---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sun 12/30/07: 12 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:47 AM - Emailing: IMG_0927, IMG_0932, IMG_0935, IMG_0938 (David McNeill) 2. 10:03 AM - Re: Emailing: IMG_0927, IMG_0932, IMG_0935, IMG_0938 (gary) 3. 10:28 AM - Re: Emailing: IMG_0927, IMG_0932, IMG_0935, IMG_0938 (Carl Froehlich) 4. 10:44 AM - Re: Emailing: IMG_0927, IMG_0932, IMG_0935, IMG_0938 (David McNeill) 5. 11:26 AM - Static line and ADAHRS connection - where do you make it? (MauleDriver) 6. 01:02 PM - Wayne's interior (Dawson-Townsend,Timothy) 7. 01:29 PM - Re: Static line and ADAHRS connection - where do you make it? (Larry Rosen) 8. 01:40 PM - Re: Static line and ADAHRS connection - where do you make it? (John Testement) 9. 04:01 PM - Re: Static line and ADAHRS connection - where do you make it? (Tim Olson) 10. 07:44 PM - Need wiring diagram for aileron trim (johngoodman) 11. 07:53 PM - Re: Need wiring diagram for aileron trim (Rene) 12. 08:00 PM - Re: Need wiring diagram for aileron trim (Rene) ________________________________ Message 1 _____________________________________ Time: 09:47:00 AM PST US From: "David McNeill" Subject: RV10-List: Emailing: IMG_0927, IMG_0932, IMG_0935, IMG_0938 Another milestone this morning. The trip to the airport was about 2 miles at 0600 on city streets. All the other parts are ready at the hangaar. Hopefully March. Your message is ready to be sent with the following file or link attachments: IMG_0927 IMG_0932 IMG_0935 IMG_0938 ________________________________ Message 2 _____________________________________ Time: 10:03:08 AM PST US From: "gary" Subject: RE: RV10-List: Emailing: IMG_0927, IMG_0932, IMG_0935, IMG_0938 I take it is a relatively short trip to the airport. Now the fun begins, the system checkouts. Good luck. Gary 40274 -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of David McNeill Sent: Sunday, December 30, 2007 12:44 PM Subject: RV10-List: Emailing: IMG_0927, IMG_0932, IMG_0935, IMG_0938 Another milestone this morning. The trip to the airport was about 2 miles at 0600 on city streets. All the other parts are ready at the hangaar. Hopefully March. Your message is ready to be sent with the following file or link attachments: IMG_0927 IMG_0932 IMG_0935 IMG_0938 ________________________________ Message 3 _____________________________________ Time: 10:28:45 AM PST US From: "Carl Froehlich" Subject: RE: RV10-List: Emailing: IMG_0927, IMG_0932, IMG_0935, IMG_0938 Nice tow bar. Where did you get it? Carl Froehlich RV-8A (375 hrs) RV-10 (wings) -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of David McNeill Sent: Sunday, December 30, 2007 12:44 PM Subject: RV10-List: Emailing: IMG_0927, IMG_0932, IMG_0935, IMG_0938 Another milestone this morning. The trip to the airport was about 2 miles at 0600 on city streets. All the other parts are ready at the hangaar. Hopefully March. Your message is ready to be sent with the following file or link attachments: IMG_0927 IMG_0932 IMG_0935 IMG_0938 ________________________________ Message 4 _____________________________________ Time: 10:44:13 AM PST US From: "David McNeill" Subject: RE: RV10-List: Emailing: IMG_0927, IMG_0932, IMG_0935, IMG_0938 made it. threaded rod from McMaster Carr that was machined to catch the cap screws. -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Carl Froehlich Sent: Sunday, December 30, 2007 11:25 AM Subject: RE: RV10-List: Emailing: IMG_0927, IMG_0932, IMG_0935, IMG_0938 --> Nice tow bar. Where did you get it? Carl Froehlich RV-8A (375 hrs) RV-10 (wings) -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of David McNeill Sent: Sunday, December 30, 2007 12:44 PM Subject: RV10-List: Emailing: IMG_0927, IMG_0932, IMG_0935, IMG_0938 Another milestone this morning. The trip to the airport was about 2 miles at 0600 on city streets. All the other parts are ready at the hangaar. Hopefully March. Your message is ready to be sent with the following file or link attachments: IMG_0927 IMG_0932 IMG_0935 IMG_0938 ________________________________ Message 5 _____________________________________ Time: 11:26:24 AM PST US From: MauleDriver Subject: RV10-List: Static line and ADAHRS connection - where do you make it? I'm putting the static line in from the rear ports forward to the panel. Do I need a 3 way fitting or something back in the battery area to feed the ADAHRS box for a Chelton or other EFIS? Just looking for a quick yes or no before I close up the RH baggage wall and the static line. ________________________________ Message 6 _____________________________________ Time: 01:02:01 PM PST US Subject: RV10-List: Wayne's interior From: "Dawson-Townsend,Timothy" Wayne: Why don't you send some of your interior photos to Tim Olson and we can have him post them on his site for all to enjoy . . . TDT 40025 Tim Dawson-Townsend tdt@aurora.aero 617-500-4812 (office) 