Today's Message Index:
----------------------
1. 02:27 AM - Re: Alternate Static Air Valve (jayb)
2. 04:42 AM - Re: Replacement full safety locking INTERIOR door handles offered (Patrick Thyssen)
3. 05:00 AM - Re: Alternate Static Air Valve (Wayne Edgerton)
4. 05:36 AM - Re: Alternate Static Air Valve (David Maib)
5. 06:34 AM - Re: Replacement full safety locking INTERIOR door handles offered (RV Builder (Michael Sausen))
6. 08:08 AM - Re: Alternate Static Air Valve (Chris Johnston)
7. 08:23 AM - When to install door windows (orchidman)
8. 11:24 AM - Re: Alternate Static Air Valve (David McNeill)
9. 12:07 PM - Re: Alternate Static Air Valve (Dave Saylor)
10. 12:11 PM - Re: When to install door windows (Dave Saylor)
11. 12:33 PM - Re: Re: Rear Heat Duct (Scat Tube) - SOLUTION (Don McDonald)
12. 01:06 PM - Re: Alternate Static Air Valve (Dave Leikam)
13. 01:16 PM - Re: Mounting GRT AHRS & Magnetometer (William Curtis)
14. 01:52 PM - Harness and headset brackets (partner14)
15. 02:18 PM - Re: Harness and headset brackets (pascal)
16. 02:26 PM - Re: Alternate Static Air Valve (johngoodman)
17. 04:15 PM - Re: Harness and headset brackets (Don McDonald)
18. 04:35 PM - Re: Alternate Static Air Valve (Tim Olson)
19. 05:33 PM - Re: Harness and headset brackets (nukeflyboy)
20. 05:58 PM - Re: Replacement full safety locking INTERIOR door handles offered (Rick Sked)
21. 06:30 PM - Re: Alternate Static Air Valve (David Maib)
22. 06:34 PM - Re: Re: Harness and headset brackets (Don McDonald)
23. 07:10 PM - Re: Harness and headset brackets (pascal)
24. 08:45 PM - Re: fire extinguisher (greghale)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Alternate Static Air Valve |
Here's where I got them...
http://clippard.com/store/display_details.asp?sku=TV-2SP
Cheers,
Jay
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p 8347#208347
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Replacement full safety locking INTERIOR door handles offered |
Whats the price?
Pat Thyssen
--- On Sat, 10/11/08, Don McDonald <building_partner@yahoo.com> wrote:
From: Don McDonald <building_partner@yahoo.com>
Subject: Re: RV10-List: Replacement full safety locking INTERIOR door handl
es offered
I am interested.- What's Dave's email.
Don McDonald
--- On Sat, 10/11/08, RV Builder (Michael Sausen) <rvbuilder@sausen.net> wr
ote:
From: RV Builder (Michael Sausen) <rvbuilder@sausen.net>
Subject: RV10-List: Replacement full safety locking INTERIOR door handles o
ffered
- If anyone is interested Dave Nellis has been using my interior door han
dles to prototype machined replacements that have the same functionality bu
t are not as ugly.- I know he posted something on this a couple weeks ago
but it sounds like he didn=A2t really get any interest in it.- I hate to
see someone put this much work into these and have them go by the way side
.- I just can=A2t believe people are willing to spend $500 on exterior ha
ndles but are not interested in replacing the fugly interior handles.
-
- If you have ANY interest in these let Dave know!
-
Michael
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Alternate Static Air Valve |
David,
I installed a alternate static source that I got from Safeair1
http://www.safeair1.com/SA1_products/AirKits.htm They sell a complete
pitot static system that I think is quite good. This alternate air is
very simple to install, you just put a connector inline to your
pitot/static system with a pull cord to activate the alternate air. I
installed the alternate air under the panel just forward of my left
knee so I can just reach down and pull out the quick release plug if I
need to.
Wayne Edgerton #40336
flying N602WT
Time: 09:44:04 PM PST US
Subject: Alternate Static Air Valve
From: "dmaib@mac.com" <dmaib@mac.com>
A couple of years ago, I saw a mechanical switch/valve to control
alternate static
air in one of the forums. It was panel mounted. I cannot find
anything in
the archives about it. Does anyone happen to have information
about that valve?
