---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sat 02/09/08: 14 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:32 AM - Re: AA Overhead console retrofitting (Michael Wellenzohn) 2. 03:15 AM - Re: magnetometer location (Russell Daves) 3. 08:08 AM - Re: Peel ply left on the cabin top NOT - fitting the cabin top (Ben Westfall) 4. 08:53 AM - Aircrafter's Seminar Pictures (Bob Leffler) 5. 10:21 AM - Re: tungsten carbide grit (Jae Chang) 6. 11:34 AM - Re: Aircrafter's Seminar Pictures (Ben Westfall) 7. 11:37 AM - Re: Aircrafter's Seminar Pictures (Ben Westfall) 8. 12:33 PM - Re: Re: tungsten carbide grit (William Curtis) 9. 02:07 PM - Re: Aircrafter's Seminar Pictures (Dsyvert@aol.com) 10. 02:53 PM - Re: Ignition Switch Drawing (Sam Marlow) 11. 04:04 PM - Wisconsin Visit (Jeff Carpenter) 12. 07:02 PM - Hey guy's THANKS for the Ride! (Deems Davis) 13. 07:35 PM - Re: Hey guy's THANKS for the Ride! (Deems Davis) 14. 09:28 PM - Re: Wisconsin Visit (Dave Leikam) ________________________________ Message 1 _____________________________________ Time: 01:32:08 AM PST US Subject: RV10-List: Re: AA Overhead console retrofitting From: "Michael Wellenzohn" Great Thanks Steve for the explanation. Michael -------- RV-10 builder (engine, prop, finishing) #511 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=163129#163129 ________________________________ Message 2 _____________________________________ Time: 03:15:12 AM PST US From: "Russell Daves" Subject: Re: RV10-List: magnetometer location No problem. Russ ________________________________ Message 3 _____________________________________ Time: 08:08:24 AM PST US From: "Ben Westfall" Subject: RE: RV10-List: Peel ply left on the cabin top NOT - fitting the cabin top Patrick thanks for the write up. Which body saw blades did you find worked best fine or coarse tooth? -Ben Westfall #40579 / N109LB -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Patrick ONeill Sent: Friday, February 08, 2008 1:24 PM Subject: RE: RV10-List: Peel ply left on the cabin top NOT - fitting the cabin top On mine, the scribe lines were very unreliable. The scribes on the cabin bottom flange under the rear windows varied from 1 1/8" to 7/8" (plans specify 3/4")and were extremely wavy with dual scribe lines overlapping and crossing when they started over. I re-marked according to dimensions in the plans. I did not finish the fitting yet, but the initial cuts were definitely too large to fit. The door jams weren't anywhere close to fitting to the fuselage. I've been waiting until I had enough time to carefully work on the fit. As for that magic mini Makita belt sander ( http://www.makita.com/menu.php?pg=product_det&tag=9031 ), when I got home from the Watsonville class I searched all the local places for one, but no one carried it. I ended up using a standard electric hand held Makita 3x18 belt sander which I already had: http://www.makita.com/menu.php?pg=product_det&tag=9910 (have lots of belts, they go quick, I found the more expensive blue belts last much much longer than the standard brown ones and would recommend them) That worked great. To get clean corners I used the die grinder sanding drum kit from Avery: http://www.averytools.com/pc-924-80-3m-rubber-expanding-sanding-drums-and-ba nds-kit.aspx For the actual cutting I used this saw from Harbor Freight: http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=91753 It worked great aside from running through blades quickly. I ran out but was able to find a blade pack at a local home depot that worked and was able to soldier on to completion: http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10 051&langId=-1&catalogId=10053&productId=100098704 That combination of tools worked perfectly for me. I'm glad I didn't spend the $250 on that mini-Makita. Best Regards, Patrick #40715 / N690CT ________________________________ Message 4 _____________________________________ Time: 08:53:11 AM PST US From: "Bob Leffler" Subject: RV10-List: Aircrafter's Seminar Pictures