---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sun 12/25/05: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:02 AM - Re: Conversion from inches to millibars (Dave & Brenda Emond) 2. 02:28 AM - Re: Conversion from inches to millibars (Mani Ravee) 3. 07:18 AM - Re: Re: workbench (Jeff Dalton) 4. 08:46 AM - Re: [RV7Yahoo] Re: Conversion from inches to millibars (JohnR) ________________________________ Message 1 _____________________________________ Time: 02:02:06 AM PST US From: "Dave & Brenda Emond" Subject: Re: RV10-List: Conversion from inches to millibars --> RV10-List message posted by: "Dave & Brenda Emond" Can anyone help with the conversion for atmospheric pressure, when converting from inches to millibars. Merry Christmas to all. Dave Emond RV 10 - busy on canopy ________________________________ Message 2 _____________________________________ Time: 02:28:34 AM PST US From: "Mani Ravee" Subject: RE: RV10-List: Conversion from inches to millibars --> RV10-List message posted by: "Mani Ravee" How about one of the online converters: http://www.csgnetwork.com/directbarpresscvt.html or: http://www.convert-me.com/en/convert/pressure Or here for ANYTHING you want to convert: http://www.martindalecenter.com/Calculators.html Mani -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Dave & Brenda Emond Subject: Re: RV10-List: Conversion from inches to millibars --> RV10-List message posted by: "Dave & Brenda Emond" Can anyone help with the conversion for atmospheric pressure, when converting from inches to millibars. Merry Christmas to all. Dave Emond RV 10 - busy on canopy ________________________________ Message 3 _____________________________________ Time: 07:18:55 AM PST US From: "Jeff Dalton" Subject: Re: RV10-List: Re: workbench Dave, That is a EXCELLENT workbench tip. I am going to try that. Thanks! Jeff ----- Original Message ----- From: Dave Lammers To: rv10-list@matronics.com Sent: Saturday, December 24, 2005 3:28 PM Subject: Re: RV10-List: Re: workbench I covered my tables with berber carpet. The small filings, chips, and the occasional errant rivet fall down in between the loops of the carpet and the aluminum skins just float along on top and don't get scratched. I even cut out several several rectangular openings exactly the size of the backrivet plate. I keep the carpet in these slots usually, but when backriveting, I take out the carpet "plug" and put in the backrivet plate. It is the same height as the berber carpet--works great. Vacuum up the small debris on the carpet at the end of the workday. The best of the Christmas season to all the fine folks on this list! Dave Lammers RV-6 N6X RV-10 elevators done today! Larry Rosen wrote: --> RV10-List message posted by: Larry Rosen I cover my tables with cardboard. This way you can lay a part flat and put a cleco in. The cardboard flexes and the cleco grabs the part. Larry bruce breckenridge wrote: --> RV10-List message posted by: bruce breckenridge ... I also covered each top with a couple layers of butcher paper. ... Bruce #18 Text inserted by Panda Platinum 2005 Internet Security: This message has NOT been classified as spam. If it is unsolicited mail (spam), click on the following link to reclassify it: http://127.0.0.1:6083/Panda?IDpav_17368&SPAMtrue ________________________________ Message 4 _____________________________________ Time: 08:46:54 AM PST US From: "JohnR" Subject: RE: [RV7Yahoo] Re: RV10-List: Conversion from inches to millibars Try this (inHg32) * 33.8639 = (mb) JohnR _____ From: Dave & Brenda Emond [mailto:d_emond@mweb.co.za] Subject: [RV7Yahoo] Re: RV10-List: Conversion from inches to millibars Can anyone help with the conversion for atmospheric pressure, when converting from inches to millibars. Merry Christmas to all. Dave Emond RV 10 - busy on canopy Van's Air Force - World Wide Wing www.vansaircraft.net _____ * Visit your group "RV7and7A " on the web. * To unsubscribe from this group, send an email to: RV7and7A-unsubscribe@yahoogroups.com . _____