--------
David Maib
RV-10 #40559
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Alternate Static Air Valve |
Thanks Sean!
David Maib
40559
do not archive
On Oct 12, 2008, at 1:51 AM, dogsbark@comcast.net wrote:
Dave,
I can't remember where to get it, but I believe it's made by Clippard.
Sean Blair
#40225
brows
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Replacement full safety locking INTERIOR door handles |
offered
Sorry, knew I was forgetting something. He is a member of this list but
his direct email is davidnellis691 at comcast.net. I'll post more pictures
and my impression of them as soon as I have them back.
Michael
From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@m
atronics.com] On Behalf Of Don McDonald
Sent: Saturday, October 11, 2008 10:57 AM
Subject: Re: RV10-List: Replacement full safety locking INTERIOR door handl
es offered
I am interested. What's Dave's email.
Don McDonald
--- On Sat, 10/11/08, RV Builder (Michael Sausen) <rvbuilder@sausen.net> wr
ote:
From: RV Builder (Michael Sausen) <rvbuilder@sausen.net>
Subject: RV10-List: Replacement full safety locking INTERIOR door handles o
ffered
If anyone is interested Dave Nellis has been using my interior door handl
es to prototype machined replacements that have the same functionality but
are not as ugly. I know he posted something on this a couple weeks ago but
it sounds like he didn=A2t really get any interest in it. I hate to see s
omeone put this much work into these and have them go by the way side. I j
ust can=A2t believe people are willing to spend $500 on exterior handles bu
t are not interested in replacing the fugly interior handles.
If you have ANY interest in these let Dave know!
Michael
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Alternate Static Air Valve |
I went through figuring out which one to get awhile back. there's some
information here:
http://tinyurl.com/4el5m3
cj
-----Original Message-----
From: owner-rv10-list-server@matronics.com on behalf of David Maib
Sent: Sun 10/12/2008 5:30 AM
Subject: Re: RV10-List: Alternate Static Air Valve
Thanks Sean!
David Maib
40559
do not archive
On Oct 12, 2008, at 1:51 AM, dogsbark@comcast.net wrote:
Dave,
I can't remember where to get it, but I believe it's made by Clippard.
Sean Blair
#40225
brows
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | When to install door windows |
Some time today, I should finish the second door installation. That is on the
hinges and trimmed to fit. Van's plans say to next install the windows. I would
like to hold off and complete the locking hardware before I install the windows.
I would like to hold off for several reasons, one being weight as the door will
be on and off many more times and also to minimize the possibility of scratching
them.
My question is, is there any valid reason against moving the installation of the
windows to after the door lock hardware is installed?
--------
Gary Blankenbiller
RV10 - # 40674
Instrument Panel, Fiberglass - SB
(N2GB registered)
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p 8371#208371
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Alternate Static Air Valve |
Curtiss valve is used. Check far left of panel and zoom in.
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of dmaib@mac.com
Sent: Saturday, October 11, 2008 9:43 PM
Subject: RV10-List: Alternate Static Air Valve
A couple of years ago, I saw a mechanical switch/valve to control alternate
static air in one of the forums. It was panel mounted. I cannot find
anything in the archives about it. Does anyone happen to have information
about that valve?
--------
David Maib
RV-10 #40559
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p 8341#208341
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Alternate Static Air Valve |
I used McMaster-Carr P/N 6791T13, for $11. It works great. It was in the
system for the static check to 20,000'--no leaks.
Dave Saylor
AirCrafters LLC
140 Aviation Way
Watsonville, CA
831-722-9141
831-750-0284 CL
www.AirCraftersLLC.com
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of dmaib@mac.com
Sent: Saturday, October 11, 2008 9:43 PM
Subject: RV10-List: Alternate Static Air Valve
A couple of years ago, I saw a mechanical switch/valve to control alternate
static air in one of the forums. It was panel mounted. I cannot find
anything in the archives about it. Does anyone happen to have information
about that valve?
--------
David Maib
RV-10 #40559
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p 8341#208341
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | When to install door windows |
Gary,
I don't see any reason you couldn't hold off until after the mechanisms are
installed. It shouldn't make any difference.