Ben, Patrick, Bill, David, Gary, et al...... If you took pictures at the Aircrafter's seminar, I would like to get a copy of your pictures. I can set up a ftp account to upload them. Thanks, bob __________ Information from ESET NOD32 Antivirus, version of virus signature database 2861 (20080209) __________ The message was checked by ESET NOD32 Antivirus. ________________________________ Message 5 _____________________________________ Time: 10:21:50 AM PST US From: Jae Chang Subject: RV10-List: Re: tungsten carbide grit I would *HIGHLY* recommend finding tungsten carbide blades. I ended up doing all my cuts using a jigsaw with these special tungsten carbide grit covered jig saw blades. I never found them at either lowes or home depot. i did find them at my local smaller ace hardware store for about $5, i think. they are good for almost any material. i bought 2, in case one breaks. also, i use one for a while and let it cool down while i use the other. i haven't noticed any wear at all. i can't find it on acehardware.com, hmmm. however, the one i used is similar to this link below. you can click on the image to enlarge it. mine has a thinner blade, to allow for tighter corners. http://www.tools-plus.com/milwaukee-48-42-0801.html Jae #40533 - pitot tube install taking forever Ben Westfall wrote: > > Patrick thanks for the write up. Which body saw blades did you find worked > best fine or coarse tooth? > > -Ben Westfall > #40579 / N109LB > > ________________________________ Message 6 _____________________________________ Time: 11:34:37 AM PST US From: "Ben Westfall" Subject: RE: RV10-List: Aircrafter's Seminar Pictures http://www.sinkrate.com/rv10/aerocrafters-fiberglass-class/ Here are all my pictures from the class. -Ben Westfall #40579 / N109LB -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bob Leffler Sent: Saturday, February 09, 2008 8:48 AM Subject: RV10-List: Aircrafter's Seminar Pictures Ben, Patrick, Bill, David, Gary, et al...... If you took pictures at the Aircrafter's seminar, I would like to get a copy of your pictures. I can set up a ftp account to upload them. Thanks, bob __________ Information from ESET NOD32 Antivirus, version of virus signature database 2861 (20080209) __________ The message was checked by ESET NOD32 Antivirus. ________________________________ Message 7 _____________________________________ Time: 11:37:58 AM PST US From: "Ben Westfall" Subject: RE: RV10-List: Aircrafter's Seminar Pictures Oops wrong url in the last email... http://www.sinkrate.com/rv10/aircrafters-fiberglass-class -Ben -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bob Leffler Sent: Saturday, February 09, 2008 8:48 AM Subject: RV10-List: Aircrafter's Seminar Pictures Ben, Patrick, Bill, David, Gary, et al...... If you took pictures at the Aircrafter's seminar, I would like to get a copy of your pictures. I can set up a ftp account to upload them. Thanks, bob __________ Information from ESET NOD32 Antivirus, version of virus signature database 2861 (20080209) __________ The message was checked by ESET NOD32 Antivirus. ________________________________ Message 8 _____________________________________ Time: 12:33:20 PM PST US Subject: re: RV10-List: Re: tungsten carbide grit From: "William Curtis" Yup, I used those and I did find them at Home Depot made by Bosch and also a no-name brand. I have a picture of the packages somewhere but I have not updated the web page in a while. Designed for wall tile and fiberglass. William http://wcurtis.nerv10.com/ "Be who you are and say what you feel because those who mind don't matter and those who matter don't mind." -- Dr. Suess -------- Original Message -------- > I would *HIGHLY* recommend finding tungsten carbide blades. I ended up doing all my cuts using a jigsaw with these special tungsten carbide grit covered jig saw blades. I never found them at either lowes or home depot. i did find them at my local smaller ace hardware store for about $5, i think. they are good for almost any material. i bought 2, in case