----------------------------------------------------------
                           RV10-List Digest Archive
                                      ---
                     Total Messages Posted Wed 05/31/06: 4
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 04:14 AM - Re: CI-122  (rv10builder)
     2. 09:42 AM - Back Seat Folding  (Dave Saylor)
     3. 10:41 PM - Re: Back Seat Folding  (Deems Davis)
     4. 11:56 PM - prop spacer  (Steven DiNieri)
 
 
 
________________________________  Message 1  _____________________________________


Time: 04:14:38 AM PST US
From: rv10builder <rv10builder@bellsouth.net>
Subject: Re: RV10-List: CI-122

--> RV10-List message posted by: rv10builder <rv10builder@bellsouth.net>

Yes they are; however I have a taker already.  Thanks for all of the 
responses!

Jesse Saint wrote:

>Are these the bent whip antennas?  If so (I will check the other one I have
>in the morning on Wednedsay), I will take both of them.
>
>Thanks and GOD BLESS!
>
>Jesse Saint
>I-TEC, Inc.
>jesse@itecusa.org
>www.itecusa.org
>W: 352-465-4545
>C: 352-427-0285
>
>-----Original Message-----
>From: owner-rv10-list-server@matronics.com
>[mailto:owner-rv10-list-server@matronics.com] On Behalf Of rv10builder
>Sent: Monday, May 29, 2006 10:59 PM
>To: rv10-list@matronics.com
>Subject: RV10-List: CI-122
>
>--> RV10-List message posted by: rv10builder <rv10builder@bellsouth.net>
>
>I have decided to take a different route with respect to COM antennas, 
>so I have two brand new COMANT CI-122 VHF antennas still in the boxes 
>that I will let go for $100 ea. (+ shipping).  Cost me $125 new each 
>from ACS.   Contact me off board if interested...
>
>Brian
>#40308
>http://www.mykitlog.com/rv10builder
>
>
> 
> 
> 
>
>
>  
>


________________________________  Message 2  _____________________________________


Time: 09:42:50 AM PST US
From: "Dave Saylor" <Dave@AirCraftersLLC.com>
Subject: RV10-List: Back Seat Folding

Would it be useful to build the back seats a little narrower (about 1/2") so
they fold down flat between the seat belt tabs?  Seems like an easy thing to
do to add some versatility to loading.  Am I missing something?

Dave Saylor
AirCrafters LLC
831-722-9141

________________________________  Message 3  _____________________________________


Time: 10:41:34 PM PST US
From: Deems Davis <deemsdavis@cox.net>
Subject: Re: RV10-List: Back Seat Folding

--> RV10-List message posted by: Deems Davis <deemsdavis@cox.net>

FWIW     I also thought about a different mounting of the rear seats to 
accomplish the same thing (ie. fold flat), then someone pointed out to 
me that with the current mounting hinge split into 2 'pins' removing the 
entire seat is a realtively simple thing to do. For the few times that I 
need the seat comepletely flat, I decided it's easier to stick with the 
current design, and put/reinsert the hinge pins, than to make a mod.

Deems Davis # 406
Fuse
http://deemsrv10.com/

Dave Saylor wrote:

> Would it be useful to build the back seats a little narrower (about 
> 1/2") so they fold down flat between the seat belt tabs?  Seems like 
> an easy thing to do to add some versatility to loading.  Am I missing 
> something?
>  
> Dave Saylor
> AirCrafters LLC
> 831-722-9141


________________________________  Message 4  _____________________________________


Time: 11:56:58 PM PST US
From: "Steven DiNieri" <capsteve@adelphia.net>
Subject: RV10-List: prop spacer

--> RV10-List message posted by: "Steven DiNieri" <capsteve@adelphia.net>

Does anyone know the dimensions of a hartzel hub? I'd like to make a spacer
to mount the spinner backplate and fit the cowling. 
steve 

--