---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sun 10/12/08: 24 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:27 AM - Re: Alternate Static Air Valve (jayb) 2. 04:42 AM - Re: Replacement full safety locking INTERIOR door handles offered (Patrick Thyssen) 3. 05:00 AM - Re: Alternate Static Air Valve (Wayne Edgerton) 4. 05:36 AM - Re: Alternate Static Air Valve (David Maib) 5. 06:34 AM - Re: Replacement full safety locking INTERIOR door handles offered (RV Builder (Michael Sausen)) 6. 08:08 AM - Re: Alternate Static Air Valve (Chris Johnston) 7. 08:23 AM - When to install door windows (orchidman) 8. 11:24 AM - Re: Alternate Static Air Valve (David McNeill) 9. 12:07 PM - Re: Alternate Static Air Valve (Dave Saylor) 10. 12:11 PM - Re: When to install door windows (Dave Saylor) 11. 12:33 PM - Re: Re: Rear Heat Duct (Scat Tube) - SOLUTION (Don McDonald) 12. 01:06 PM - Re: Alternate Static Air Valve (Dave Leikam) 13. 01:16 PM - Re: Mounting GRT AHRS & Magnetometer (William Curtis) 14. 01:52 PM - Harness and headset brackets (partner14) 15. 02:18 PM - Re: Harness and headset brackets (pascal) 16. 02:26 PM - Re: Alternate Static Air Valve (johngoodman) 17. 04:15 PM - Re: Harness and headset brackets (Don McDonald) 18. 04:35 PM - Re: Alternate Static Air Valve (Tim Olson) 19. 05:33 PM - Re: Harness and headset brackets (nukeflyboy) 20. 05:58 PM - Re: Replacement full safety locking INTERIOR door handles offered (Rick Sked) 21. 06:30 PM - Re: Alternate Static Air Valve (David Maib) 22. 06:34 PM - Re: Re: Harness and headset brackets (Don McDonald) 23. 07:10 PM - Re: Harness and headset brackets (pascal) 24. 08:45 PM - Re: fire extinguisher (greghale) ________________________________ Message 1 _____________________________________ Time: 02:27:44 AM PST US Subject: RV10-List: Re: Alternate Static Air Valve From: "jayb" Here's where I got them... http://clippard.com/store/display_details.asp?sku=TV-2SP Cheers, Jay Read this topic online here: http://forums.matronics.com/viewtopic.php?p 8347#208347 ________________________________ Message 2 _____________________________________ Time: 04:42:53 AM PST US From: Patrick Thyssen Subject: Re: RV10-List: Replacement full safety locking INTERIOR door handles offered Whats the price? Pat Thyssen --- On Sat, 10/11/08, Don McDonald wrote: From: Don McDonald Subject: Re: RV10-List: Replacement full safety locking INTERIOR door handl es offered I am interested.- What's Dave's email. