Today's Message Index:
----------------------
1. 01:08 PM - HOUR TOTAL ON DOORS (John Gonzalez)
2. 05:17 PM - Re: HOUR TOTAL ON DOORS (Deems Davis)
3. 09:57 PM - Exhaust fitting problem (McGANN, Ron)
4. 10:17 PM - Re: Exhaust fitting problem (Robin Marks)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | HOUR TOTAL ON DOORS |
I started my door half triming on March 7th. Last weekend I painted the int
erior of the doors, meaning that I have not placed the door seals on yet, n
or have I put the windows on the doors either. So far I spend 69 hours on d
oor related issues. They fit like a gloove, but man it was a long haul.
John G. #409 on to Windows
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: HOUR TOTAL ON DOORS |
I'd say you got away easy! ;-)
Deems Davis # 406
'Its all done....Its just not put together'
http://deemsrv10.com/
John Gonzalez wrote:
> . They fit like a gloove, but man it was a long haul.
>
> John G. #409 on to Windows
> *
> *
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Exhaust fitting problem |
G'day all,
After 4.25 years of building and having everything fit beautifully, I
finally get to the very last set of plans (FF-6 Exhaust installation).
Install the right side first, still amazed at how everything 'just
fits'. Finished the routing of the alternator and starter wires and
pulled out the last piece of the kit that was left - the left hand
exhaust manifold.
There is no way that this puppy will fit. The riser for #2 cylinder
seems to have been welded incorrectly and there is nowhere near enough
adjustment to have the stack fit the exhaust ports.
Has anyone else experienced this or am I SOL, right at the finish line??
Thanks in advance for any responses - no 'cheers' today ;-<
Ron
187 hobbled at the end
"Warning:
The information contained in this email and any attached files is
confidential to BAE Systems Australia. If you are not the intended
recipient, any use, disclosure or copying of this email or any
attachments is expressly prohibited. If you have received this email
in error, please notify us immediately. VIRUS: Every care has been
taken to ensure this email and its attachments are virus free,
however, any loss or damage incurred in using this email is not the
sender's responsibility. It is your responsibility to ensure virus
checks are completed before installing any data sent in this email to
your computer."
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Exhaust fitting problem |
Ron,
Looks like you have two issues, one your exhaust does no
fit and two... you think you are at the finish line.
Just pulling your leg mate. Good luck,
Robin
Do Not Archive
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of McGANN, Ron
Sent: Tuesday, June 03, 2008 9:54 PM
Subject: RV10-List: Exhaust fitting problem
G'day all,
After 4.25 years of building and having everything fit beautifully, I
finally get to the very last set of plans (FF-6 Exhaust installation).
Install the right side first, still amazed at how everything 'just
fits'. Finished the routing of the alternator and starter wires and
pulled out the last piece of the kit that was left - the left hand
exhaust manifold.
There is no way that this puppy will fit. The riser for #2 cylinder
seems to have been welded incorrectly and there is nowhere near enough
adjustment to have the stack fit the exhaust ports.
Has anyone else experienced this or am I SOL, right at the finish line??
Thanks in advance for any responses - no 'cheers' today ;-<
Ron
187 hobbled at the end
"Warning:
The information contained in this email and any attached files is
confidential to BAE Systems Australia. If you are not the intended
recipient, any use, disclosure or copying of this email or any
attachments is expressly prohibited. If you have received this email
in error, please notify us immediately. VIRUS: Every care has been
taken to ensure this email and its attachments are virus free,
however, any loss or damage incurred in using this email is not the
sender's responsibility. It is your responsibility to ensure virus
checks are completed before installing any data sent in this email to
your computer."
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|