---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Thu 09/06/07: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:29 AM - Re: RV10 Door seals (Rob Kermanj) 2. 08:03 AM - Rosen Visors (Jesse Saint) 3. 09:13 AM - Re: Rosen Visors (RV Builder (Michael Sausen)) 4. 01:27 PM - Re: Rosen Visors (John Dunne) 5. 01:31 PM - Re: Rosen Visors (John Dunne) 6. 01:47 PM - Re: Rosen Visors (Robin Marks) 7. 03:32 PM - Re: Rosen Visors (John Dunne) 8. 07:40 PM - Another one begins #40761 (n277dl) 9. 08:07 PM - Re: Another one begins #40761 (John W. Cox) ________________________________ Message 1 _____________________________________ Time: 07:29:36 AM PST US From: Rob Kermanj Subject: Re: RV10-List: RV10 Door seals Kevin, I have not noticed an appreciable amount of compression in the door seals. I would sand the gutter to get a better fit. Be careful though, you need to be able to get a good seal. Another possibility is to fill the cabin top to match the door edge or combination of both. Whatever you decide, do it now because it does fit any better on it's own. My door fits a whole lot better with this seal than the supplied seal with the kit but it is not perfect. Rob do not archive On Sep 5, 2007, at 11:26 PM, John Testement wrote: > > > Rob, > > Once you put the seal in, how much adjustment did you have to make > to the > channels to get the doors to close. I had a perfect door fit and > when I put > the seal on (from Brown) the door stood out about 1/4 inch (others > told me > I'd have this problem). I want to know if the seal will compress > and the > doors fit after some time, or if I should sand out the channels > some to get > the doors to sit flush. What have others done? > > John Testement > jwt@roadmapscoaching.com > 40321 > Richmond, VA > Paint prep, interior, and LOTS of little stuff > do not archive > > > -----Original Message----- > From: owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Rob Kermanj > Sent: Sunday, June 10, 2007 7:19 AM > To: rv10-list@matronics.com > Subject: Re: RV10-List: RV10 Doors Video > > > Kevin, I used Bulb seal, Item BA-1900010 from Brown Aircraft > Supply in > Jacksonville, FL. 904-396-6655. The only thing I don't like about > it is > that it leaves a black mark that I clean once in a while. However, > the > doors operate nicely and they are sealed. You also need Rubber and > Gasket > Adhesive by 3M, part 1300L to attach this thing. > > You may want to get their one page catalog and make your own > determination. > I think that they only sell door seals. > > Rob. > > 10:36 PM > > ________________________________ Message 2 _____________________________________ Time: 08:03:45 AM PST US From: "Jesse Saint" Subject: RV10-List: Rosen Visors For those who didn't get in on the group buy for Rosen Visors, I have a few extra here. Contact me off the list if you are interested. Do not archive. Jesse Saint Saint Aviation, Inc. jesse@saintaviation.com www.saintaviation.com Cell: 352-427-0285 Fax: 815-377-3694 ________________________________ Message 3 _____________________________________ Time: 09:13:00 AM PST US From: "RV Builder (Michael Sausen)" Subject: RE: RV10-List: Rosen Visors Also, there is the visors that Alex is selling for considerably less than t he Rosens. http://www.aviationtechproducts.com/html/new_products.html From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@m atronics.com] On Behalf Of Jesse Saint Sent: Thursday, September 06, 2007 10:00 AM Subject: RV10-List: Rosen Visors For those who didn't get in on the group buy for Rosen Visors, I have a few extra here. Contact me off the list if you are interested. Jesse Saint Saint Aviation, Inc. jesse@saintaviation.com www.saintaviation.com Cell: 352-427-0285 Fax: 815-377-3694 ________________________________ Message 4 _____________________________________ Time: 01:27:48 PM PST US From: "John Dunne" Subject: Re: RV10-List: Rosen Visors Hi Jesse, I would like a set of visors. Let me know how much and how to pay you and I can give you my Fedex account for freight forwarding to me. Do you use Paypal? Best regards, John 40315 