617-905-4800 (mobile) ________________________________ Message 7 _____________________________________ Time: 01:29:10 PM PST US From: Larry Rosen Subject: Re: RV10-List: Static line and ADAHRS connection - where do you make it? The Cheltons have a MSU and a GADAHRS in addition to the screens. The MSU only gets wires. The GADAHRS gets wires and Pitot and Static connections. Tim has both units mounted in the rear. I am only mounting the MSU in the back, the GADAHRS will be behind the panel. Larry MauleDriver wrote: > > I'm putting the static line in from the rear ports forward to the > panel. Do I need a 3 way fitting or something back in the battery > area to feed the ADAHRS box for a Chelton or other EFIS? > Just looking for a quick yes or no before I close up the RH baggage > wall and the static line. > > ________________________________ Message 8 _____________________________________ Time: 01:40:42 PM PST US From: "John Testement" Subject: RE: RV10-List: Static line and ADAHRS connection - where do you make it? Yes, The Chelton GDHARS requires both pitot and static lines. The Quick Connect fittings (from SafeAir) are really easy to work with. John Testement jwt@roadmapscoaching.com 40321 Richmond, VA Paint prep, interior, and LOTS of little stuff do not archive -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of MauleDriver Sent: Sunday, December 30, 2007 2:21 PM Subject: RV10-List: Static line and ADAHRS connection - where do you make it? I'm putting the static line in from the rear ports forward to the panel. Do I need a 3 way fitting or something back in the battery area to feed the ADAHRS box for a Chelton or other EFIS? Just looking for a quick yes or no before I close up the RH baggage wall and the static line. 11:27 AM 11:27 AM ________________________________ Message 9 _____________________________________ Time: 04:01:52 PM PST US From: Tim Olson Subject: Re: RV10-List: Static line and ADAHRS connection - where do you make it? Depends on the line that you're using as to what to do, but for me, using tygon, it was easy to just splice in a push-on "T" when I upgraded to the pinpoint. You'll want Pitot and Static to wherever you mount the AHRS. I also "T'd" my pitot where it comes into the fuse and ran one back. Tim Olson - RV-10 N104CD - Flying do not archive MauleDriver wrote: > > I'm putting the static line in from the rear ports forward to the > panel. Do I need a 3 way fitting or something back in the battery area > to feed the ADAHRS box for a Chelton or other EFIS? > Just looking for a quick yes or no before I close up the RH baggage wall > and the static line. > > ________________________________ Message 10 ____________________________________ Time: 07:44:03 PM PST US Subject: RV10-List: Need wiring diagram for aileron trim From: "johngoodman" Hate to bug everybody but I installed the electric aileron trim and suddenly realized I don't have a wiring diagram. Anybody have one or at least know which wire is which? It's the standard Ray Allen trim servo from Vans. John -------- #40572 QB Wings, QB Fuse arrived N711JG reserved Read this topic online here: http://forums.matronics.com/viewtopic.php?p=155105#155105 ________________________________ Message 11 ____________________________________ Time: 07:53:40 PM PST US From: "Rene" Subject: RE: RV10-List: Need wiring diagram for aileron trim What are you hooking it up to? Ray Allen indicator, GRT EFIS, etc. Rene' 801-721-6080 -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of johngoodman Sent: Sunday, December 30, 2007 8:41 PM Subject: RV10-List: Need wiring diagram for aileron trim Hate to bug everybody but I installed the electric aileron trim and suddenly realized I don't have a wiring diagram. Anybody have one or at least know which wire is which? It's the standard Ray Allen trim servo from Vans. John -------- #40572 QB Wings, QB Fuse arrived N711JG reserved Read this topic online here: http://forums.matronics.com/viewtopic.php?p=155105#155105 ________________________________ Message 12 ____________________________________ Time: 08:00:49 PM PST US From: "Rene" Subject: RE: RV10-List: Need wiring diagram for aileron trim Here is a link to the Ray Allen page with their wiring diagrams. http://www.rayallencompany.com/RACinfo/downloadpg.html Rene' 801-721-6080 -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of johngoodman Sent: Sunday, December 30, 2007 8:41 PM Subject: RV10-List: Need wiring diagram for aileron trim Hate to bug everybody but I installed the electric aileron trim and suddenly realized I don't have a wiring diagram. Anybody have one or at least know which wire is which? It's the standard Ray Allen trim servo from Vans. John -------- #40572 QB Wings, QB Fuse arrived N711JG reserved Read this topic online here: http://forums.matronics.com/viewtopic.php?p=155105#155105 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.