RV10-List Digest Archive

Sat 12/31/05


Total Messages Posted: 10



Today's Message Index:
----------------------
 
     1. 12:34 AM - QB question (Chris , Susie McGough)
     2. 12:48 AM - Re: Lasar Ignition (Dave & Brenda Emond)
     3. 02:24 AM - Molex crimper (Chris , Susie McGough)
     4. 05:44 AM - Re: Molex crimper (Tim Olson)
     5. 06:24 AM - Re: QB question (Larry Rosen)
     6. 11:16 AM - Rear Spar Webs (Steven D Clark)
     7. 11:57 AM - Re: Rear Spar Webs ()
     8. 01:17 PM - Actual performance of flying RV 10s (David Boone)
     9. 07:34 PM - cradles (Robert G. Wright)
    10. 07:59 PM - Re: A little more fuel for the primer fire (grin) (Eric Panning)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:34:27 AM PST US
    From: "Chris , Susie McGough" <VHMUM@bigpond.com>
    Subject: QB question
    Hi guys I am doing the inventory on the QB and one of the components says spar carry through??? Isnt this the spar that is already on the QB fuse?? Seems strange to itemise this part? Chris Number 272 QB fuse


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:48:09 AM PST US
    From: "Dave & Brenda Emond" <d_emond@mweb.co.za>
    Subject: Re: Lasar Ignition
    Has anyone in the group fitted LASAR ignition to their 10 yet. I am curious to find out possible locations to install the controller box??? Dave Emond # 40159 Still busy on Canopy Mattituck TMXIO 540 should ship mid Jan'06


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:24:08 AM PST US
    From: "Chris , Susie McGough" <VHMUM@bigpond.com>
    Subject: Molex crimper
    Hi all anyone know what crimper we use for the whelan strobes....I know its a molex but there seems to be many types Regards Chris 40388 fuse QB 272


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:44:49 AM PST US
    From: Tim Olson <Tim@MyRV10.com>
    Subject: Re: Molex crimper
    --> RV10-List message posted by: Tim Olson <Tim@MyRV10.com> I think you want the SAT-018 from Steinair. http://www.steinair.com/tools.htm That one should do lots of those types of pins, including the round connectors with the pins with ears. Tim Olson -- RV-10 #40170 DO NOT ARCHIVE Chris , Susie McGough wrote: > Hi all anyone know what crimper we use for the whelan strobes....I know > its a molex but there seems to be many types > > Regards Chris 40388 fuse QB 272


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:24:31 AM PST US
    From: Larry Rosen <LarryRosen@comcast.net>
    Subject: Re: QB question
    --> RV10-List message posted by: Larry Rosen <LarryRosen@comcast.net> You are correct. It is already installed in the fuselage. I had the same question. When I spoke with Vans (along with other questions) there response was, "Its the big gold thing that runs through the fuselage." I am not sure why they have it as an itemized part. Larry Rosen <http://lrosen.nerv10.com> Chris , Susie McGough wrote: > Hi guys I am doing the inventory on the QB and one of the components > says spar carry through??? Isnt this the spar that is already on the > QB fuse?? Seems strange to itemise this part? > > Chris Number 272 QB fuse


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:16:47 AM PST US
    Subject: Rear Spar Webs
    From: Steven D Clark <stevendclark@juno.com>
    --> RV10-List message posted by: Steven D Clark <stevendclark@juno.com> My rear spar webs for my project apparently did not arrive when I bought my wing kit from another builder. I now need to get the pieces, but the shipping (by truck) to Indiana is very expensive. Is anyone aware of a wing or fuselage shipment (RV-10 or otherwise) that is coming to the central/southern In/southern IL/ western KY region that I could potentially piggyback with? I'm not in a big rush, but I'd like to get them sometime in the next 3 months . Thanks, Steve Clark (Leading Edges)


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:57:01 AM PST US
    From: <millstees@ameritech.net>
    Subject: Re: Rear Spar Webs
    --> RV10-List message posted by: <millstees@ameritech.net> Steve: My RV-10 Slo-Build wing kit is scheduled to ship the week of January 2, to my home in Naperville, IL. I would be happy to accomodate you any way that works. You can email me at: millstees@ameritech.net. Steve Mills 40486 Finishing the empennage kit ----- Original Message ----- From: "Steven D Clark" <stevendclark@juno.com> Subject: RV10-List: Rear Spar Webs > --> RV10-List message posted by: Steven D Clark <stevendclark@juno.com> > > My rear spar webs for my project apparently did not arrive when I bought > my wing kit from another builder. I now need to get the pieces, but the > shipping (by truck) to Indiana is very expensive. Is anyone aware of a > wing or fuselage shipment (RV-10 or otherwise) that is coming to the > central/southern In/southern IL/ western KY region that I could > potentially piggyback with? I'm not in a big rush, but I'd like to get > them sometime in the next 3 months . > Thanks, Steve Clark (Leading Edges) > >


    Message 8


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 01:17:37 PM PST US
    From: "David Boone" <david555@cox.net>
    Subject: Actual performance of flying RV 10s
    Any of you guys out there that are actually flying care to give us guys some real life performance and comments about your rv 10 flying experiences. Thanks David Boone #138


    Message 9


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:34:31 PM PST US
    From: "Robert G. Wright" <armywrights@adelphia.net>
    Subject: cradles
    Looking for simple schematic on constructing wing cradles and fuse stands for QB kit. If I send for the preview plans, does Van's provide an example? I got my letter today saying delivery of QB wings/fuse in April. When can I realistically expect it? Past experience from reading the list says they may come as early as two months from projected date. Rob Wright #392 Tailcone


    Message 10


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:59:22 PM PST US
    From: Eric Panning <ericmpmail-rv10@yahoo.com>
    Subject: Re: A little more fuel for the primer fire (grin)
    --> RV10-List message posted by: Eric Panning <ericmpmail-rv10@yahoo.com> Presentation with more info about the DEFT system (and Al corrosion in general) http://www.dodconf.swri.org/2004Papers/Presentations/Morris.pps#37 Note, http://www.deftfinishes.com/ domain registration expired 12/25/05. Looks like someone is going to have an extra christmas "present" when they come back to work.... :) Do not archive --- Bowen Miles <cessna170bdriver@yahoo.com> wrote: > This was in our newsletter here at the Air Force > Research Lab: > > > http://www.afrl.af.mil/news/dec05/features/af_develops.pdf >




    Other Matronics Email List Services

  • Post A New Message
  •   rv10-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/RV10-List.htm
  • Full Archive Search Engine
  •   http://www.matronics.com/search
  • 7-Day List Browse
  •   http://www.matronics.com/browse/rv10-list
  • Browse RV10-List Digests
  •   http://www.matronics.com/digest/rv10-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contributions

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --