---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sat 06/23/07: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:57 AM - Re: audio panel location question (gary) 2. 06:05 AM - Re: Re:audio panel location question (gary) 3. 02:53 PM - [ Bill Reining ] : New Email List Photo Share Available! (Email List Photo Shares) 4. 06:00 PM - Boeing surplus Mesa? (Deems Davis) 5. 06:05 PM - Potential Gotcha on HS stabilizer attachment (looking for comments) (Dsyvert@aol.com) 6. 09:44 PM - Re: Potential Gotcha on HS stabilizer attachment (looking for comments) (KiloPapa) ________________________________ Message 1 _____________________________________ Time: 05:57:03 AM PST US From: "gary" Subject: RE: RV10-List: audio panel location question The Audio panel traditionally has been at the top because it is not very deep from front to back and the top is tapered down to allow for the glare shield to slope. Thus you would use minimal space for it and it is space that other radios could not use. That is my story and I am sticking to it. Gary 40274 -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of linn Walters Sent: Friday, June 22, 2007 8:44 PM Subject: Re: RV10-List: audio panel location question Chris Johnston wrote: > >Hey all - > >In the interest of keeping my tradition of stupid questions alive, >here's a new one...or two... > >Is there a reason that people put the audio panel at the top of the >radio stack? I mean besides because that's where everybody puts it? > This is a real SWAG ...... but along with the audio switches were the marker beacon lights ..... and being up high made it easier to keep in the scan. That's about all the reasons I can think of. >I'm thinking (overthinking) about it this way... if you are selecting >what radio you're listening to and you've got your hand at the audio >panel, it's in the way of seeing the radios and what frequency they're >tuned to... I'm not fishing for a long preposterous discussion. Just a >good reason not to put the audio panel below the radios. Anyone got >one? > With the exception of above, I can't think of one. But how often do you switch radios anyway? With flip/flop radios, you always have the next or last freq on the inactive side, so switching single-display radios is history. Most of the hi9gh-time pilots I fly with use one primary radio almost exclusively for 2-way comms, and use the second radio to listen to ATIS and stuff like that. I can't separate two radios talking in my ear, so I don't put the speaker (headphones) on both. Linn do not archive > >Also, is there a reason people don't countersink the mounting holes for >instruments? Other than the fact that it's more work for no reason? > >Hooray for silly questions! > > >cj > >#40410 >fuse/finishing >www.perfectlygoodairplane.net >do not archive > > > > ________________________________ Message 2 _____________________________________ Time: 06:05:43 AM PST US From: "gary" Subject: RE: RV10-List: Re:audio panel location question I can assure you it will be done on Tuesday. We just don't know which month. Gary -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Sheldon Olesen Sent: Friday, June 22, 2007 11:54 PM Subject: RV10-List: Re:audio panel location question Chris, I couldn't think of a good reason to put the audio panel on top to the stack so I didn't. There is a very good reason not to put it on top. The length of the audio panel (PSE 7000) is much shorter than the radios below and maintenance or wiring changes would be very difficult. Sheldon Olesen #40080 Decided Oct finishing impractical, now looking at Dec ________________________________ Message 3 _____________________________________ Time: 02:53:20 PM PST US Subject: RV10-List: [ Bill Reining ] : New Email List Photo Share Available! From: Email List Photo Shares A new Email List Photo Share is available: Poster: Bill Reining Lists: RV-List,RV10-List Subject: QB Delivery by Partain Transport http://www.matronics.com/photoshare/wreining@gmail.com.06.23.2007/index.html ---------------------------------------------------------- o Main Photo Share Index http://www.matronics.com/photoshare o Submitting a Photo Share If you wish to submit a Photo Share of your own, please include the following information along with your email message and files: 1) Email List or Lists that they are related to: 2) Your Full Name: 3) Your Email Address: 4) One line Subject description: 5) Multi-line, multi-paragraph description of topic: 6) One-line Description of each photo or file: Email the information above and your files and photos to: pictures@matronics.com ---------------------------------------------------------- ________________________________ Message 4 _____________________________________ Time: 06:00:33 PM PST US From: Deems Davis Subject: RV10-List: Boeing surplus Mesa? David, John Cox was here visiting and he made mention that he thought that Boeing had a retail surplus store in Mesa. Do you know if this is true? If so what are hours of operation and what type of merchandise do they typically have? Thanks Deems > *================================= > > * ________________________________ Message 5 _____________________________________ Time: 06:05:49 PM PST US From: Dsyvert@aol.com Subject: RV10-List: Potential Gotcha on HS stabilizer attachment (looking for comments) Group, Attached is a problem that I had, and would never have caught had I not had an experience builder look over my project. It is not the type of thing I would think most builders would catch or understand the implications unless they would know that there could be an issue. Please review what I have put together and comment. Sorry that the drawings and explanation may not be completely clear so I would like to hear you comments and will change based on everyone's feedback. Dave Syvertson 40625 ************************************** See what's free at http://www.aol.com. ________________________________ Message 6 _____________________________________ Time: 09:44:45 PM PST US From: "KiloPapa" Subject: Re: RV10-List: Potential Gotcha on HS stabilizer attachment (looking for comments) Thanks for taking the time to do the write-up. As I am not there yet I will take note of it when the time comes. Kevin 40494 tail/empennage do not archive ------------------------------------------------------------------------- ------- ----- Original Message ----- Subject: RV10-List: Potential Gotcha on HS stabilizer attachment (looking for comments) Group, Attached is a problem that I had, and would never have caught had I not had an experience builder look over my project. It is not the type of thing I would think most builders would catch or understand the implications unless they would know that there could be an issue. Please review what I have put together and comment. Sorry that the drawings and explanation may not be completely clear so I would like to hear you comments and will change based on everyone's feedback. Dave Syvertson 40625 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.