochs) 9. 02:54 PM - Re: V speeds for an RV-10 (owner-rv10-list-server@matronics.com) 10. 02:59 PM - Re: V speeds for an RV-10 (Tim Dawson-Townsend) 11. 05:10 PM - Training (Mark Chamberlain) 12. 05:41 PM - Re: Training (Sean Stephens) 13. 05:56 PM - Re: Training (James Hein) 14. 08:28 PM - Re: V speeds for an RV-10 (Tim Olson) 15. 09:35 PM - Re: Training (DejaVu) ________________________________ Message 1 _____________________________________ Time: 12:11:41 AM PST US From: Matt Dralle Subject: RV10-List: Highlight Two --> RV10-List message posted by: Matt Dralle Dear Listers, Please make a Contribution to support the continued operation and upgrade of the Email List Forums at Matronics. There is no commercial advertising on any of the Lists to support their operation, and it is solely YOUR CONTRIBUTIONS that keeps these Lists up and running. Please take a second to make your Contribution today at the secure website: http://www.matronics.com/contribution Below is a highlight of another one of the awesome Free Gifts available along with this year's List Fund Raiser. In most cases, these gifts have been either donated or provided at exceptional discounts by aviation vendors that participate regularly on these vary same Lists. I want to thank each of them for the generous support of the Lists during this Fund Raiser. Please show your support for their efforts by visiting their respective web sites. Thank you for your kind support! Matt Dralle Matronics Email List Administrator Gift Highlight Number Two - Mechanics's Toolbox CD - Builder's Bookstore * With your $60 or greater List Contribution, you can register to receive a free copy of the 2005 edition of John Schwaner's Mechanic's Toolbox CD. It is essentially a computerized version of the Mechanic's Handbook, and highlights the needs of powerplant technicians working with reciprocating engines. The CD contains two basic sections. The first is a mechanics guide to inspecting, troubleshooting and operating Lycoming and Continental engines. The second is a Mechanic's Toolbox offering many of the most useful items typically found in printed Mechanic's Handbooks and a few other handy items not found anywhere else. Works with Windows 98, ME, NT, 2000, XP. To receive your copy, visit the List Contribution Web site: http://www.matronics.com/contribution * This gift is provided by Andy Gold of The Builder's Bookstore http://www.buildersbooks.com/ do not archive ________________________________ Message 2 _____________________________________ Time: 04:51:53 AM PST US From: Tim Olson Subject: Re: RV10-List: RE: Harnesses --> RV10-List message posted by: Tim Olson I got mine from Hooker Harness. I just asked for some exactly like Randy's and they wrote me the order. I took the knee-banger lug out on the rear seats, so they're 4-pointers. They cost more than Van's, but come in more colors and seem very nice. Tim Olson -- RV-10 #40170 DO NOT ARCHIVE Tim Dawson-Townsend wrote: > Anyone using seatbelt harnesses other than the ones from Van's? Can you share information about your source, including pricing? > > TDT > 40025 > Do not archive > ________________________________ Message 3 _____________________________________ Time: 05:42:58 AM PST US From: "William Curtis" Subject: RV10-List: RE: Harnesses Anyone using seatbelt harnesses other than the ones from Van's? Can you share information about your source, including pricing? I'm looking at the Amsafe 3 point airbag seatbelt for the front seats. These will be pricey at about $1200-2000 per seat but should be worth it. Haven't found a reseller that will sell them to kitbuilders, but I have a while yet. http://www.amsafeaviation.com/inflatablega.htm For the rear, Velocity Aicraft sell a 3 point Inertial reel belt for $87/each. http://www.velocityaircraft.com/Velocity%20Store/interior_and_upholstery.html William 40237 - wings http://wcurtis.nerv10.com/ ________________________________ Message 4 _____________________________________ Time: 02:17:04 PM PST US From: LIKE2LOOP@aol.com Subject: Re: RV10-List: V speeds for an RV-10 In a message dated 11/15/2005 11:50:31 PM Eastern Standard Time, Tdawson@avidyne.com writes: Here's a spreadsheet on weght & Balance, based on the factory weight numbers in the Finish Kit plans: Please re-send as a XLS file. Mine came through as an unreadable .dat file??? Steve Stephen G. Blank,DDS Port St Lucie, FL 772-475-5556 cell ________________________________ Message 5 _____________________________________ Time: 02:24:12 PM PST US Subject: RE: RV10-List: V speeds for an RV-10 From: "Tim