Australia. ----- Original Message ----- From: Jesse Saint To: rv10-list@matronics.com Sent: Friday, September 07, 2007 12:59 AM Subject: RV10-List: Rosen Visors For those who didn't get in on the group buy for Rosen Visors, I have a few extra here. Contact me off the list if you are interested. Do not archive. Jesse Saint Saint Aviation, Inc. jesse@saintaviation.com www.saintaviation.com Cell: 352-427-0285 Fax: 815-377-3694 ________________________________ Message 5 _____________________________________ Time: 01:31:13 PM PST US From: "John Dunne" Subject: Re: RV10-List: Rosen Visors My apologies to the list.....should have directed to Jesse John 40315 ----- Original Message ----- From: John Dunne To: rv10-list@matronics.com Sent: Friday, September 07, 2007 6:26 AM Subject: Re: RV10-List: Rosen Visors Hi Jesse, I would like a set of visors. Let me know how much and how to pay you and I can give you my Fedex account for freight forwarding to me. Do you use Paypal? Best regards, John 40315 Australia. ----- Original Message ----- From: Jesse Saint To: rv10-list@matronics.com Sent: Friday, September 07, 2007 12:59 AM Subject: RV10-List: Rosen Visors For those who didn't get in on the group buy for Rosen Visors, I have a few extra here. Contact me off the list if you are interested. Do not archive. Jesse Saint Saint Aviation, Inc. jesse@saintaviation.com www.saintaviation.com Cell: 352-427-0285 Fax: 815-377-3694 href="http://www.matronics.com/Navigator?RV10-List">http://www.matronic s.com/Navigator?RV10-List href="http://forums.matronics.com">http://forums.matronics.com ________________________________ Message 6 _____________________________________ Time: 01:47:53 PM PST US Subject: RE: RV10-List: Rosen Visors From: "Robin Marks" John, you can make it up to us by sharing your FedEx number with the list. Thanks in advance, Robin J Do Not Archive From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of John Dunne Sent: Thursday, September 06, 2007 1:30 PM Subject: Re: RV10-List: Rosen Visors My apologies to the list.....should have directed to Jesse John 40315 ----- Original Message ----- From: John Dunne To: rv10-list@matronics.com Sent: Friday, September 07, 2007 6:26 AM Subject: Re: RV10-List: Rosen Visors Hi Jesse, I would like a set of visors. Let me know how much and how to pay you and I can give you my Fedex account for freight forwarding to me. Do you use Paypal? Best regards, John 40315 Australia. ----- Original Message ----- From: Jesse Saint To: rv10-list@matronics.com Sent: Friday, September 07, 2007 12:59 AM Subject: RV10-List: Rosen Visors For those who didn't get in on the group buy for Rosen Visors, I have a few extra here. Contact me off the list if you are interested. Do not archive. Jesse Saint Saint Aviation, Inc. jesse@saintaviation.com www.saintaviation.com Cell: 352-427-0285 Fax: 815-377-3694 href="http://www.matronics.com/Navigator?RV10-List">http://www.matronic s .com/Navigator?RV10-List href="http://forums.matronics.com">http://forums.matronics.com href="http://www.matronics.com/Navigator?RV10-List">http://www.matronic s .com/Navigator?RV10-List href="http://forums.matronics.com">http://forums.matronics.com ________________________________ Message 7 _____________________________________ Time: 03:32:41 PM PST US From: "John Dunne" Subject: RE: RV10-List: Rosen Visors Robin, I can do better than that.. If anyone on the list would like something from Australia we can send it back with Airforce One. Shouldn't be too hard. John 40315 Do not archive _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Robin Marks Sent: Friday, 7 September 2007 6:46 AM Subject: RE: RV10-List: Rosen Visors John, you can make it up to us by sharing your FedEx number with the list. Thanks in advance, Robin :-) Do Not Archive From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of John Dunne Sent: Thursday, September 06, 2007 1:30 PM Subject: Re: RV10-List: Rosen Visors My apologies to the list.....should have directed to Jesse John 40315 ----- Original Message ----- From: John Dunne Sent: Friday, September 07, 2007 6:26 AM Subject: