---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Fri 07/27/07: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:15 PM - Re: Moving, must sell RV-10 (Michael Lefever) 2. 07:51 PM - Re: Moving, must sell RV-10 (Kelly McMullen) 3. 09:04 PM - Re: Moving, must sell RV-10 (Michael Lefever) ________________________________ Message 1 _____________________________________ Time: 07:15:17 PM PST US From: "Michael Lefever" Subject: Re: RV10-List: Moving, must sell RV-10 Ed. I am in Phoenix and just got back from OSH this evening.............I am 75% through my RV 10 with only 75% to go. I may be interested in lining up another to start someday. I assume your 10 kit is a "flat" kit rather than any quickbuild sections? I assume no firewall forward either? When you say the tail kit is mostly done can you describe that or send me photos? Thanks Mike Lefever From: edwisch@cableone.net To: rv10-list@matronics.com ; rv-list@matronics.com Sent: Thursday, July 26, 2007 11:30 AM Subject: RV10-List: Moving, must sell RV-10 QB "edwisch@cableone.net" > * Tail kit is mostly done -- and no smileys!! very good workmanship, although you might choose to look at two boo-boos in the horizontal tail, but if you don't like it, those parts are only $500 or so. * Virtually nothing done on the wings or fuselage * No finishing kit -- it went to a neighbor's RV-10 Kit is in Prescott, AZ, $23,000, several thousand less than Van's price Also selling an AirCam, $78,000, 200 hours and a cherry straight tail Cessna, http://www.greatusermanuals.com/c175/, $60,000 edwisch@alum.mit.edu 928 533-9351 (cell) ---- Msg sent via CableONE.net MyMail - http://www.cableone.net http://www.matronics.com/Navigator?RV10-List ________________________________ Message 2 _____________________________________ Time: 07:51:21 PM PST US From: "Kelly McMullen" Subject: Re: RV10-List: Moving, must sell RV-10 Mike, I would guess since he describes it as a QB and mentions wings and fuselage, that he is just about where you are, maybe not quite as far. I'm probably interested as well, although I'm not in a position to act on it for at least a couple weeks. Heck, wanna turn your hangar into AZ RV-10 central?? ;-p On 7/27/07, Michael Lefever wrote: > > > Ed. I am in Phoenix and just got back from OSH this evening.............I am > 75% through my RV 10 with only 75% to go. I may be interested in lining up > another to start someday. > > I assume your 10 kit is a "flat" kit rather than any quickbuild sections? > > I assume no firewall forward either? > > When you say the tail kit is mostly done can you describe that or send me > photos? > > Thanks > > Mike Lefever > > From: edwisch@cableone.net > > To: rv10-list@matronics.com ; rv-list@matronics.com > Sent: Thursday, July 26, 2007 11:30 AM > Subject: RV10-List: Moving, must sell RV-10 QB > > > > * Tail kit is mostly done -- and no smileys!! very good workmanship, > although you might choose to look at two boo-boos in > the horizontal tail, but if you don't like it, those parts are only $500 or > so. > * Virtually nothing done on the wings or fuselage > * No finishing kit -- it went to a neighbor's RV-10 > > Kit is in Prescott, AZ, $23,000, several thousand less than Van's price > > Also selling an AirCam, $78,000, 200 hours > and a cherry straight tail Cessna, > http://www.greatusermanuals.com/c175/, $60,000 > > edwisch@alum.mit.edu > 928 533-9351 (cell) > > ---- Msg sent via CableONE.net MyMail - http://www.matronic > available via > title=http://forums.matronics.com/ > href="http://forums.matronics.com">http://forums.matronics.com > > ________________________________ Message 3 _____________________________________ Time: 09:04:35 PM PST US From: "Michael Lefever" Subject: Re: RV10-List: Moving, must sell RV-10 I made a mistake and replied to the whole list versus just Ed but I guess most will forgive. I need another unfinished kit like I need a whole in the head but have done some kit trading in the past and this is a pretty good (starting) price and its easy to go get just being up in Prescott. I just went to Osh with my dad and then we spent some hours in Missouri working on his RV7 he is finishing so I got fired up go back to work on the 10 as the temps cool. I also passed my check ride just prior to leaving town so I will have some more time now as I was flying about 10 hours a week over the last 6 weeks getting tuned up. ----- Original Message ----- From: Kelly McMullen To: rv10-list@matronics.com Sent: Friday, July 27, 2007 7:48 PM Subject: Re: RV10-List: Moving, must sell RV-10 > Mike, I would guess since he describes it as a QB and mentions wings and fuselage, that he is just about where you are, maybe not quite as far. I'm probably interested as well, although I'm not in a position to act on it for at least a couple weeks. Heck, wanna turn your hangar into AZ RV-10 central?? ;-p On 7/27/07, Michael Lefever > wrote: > > > > Ed. I am in Phoenix and just got back from OSH this evening.............I am > 75% through my RV 10 with only 75% to go. I may be interested in lining up > another to start someday. > > I assume your 10 kit is a "flat" kit rather than any quickbuild sections? > > I assume no firewall forward either? > > When you say the tail kit is mostly done can you describe that or send me > photos? > > Thanks > > Mike Lefever > > From: edwisch@cableone.net > > To: rv10-list@matronics.com ; rv-list@matronics.com > Sent: Thursday, July 26, 2007 11:30 AM > Subject: RV10-List: Moving, must sell RV-10 QB > "edwisch@cableone.net" > > > > * Tail kit is mostly done -- and no smileys!! very good workmanship, > although you might choose to look at two boo-boos in > the horizontal tail, but if you don't like it, those parts are only $500 or > so. > * Virtually nothing done on the wings or fuselage > * No finishing kit -- it went to a neighbor's RV-10 > > Kit is in Prescott, AZ, $23,000, several thousand less than Van's price > > Also selling an AirCam, $78,000, 200 hours > and a cherry straight tail Cessna, > http://www.greatusermanuals.com/c175/, $60,000 > > edwisch@alum.mit.edu > 928 533-9351 (cell) > > ---- Msg sent via CableONE.net MyMail - http://www.matronic > available via > title=http://forums.matronics.com/ > href="http://forums.matronics.com">http://forums.matronics.comhttp://forums.matronics.com> > > > > > > > > http://www.matronics.com/Navigator?RV10-List ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.