Dave Saylor
AirCrafters LLC
140 Aviation Way
Watsonville, CA
831-722-9141
831-750-0284 CL
www.AirCraftersLLC.com
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of orchidman
Sent: Sunday, October 12, 2008 8:23 AM
Subject: RV10-List: When to install door windows
Some time today, I should finish the second door installation. That is on
the hinges and trimmed to fit. Van's plans say to next install the windows.
I would like to hold off and complete the locking hardware before I install
the windows.
I would like to hold off for several reasons, one being weight as the door
will be on and off many more times and also to minimize the possibility of
scratching them.
My question is, is there any valid reason against moving the installation of
the windows to after the door lock hardware is installed?
--------
Gary Blankenbiller
RV10 - # 40674
Instrument Panel, Fiberglass - SB
(N2GB registered)
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p 8371#208371
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Rear Heat Duct (Scat Tube) - SOLUTION |
Cost is a good question.... just like the other brackets I offered up to al
l the guys building, the idea is to provide them, not make a living.- Bec
ause of the welding involved, at shop rate, and of course, depending on how
many we make, the cost could be $150 for one... but since that one would b
e mine, it would be free!!!- My brothers company has some of the best wel
ders in the country, and they have built many parts used by Lockeed, Aeroje
t, etc, even parts that have been to the moon.
Hopefully, we can keep the PRICE low enough to make it worthwhile for every
one.- Notice, I didn't say cost....
I'll try and get them to produce 20 of them and I'll guess and say the pric
e would then be below $50.
Will keep everyone informed.
Aluminum, will be the material.
Don-
--- On Fri, 10/10/08, Jesse Saint <jesse@saintaviation.com> wrote:
From: Jesse Saint <jesse@saintaviation.com>
Subject: Re: RV10-List: Re: Rear Heat Duct (Scat Tube) - SOLUTION
Do you have any idea of what it will cost. -I would definitely be interes
ted. -Will it be aluminum or stainless?
do not archive
Jesse Saint
Saint Aviation, Inc.
jesse@saintaviation.com
Cell: 352-427-0285
Fax: 815-377-3694
On Oct 10, 2008, at 11:43 AM, Don McDonald wrote:
OK Wayne, pictures it is.... when we get er done.- Unfortunetely, there's
no easy way to make this one.... welding necessary.- But I'll guarantee
that it'll look cool and work perfectly.
As an F1 pilot, thought you might like this photo of my project.- (scoop)
-
Don McDonald
#40636
Finishing the finishing
--- On-Fri, 10/10/08, Wayne Hadath-<whadath@rogers.com>-wrote:
From: Wayne Hadath <whadath@rogers.com>
Subject: RV10-List: Re: Rear Heat Duct (Scat Tube) - SOLUTION
To:-rv10-list@matronics.com
-Am interested too but would like to see pictures.
Wayne
F1 Rocket 290 hrs
SARL Racer 14
Checked by AVG.
08/10/2008 7:01 AM
<IMG_2263c.jpg>
=0A=0A=0A
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Alternate Static Air Valve |
I have this page bookmarked:
http://www.asapmachineryrepair.com/airvalves2.htm
Dave Leikam
RV-10 #40496
N89DA (Reserved)
Muskego, WI
----- Original Message -----
From: <dmaib@mac.com>
Sent: Saturday, October 11, 2008 11:43 PM
Subject: RV10-List: Alternate Static Air Valve
>
> A couple of years ago, I saw a mechanical switch/valve to control
> alternate static air in one of the forums. It was panel mounted. I cannot
> find anything in the archives about it. Does anyone happen to have
> information about that valve?
>
> --------
> David Maib
> RV-10 #40559
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p 8341#208341
>
>
>
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Mounting GRT AHRS & Magnetometer |
While I"m leaning toward AFS, when I was considering GRT, I built this AHRS "shelf"
just aft of the firewall.
http://nerv10.com/wcurtis/08fuselage/fuselage31f.html
http://nerv10.com/wcurtis/08fuselage/fuselage31q.html
Since the magnetometer is separate from the gyro, I didn't see the need to mount
it any further from the displays only to run a bunch of wires to that location
when there is ready space in this location.
GRT has the footprint for their AHRS on their website and I used it to pre install
plate-nuts in the mounting positions. If I don't go with GRT I can always
use it form something else.
http://www.grtavionics.com/File/Install%20Manuals/ahrs_b.pdf
William
http://nerv10.com/wcurtis/
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Harness and headset brackets |
If not too much trouble can all of you that ordered one or both of these send me
a quick email to let me know if you received them.