Dawson-Townsend" Did anyone else have a problem? TDT Do not archive ________________________________ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of LIKE2LOOP@aol.com Subject: Re: RV10-List: V speeds for an RV-10 In a message dated 11/15/2005 11:50:31 PM Eastern Standard Time, Tdawson@avidyne.com writes: Here's a spreadsheet on weght & Balance, based on the factory weight numbers in the Finish Kit plans: Please re-send as a XLS file. Mine came through as an unreadable .dat file??? Steve Stephen G. Blank,DDS Port St Lucie, FL 772-475-5556 cell ________________________________ Message 6 _____________________________________ Time: 02:42:45 PM PST US Subject: RE: RV10-List: V speeds for an RV-10 Nope - mine came through as a .xls no problem. Ron -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com]On Behalf Of Tim Dawson-Townsend Subject: RE: RV10-List: V speeds for an RV-10 Did anyone else have a problem? TDT Do not archive _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of LIKE2LOOP@aol.com Subject: Re: RV10-List: V speeds for an RV-10 In a message dated 11/15/2005 11:50:31 PM Eastern Standard Time, Tdawson@avidyne.com writes: Here's a spreadsheet on weght & Balance, based on the factory weight numbers in the Finish Kit plans: Please re-send as a XLS file. Mine came through as an unreadable .dat file??? Steve Stephen G. Blank,DDS Port St Lucie, FL 772-475-5556 cell ________________________________ Message 7 _____________________________________ Time: 02:46:07 PM PST US From: Sean Stephens Subject: Re: RV10-List: V speeds for an RV-10 --> RV10-List message posted by: Sean Stephens Ya, I never got it either. -Sean do not archive Tim Dawson-Townsend wrote: > > Did anyone else have a problem? > > > > TDT > > Do not archive > > > > > > > *From:* owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] *On Behalf Of > *LIKE2LOOP@aol.com > *Sent:* Wednesday, November 16, 2005 5:16 PM > *To:* rv10-list@matronics.com > *Subject:* Re: RV10-List: V speeds for an RV-10 > > > > In a message dated 11/15/2005 11:50:31 PM Eastern Standard Time, > Tdawson@avidyne.com writes: > > Here's a spreadsheet on weght & Balance, based on the factory > weight numbers in the Finish Kit plans: > > Please re-send as a XLS file. Mine came through as an unreadable .dat > file??? > > Steve > > > > > > Stephen G. Blank,DDS > Port St Lucie, FL > > 772-475-5556 cell > ________________________________ Message 8 _____________________________________ Time: 02:46:27 PM PST US From: James Ochs Subject: Re: RV10-List: V speeds for an RV-10 --> RV10-List message posted by: James Ochs I got it as a winmail.dat too ;) double do not archive ! Tim Dawson-Townsend wrote: > Did anyone else have a problem? > > > > TDT > > Do not archive > > > ________________________________ Message 9 _____________________________________ Time: 02:54:22 PM PST US Subject: Re: RV10-List: V speeds for an RV-10 --> RV10-List message posted by: "Condrey, Bob (US SSA)" Came through fine for me. Bob -------------------------- Sent from my BlackBerry Wireless Handheld -----Original Message----- From: owner-rv10-list-server@matronics.com Subject: RE: RV10-List: V speeds for an RV-10 Did anyone else have a problem? TDT Do not archive _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of LIKE2LOOP@aol.com Subject: Re: RV10-List: V speeds for an RV-10 In a message dated 11/15/2005 11:50:31 PM Eastern Standard Time, Tdawson@avidyne.com writes: Here's a spreadsheet on weght & Balance, based on the factory weight numbers in the Finish Kit plans: Please re-send as a XLS file. Mine came through as an unreadable .dat file??? Steve Stephen G. Blank,DDS Port St Lucie, FL 772-475-5556 cell ________________________________ Message 10 ____________________________________ Time: 02:59:54 PM PST US Subject: RE: RV10-List: V speeds for an RV-10 From: "Tim Dawson-Townsend" --> RV10-List message posted by: "Tim Dawson-Townsend" Tim Olson: Want to post the XLS file on your web page? I can re-send it if necessary. TDT do not archive -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Sean Stephens Subject: Re: RV10-List: V speeds for an RV-10 --> RV10-List message posted by: Sean Stephens Ya, I never got it either. -Sean do not archive Tim Dawson-Townsend wrote: > > Did anyone else have a problem? > > > > TDT > > Do not archive > > > > > > > *From:* owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] *On Behalf Of > *LIKE2LOOP@aol.com > *Sent:* Wednesday, November 16, 2005 5:16 PM > *To:* rv10-list@matronics.com > *Subject:* Re: RV10-List: V speeds for an