Re: RV10-List: Rosen Visors Hi Jesse, I would like a set of visors. Let me know how much and how to pay you and I can give you my Fedex account for freight forwarding to me. Do you use Paypal? Best regards, John 40315 Australia. ----- Original Message ----- From: Jesse Saint Sent: Friday, September 07, 2007 12:59 AM Subject: RV10-List: Rosen Visors For those who didn't get in on the group buy for Rosen Visors, I have a few extra here. Contact me off the list if you are interested. Do not archive. Jesse Saint Saint Aviation, Inc. jesse@saintaviation.com www.saintaviation.com Cell: 352-427-0285 Fax: 815-377-3694 href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com /Navigator?RV10-List href="http://forums.matronics.com">http://forums.matronics.com href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com /Navigator?RV10-List href="http://forums.matronics.com">http://forums.matronics.com http://www.matronics.com/Navigator?RV10-List http://forums.matronics.com ________________________________ Message 8 _____________________________________ Time: 07:40:50 PM PST US Subject: RV10-List: Another one begins #40761 From: "n277dl" Well guys & gals the building begins again for me. I built a 7A with first flight in 2004. Have about 550 hrs on it but now it's time for a more roomy XC edition. The tail kit arrived this afternoon so I've spent the last couple hours getting the big pieces out and inventoried. Did slow build on the -7A but will probably go QB on the -10. I've met a few of you up at Boone as I'm located in Muscatine, IA. My son lives in Boone so the plane ends up there frequently. Interesting (at least for me) bit of useless information... the night I filled out the order form for the 7A was the first time the four seat plane was discussed on Vans web site. I called the next morning before faxing the order for the 7A in and asked about the four seater but was told it would be a couple years before it was in production. I couldn't wait that long to begin building so we decided to build the two seater and if the four seater made it and lived up to expecations and if we could complete the two seater we'd do it again. It did, we did so here we go again. Doug www.oncloud7.com/rv7.htm 10 builder #40761 7A flyer 550hrs -------- Doug RV7A flying ~500hrs Read this topic online here: http://forums.matronics.com/viewtopic.php?p=133186#133186 ________________________________ Message 9 _____________________________________ Time: 08:07:07 PM PST US Subject: RE: RV10-List: Another one begins #40761 From: "John W. Cox" Always great to have another in the pursuit. And a Repeat Offender to boot. John Cox Do not Archive -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of n277dl Sent: Thursday, September 06, 2007 7:40 PM Subject: RV10-List: Another one begins #40761 Well guys & gals the building begins again for me. I built a 7A with first flight in 2004. Have about 550 hrs on it but now it's time for a more roomy XC edition. The tail kit arrived this afternoon so I've spent the last couple hours getting the big pieces out and inventoried. Did slow build on the -7A but will probably go QB on the -10. I've met a few of you up at Boone as I'm located in Muscatine, IA. My son lives in Boone so the plane ends up there frequently. Interesting (at least for me) bit of useless information... the night I filled out the order form for the 7A was the first time the four seat plane was discussed on Vans web site. I called the next morning before faxing the order for the 7A in and asked about the four seater but was told it would be a couple years before it was in production. I couldn't wait that long to begin building so we decided to build the two seater and if the four seater made it and lived up to expecations and if we could complete the two seater we'd do it again. It did, we did so here we go again. Doug www.oncloud7.com/rv7.htm 10 builder #40761 7A flyer 550hrs -------- Doug RV7A flying ~500hrs Read this topic online here: http://forums.matronics.com/viewtopic.php?p=133186#133186 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.