Thanks, Don McDonald
Scat rear heat solution in design. Anyone interested in axle extensions?
--------
Don A. McDonald
40636
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p 8414#208414
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Harness and headset brackets |
Don;
Received mine.
Thanks!
Pascal
--------------------------------------------------
From: "partner14" <building_partner@yahoo.com>
Sent: Sunday, October 12, 2008 1:51 PM
Subject: RV10-List: Harness and headset brackets
>
> If not too much trouble can all of you that ordered one or both of these
> send me a quick email to let me know if you received them.
> Thanks, Don McDonald
>
> Scat rear heat solution in design. Anyone interested in axle extensions?
>
> --------
> Don A. McDonald
> 40636
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p 8414#208414
>
>
>
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Alternate Static Air Valve |
David,
There is also a panel mounted switch that somebody bought from McMaster-Carr.
Look for part number 6791T12 for $14.15 (metal switch) or 6791T13 for $11.51
(plastic switch).
John
--------
#40572 QB Fuselage, wings finished
N711JG reserved
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p 8418#208418
Message 17
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Harness and headset brackets |
For God's sake, you know, that I know, that you received yours!--- (-
-;
--- On Sun, 10/12/08, pascal <pascal@rv10builder.net> wrote:
From: pascal <pascal@rv10builder.net>
Subject: Re: RV10-List: Harness and headset brackets
<pascal@rv10builder.net>
Don;
Received mine.
Thanks!
Pascal
--------------------------------------------------
From: "partner14" <building_partner@yahoo.com>
Sent: Sunday, October 12, 2008 1:51 PM
Subject: RV10-List: Harness and headset brackets
<building_partner@yahoo.com>
>
> If not too much trouble can all of you that ordered one or both of these
> send me a quick email to let me know if you received them.
> Thanks, Don McDonald
>
> Scat rear heat solution in design. Anyone interested in axle extensions?
>
> --------
> Don A. McDonald
> 40636
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p 8414#208414
>
>
>
=0A=0A=0A
Message 18
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Alternate Static Air Valve |
David,
I used something like these:
http://www.discoverysciences.com/product.aspx?id=2258
http://www.discoverysciences.com/uploadedFiles/Site_for_Catalog_2008/gc/GC_Accessories/Valves/valves.pdf
https://www.technical-controls.com/product.asp?prodid=3422
You can get them locally I'm sure. There are parker distributors
all over the place. I used to deal with a parker rep from the cities
for our company when I worked at Cray/SGI. All this stuff
is easy to get. I didn't put mine on the panel...I put it just below
the left side air vent on the side panel. That's where they located
it on my old beech. It's easy enough to get to for the almost
never occasion that you'll need it.
Tim Olson - RV-10 N104CD - Flying
do not archive
dmaib@mac.com wrote:
>
> A couple of years ago, I saw a mechanical switch/valve to control
> alternate static air in one of the forums. It was panel mounted. I
> cannot find anything in the archives about it. Does anyone happen to
> have information about that valve?
>
> -------- David Maib RV-10 #40559
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p 8341#208341
>
Message 19
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Harness and headset brackets |
Don,
I received both as requested. I haven't gotten to the installation yet but they
look good.
--------
Dave Moore
RV-6 flying
RV-10 QB - cabin top/fiberglass hell
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p 8444#208444
Message 20
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Replacement full safety locking INTERIOR door handles |
offered
Whatever it is Pat, you'd=C2- think it's too much...=C2-=C2- :)
Rick Sked
40185
do not archive
----- Original Message -----
From: "Patrick Thyssen" <jump2@sbcglobal.net>
Sent: Sunday, October 12, 2008 4:41:53 AM (GMT-0800) America/Los_Angeles
Subject: Re: RV10-List: Replacement full safety locking INTERIOR door handl
es offered
Whats the price?
Pat Thyssen
--- On Sat, 10/11/08, Don McDonald <building_partner@yahoo.com> wrote:
From: Don McDonald <building_partner@yahoo.com>
Subject: Re: RV10-List: Replacement full safety locking INTERIOR door handl
es offered
I am interested.=C2- What's Dave's email.