RV-10 > > > > In a message dated 11/15/2005 11:50:31 PM Eastern Standard Time, > Tdawson@avidyne.com writes: > > Here's a spreadsheet on weght & Balance, based on the factory > weight numbers in the Finish Kit plans: > > Please re-send as a XLS file. Mine came through as an unreadable .dat > file??? > > Steve > > > > > > Stephen G. Blank,DDS > Port St Lucie, FL > > 772-475-5556 cell > ________________________________ Message 11 ____________________________________ Time: 05:10:40 PM PST US From: "Mark Chamberlain" <10flyer@verizon.net> Subject: RV10-List: Training "Steve Chamberlain" , "John Chamberlain" , "Dean Birnbaum" Pictures from my RV-10 training up in Oregon last week. Went pretty good except for the tendency to flare at 50 FT. Looking forward to posting some pics of my first flight....... hopefully some time in Jan!! ________________________________ Message 12 ____________________________________ Time: 05:41:26 PM PST US From: Sean Stephens Subject: Re: RV10-List: Training --> RV10-List message posted by: Sean Stephens How much does Van's charge for training? -Sean #40303 Mark Chamberlain wrote: > > > Pictures from my RV-10 training up in Oregon last week. Went pretty > good except for the tendency to flare at 50 FT. Looking forward to > posting some pics of my first flight....... hopefully some time in Jan!! > > ________________________________ Message 13 ____________________________________ Time: 05:56:28 PM PST US From: James Hein Subject: Re: RV10-List: Training --> RV10-List message posted by: James Hein At least $34,000.... do not archive Sean Stephens wrote: > --> RV10-List message posted by: Sean Stephens > > How much does Van's charge for training? > > -Sean #40303 > > Mark Chamberlain wrote: > >> >> >> Pictures from my RV-10 training up in Oregon last week. Went pretty >> good except for the tendency to flare at 50 FT. Looking forward to >> posting some pics of my first flight....... hopefully some time in Jan!! >> >> >> > > ________________________________ Message 14 ____________________________________ Time: 08:28:27 PM PST US From: Tim Olson Subject: Re: RV10-List: V speeds for an RV-10 --> RV10-List message posted by: Tim Olson Ok, I have it posted, thanks Tim (TDT). The file is here for anyone that wants it: http://www.myrv10.com/miscphotos/TDT/Weight_&_Balance.zip or http://www.myrv10.com/miscphotos/TDT/Weight_&_Balance.xls Choose your format. Tim Olson -- RV-10 #40170 DO NOT ARCHIVE Tim Dawson-Townsend wrote: > --> RV10-List message posted by: "Tim Dawson-Townsend" > > > Tim Olson: > > Want to post the XLS file on your web page? I can re-send it if > necessary. > > TDT > do not archive > > -----Original Message----- > From: owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Sean Stephens > Sent: Wednesday, November 16, 2005 5:46 PM > To: rv10-list@matronics.com > Subject: Re: RV10-List: V speeds for an RV-10 > > --> RV10-List message posted by: Sean Stephens > > Ya, I never got it either. > > -Sean > > do not archive > > Tim Dawson-Townsend wrote: > >>Did anyone else have a problem? >> >> >> >>TDT >> >>Do not archive >> >> >> >> >> >> > > >>*From:* owner-rv10-list-server@matronics.com >>[mailto:owner-rv10-list-server@matronics.com] *On Behalf Of >>*LIKE2LOOP@aol.com >>*Sent:* Wednesday, November 16, 2005 5:16 PM >>*To:* rv10-list@matronics.com >>*Subject:* Re: RV10-List: V speeds for an RV-10 >> >> >> >>In a message dated 11/15/2005 11:50:31 PM Eastern Standard Time, >>Tdawson@avidyne.com writes: >> >> Here's a spreadsheet on weght & Balance, based on the factory >> weight numbers in the Finish Kit plans: >> >>Please re-send as a XLS file. Mine came through as an unreadable .dat > > >>file??? >> >>Steve >> >> >> >> >> >>Stephen G. Blank,DDS >>Port St Lucie, FL >> >>772-475-5556 cell >> > > > > > > > > > > > > > > > > > > > > > > > > ________________________________ Message 15 ____________________________________ Time: 09:35:06 PM PST US From: "DejaVu" Subject: Re: RV10-List: Training Sounds characteristic of RV's and the light controls. I let the ground effect do 50% of the flare in my -6, somewhat unnerving at first. Anh ----- Original Message ----- From: Mark Chamberlain To: Dan Beintema ; Wilmensink@aol.com ; rv10-list@matronics.com ; Steve Chamberlain ; John Chamberlain ; Dean Birnbaum Sent: Wednesday, November 16, 2005 8:09 PM Subject: RV10-List: Training Pictures from my RV-10 training up in Oregon last week. Went pretty good except for the tendency to flare at 50 FT. Looking forward to posting some pics of my first flight....... hopefully some time in Jan!!