----------------------------------------------------------
                           RV10-List Digest Archive
                                      ---
                     Total Messages Posted Fri 03/31/06: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 09:09 AM - Re: Re: Re: Aileron Boots  ()
     2. 02:45 PM - Kitplanes, May, Peternel RV-9A  (Albert Gardner)
     3. 02:55 PM - Re: Re: Aileron Boots  (Randy DeBauw)
 
 
 
________________________________  Message 1  _____________________________________


Time: 09:09:24 AM PST US
From: <jim@CombsFive.Com>
Subject: Re: Re: RV10-List: Re: Aileron Boots

--> RV10-List message posted by: <jim@combsfive.com>

Tim, Larry, 

Great information, (as always)

Thanks, 

Jim C

Do Not Archive
============================================================
From: Larry Rosen <LarryRosen@comcast.net>
Subject: Re: RV10-List: Re: Aileron Boots

--> RV10-List message posted by: Larry Rosen <LarryRosen@comcast.net>

Just checked out the MSDS sheets for the permatex blue 6B and 26B  and 
both say "When this product is exposed to moisture acetic acid may be 
formed"  I assume that this is prior to drying.  But the red is 
recommended by vans and the blue is sensor safe.

Both the Ultra blue and the Ultra Copper (high temp) do not have acetic 
acid mentioned on their MSDS.

Link here 
<http://www.permatex.com/products/automotive/automotive_gasketing/gasket_makers.htm>

Larry


============================================================


________________________________  Message 2  _____________________________________


Time: 02:45:17 PM PST US
From: "Albert Gardner" <ibspud@adelphia.net>
Subject: RV10-List: Kitplanes, May, Peternel RV-9A

--> RV10-List message posted by: "Albert Gardner" <ibspud@adelphia.net>

For those of you who are not subscribed to Kitplanes, there is a very nice
article on Stan Peternel's flying RV-9A in the May issue.
Albert Gardner
Yuma, AZ


________________________________  Message 3  _____________________________________


Time: 02:55:07 PM PST US
Subject: RE: RV10-List: Re: Aileron Boots
From: "Randy DeBauw" <Randy@abros.com>

--> RV10-List message posted by: "Randy DeBauw" <Randy@abros.com>

I have never been cold in the RV10 but it may be the area I live in. In
Tim's town you may need them.  I have the AWI exhaust system and from
what I understand it puts out the most heat as well.  Randy 

-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of zackrv8
Sent: Thursday, March 30, 2006 5:24 AM
Subject: RV10-List: Re: Aileron Boots

--> RV10-List message posted by: "zackrv8" <zackrv8@verizon.net>

Roger,

  If the RV10 is anything like the RV8, I would highly recommend
installing the aileron booties.  I flew my RV8 initially without them
(froze my a$$ off) and after installing them, noticed a huge
improvement!  The air finds it way into the cockpit around the aileron
tubes.  Maybe Tim can give us a report living up there in WI?

Joe

--------
RV8 #80125
RV10 # 40512


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=25240#25240