one breaks. also, i use one for a while and let it cool down while i use the other. i haven't noticed any wear at all. i can't find it on acehardware.com, hmmm. however, the one i used is similar to this link below. you can click on the image to enlarge it. mine has a thinner blade, to allow for tighter corners. http://www.tools-plus.com/milwaukee-48-42-0801.html Jae #40533 - pitot tube install taking forever ________________________________ Message 9 _____________________________________ Time: 02:07:37 PM PST US From: Dsyvert@aol.com Subject: Re: RV10-List: Aircrafter's Seminar Pictures I have pictures so if anyone would like me to email, just email me. It may take a couple emails because it is about 5 meg. Dave Syvertson _dsyvert@aol.com_ (mailto:dsyvert@aol.com) do no archieve **************Biggest Grammy Award surprises of all time on AOL Music. (http://music.aol.com/grammys/pictures/never-won-a-grammy?NCID=aolcmp003000000025 48) ________________________________ Message 10 ____________________________________ Time: 02:53:28 PM PST US From: Sam Marlow Subject: Re: RV10-List: Ignition Switch Drawing ________________________________ Message 11 ____________________________________ Time: 04:04:39 PM PST US From: Jeff Carpenter Subject: RV10-List: Wisconsin Visit The family and I are heading out to Dellafield Wisconsin next week to see some friends. We'll be in town late Thursday through Monday morning. Weather permitting I'll take my 5 year old son up to the EAA Museum one of the days. Are there any 10 builders in the general area... Milwaukee, Dellafield, Oshkosh up for a visit? Jeff Carpenter South Pasadena, California 40304 Almost through the dreaded section 29 ________________________________ Message 12 ____________________________________ Time: 07:02:59 PM PST US From: Deems Davis Subject: RV10-List: Hey guy's THANKS for the Ride! Dean, & Bruce THANKS again for taking the time and for thinking of me. I REALLY enjoyed it. I put the photos from the trip up in an album on my web site here's the link :http://deemsrv10.com/album/Dean%20&%20Bruce's%20805HL%20in%20AZ/index.html Looking forward to OSH .08. Deems Davis # 406 'Its all done....Its just not put together' http://deemsrv10.com/ > * > > * ________________________________ Message 13 ____________________________________ Time: 07:35:50 PM PST US From: Deems Davis Subject: Re: RV10-List: Hey guy's THANKS for the Ride! Oooooppps, ! :-[ I thought I had sent this to Dean Somke's e-mail address, but obviously I was mistaken, Sorry if I've created any confusion (or envy) , but it was a BEAUTIFUL 72 degree day here in Arizona today, and the trip from Phoenix to Payson and the Mougillon Rim was Fanststic ! Do not archive Deems Deems Davis wrote: > > Dean, & Bruce > > THANKS again for taking the time and for thinking of me. I REALLY > enjoyed it. I put the photos from the trip up in an album on my web > site here's the link > :http://deemsrv10.com/album/Dean%20&%20Bruce's%20805HL%20in%20AZ/index.html > > Looking forward to OSH .08. > ________________________________ Message 14 ____________________________________ Time: 09:28:19 PM PST US From: "Dave Leikam" Subject: Re: RV10-List: Wisconsin Visit Jeff, Give me a call when you get in town. I live in Muskego and would love to show you my project if time permits. Muskego is about 20 min. form Delafield. Dave Leikam #40496 414-807-5499 cell do not archive ----- Original Message ----- From: "Jeff Carpenter" Sent: Saturday, February 09, 2008 5:58 PM Subject: RV10-List: Wisconsin Visit > > The family and I are heading out to Dellafield Wisconsin next week to see > some friends. We'll be in town late Thursday through Monday morning. > Weather permitting I'll take my 5 year old son up to the EAA Museum one > of the days. Are there any 10 builders in the general area... Milwaukee, > Dellafield, Oshkosh up for a visit? > > Jeff Carpenter > South Pasadena, California > 40304 > Almost through the dreaded section 29 > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.