Don McDonald
--- On Sat, 10/11/08, RV Builder (Michael Sausen) <rvbuilder@sausen.net> wr
ote:
From: RV Builder (Michael Sausen) <rvbuilder@sausen.net>
Subject: RV10-List: Replacement full safety locking INTERIOR door handles o
ffered
=C2- If anyone is interested Dave Nellis has been using my interior door
handles to prototype machined replacements that have the same functionality
but are not as ugly.=C2- I know he posted something on this a couple wee
ks ago but it sounds like he didn=99t really get any interest in it.
=C2- I hate to see someone put this much work into these and have them go
by the way side.=C2- I just can=99t believe people are willing to
spend $500 on exterior handles but are not interested in replacing the fugl
y interior handles.
=C2- If you have ANY interest in these let Dave know!
Michael
get=_blank rel=nofollow>http://www.matronics.com/Navigator?RV10-List
=nofollow>http://forums.matronics.com blank rel=nofollow>http://www.mat
==================
====
=======================
===
Message 21
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Alternate Static Air Valve |
Thanks again to all for the alternate static source valve info. Lots
of good choices.
David Maib
40559
Finishing
do not archive
On Oct 12, 2008, at 6:32 PM, Tim Olson wrote:
David,
I used something like these:
http://www.discoverysciences.com/product.aspx?id=2258
http://www.discoverysciences.com/uploadedFiles/Site_for_Catalog_2008/
gc/GC_Accessories/Valves/valves.pdf
https://www.technical-controls.com/product.asp?prodid=3422
You can get them locally I'm sure. There are parker distributors
all over the place. I used to deal with a parker rep from the cities
for our company when I worked at Cray/SGI. All this stuff
is easy to get. I didn't put mine on the panel...I put it just below
the left side air vent on the side panel. That's where they located
it on my old beech. It's easy enough to get to for the almost
never occasion that you'll need it.
Tim Olson - RV-10 N104CD - Flying
do not archive
dmaib@mac.com wrote:
> A couple of years ago, I saw a mechanical switch/valve to control
> alternate static air in one of the forums. It was panel mounted. I
> cannot find anything in the archives about it. Does anyone happen to
> have information about that valve?
> -------- David Maib RV-10 #40559
> Read this topic online here:
> http://forums.matronics.com/viewtopic.php?p 8341#208341
Message 22
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Harness and headset brackets |
Thanks, just want to make sure everyone gets em'.
Don
--- On Sun, 10/12/08, nukeflyboy <flymoore@charter.net> wrote:
From: nukeflyboy <flymoore@charter.net>
Subject: RV10-List: Re: Harness and headset brackets
<flymoore@charter.net>
Don,
I received both as requested. I haven't gotten to the installation yet but
they look good.
--------
Dave Moore
RV-6 flying
RV-10 QB - cabin top/fiberglass hell
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p 8444#208444
Message 23
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Harness and headset brackets |
you asked I answered!
From: Don McDonald
Sent: Sunday, October 12, 2008 4:12 PM
Subject: Re: RV10-List: Harness and headset brackets
For God's sake, you know, that I know, that you received yours!
(--;
--- On Sun, 10/12/08, pascal <pascal@rv10builder.net> wrote:
From: pascal <pascal@rv10builder.net>
Subject: Re: RV10-List: Harness and headset brackets
To: rv10-list@matronics.com
Date: Sunday, October 12, 2008, 2:18 PM
<pascal@rv10builder.net>
Don;
Received mine.
Thanks!
Pascal
--------------------------------------------------
From: "partner14" <building_partner@yahoo.com>
Sent: Sunday, October 12, 2008 1:51 PM
Subject: RV10-List: Harness and headset brackets
<building_partner@yahoo.com>
>
> If not too much trouble can all of you that ordered one or both of
these
> send me a quick email to let me know if you received them.
> Thanks, Don McDonald
>
> Scat rear heat solution in design. Anyone interested in axle
extensions?
>
> --------
> Don A. McDonald
> 40636
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p 8414#208414
>
>
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
Message 24
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: fire extinguisher |
I will be mounting the fire extinguisher horizontally below the control stick.
There is enough room for a small extinguisher to be mounted in this location.
Greg...
--------
Greg Hale rv10 -- N210KH
www.nwacaptain.com
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p 8477#208477
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|