---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Tue 06/03/08: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:08 PM - HOUR TOTAL ON DOORS (John Gonzalez) 2. 05:17 PM - Re: HOUR TOTAL ON DOORS (Deems Davis) 3. 09:57 PM - Exhaust fitting problem (McGANN, Ron) 4. 10:17 PM - Re: Exhaust fitting problem (Robin Marks) ________________________________ Message 1 _____________________________________ Time: 01:08:18 PM PST US From: John Gonzalez Subject: RV10-List: HOUR TOTAL ON DOORS I started my door half triming on March 7th. Last weekend I painted the int erior of the doors, meaning that I have not placed the door seals on yet, n or have I put the windows on the doors either. So far I spend 69 hours on d oor related issues. They fit like a gloove, but man it was a long haul. John G. #409 on to Windows ________________________________ Message 2 _____________________________________ Time: 05:17:41 PM PST US From: Deems Davis Subject: Re: RV10-List: HOUR TOTAL ON DOORS I'd say you got away easy! ;-) Deems Davis # 406 'Its all done....Its just not put together' http://deemsrv10.com/ John Gonzalez wrote: > . They fit like a gloove, but man it was a long haul. > > John G. #409 on to Windows > * > * ________________________________ Message 3 _____________________________________ Time: 09:57:44 PM PST US Subject: RV10-List: Exhaust fitting problem From: "McGANN, Ron" G'day all, After 4.25 years of building and having everything fit beautifully, I finally get to the very last set of plans (FF-6 Exhaust installation). Install the right side first, still amazed at how everything 'just fits'. Finished the routing of the alternator and starter wires and pulled out the last piece of the kit that was left - the left hand exhaust manifold. There is no way that this puppy will fit. The riser for #2 cylinder seems to have been welded incorrectly and there is nowhere near enough adjustment to have the stack fit the exhaust ports. Has anyone else experienced this or am I SOL, right at the finish line?? Thanks in advance for any responses - no 'cheers' today ;-< Ron 187 hobbled at the end "Warning: The information contained in this email and any attached files is confidential to BAE Systems Australia. If you are not the intended recipient, any use, disclosure or copying of this email or any attachments is expressly prohibited. If you have received this email in error, please notify us immediately. VIRUS: Every care has been taken to ensure this email and its attachments are virus free, however, any loss or damage incurred in using this email is not the sender's responsibility. It is your responsibility to ensure virus checks are completed before installing any data sent in this email to your computer." ________________________________ Message 4 _____________________________________ Time: 10:17:30 PM PST US Subject: RE: RV10-List: Exhaust fitting problem From: "Robin Marks" Ron, Looks like you have two issues, one your exhaust does no fit and two... you think you are at the finish line. Just pulling your leg mate. Good luck, Robin Do Not Archive From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of McGANN, Ron Sent: Tuesday, June 03, 2008 9:54 PM Subject: RV10-List: Exhaust fitting problem G'day all, After 4.25 years of building and having everything fit beautifully, I finally get to the very last set of plans (FF-6 Exhaust installation). Install the right side first, still amazed at how everything 'just fits'. Finished the routing of the alternator and starter wires and pulled out the last piece of the kit that was left - the left hand exhaust manifold. There is no way that this puppy will fit. The riser for #2 cylinder seems to have been welded incorrectly and there is nowhere near enough adjustment to have the stack fit the exhaust ports. Has anyone else experienced this or am I SOL, right at the finish line?? Thanks in advance for any responses - no 'cheers' today ;-< Ron 187 hobbled at the end "Warning: The information contained in this email and any attached files is confidential to BAE Systems Australia. If you are not the intended recipient, any use, disclosure or copying of this email or any attachments is expressly prohibited. If you have received this email in error, please notify us immediately. VIRUS: Every care has been taken to ensure this email and its attachments are virus free, however, any loss or damage incurred in using this email is not the sender's responsibility. It is your responsibility to ensure virus checks are completed before installing any data sent in this email to your computer." ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.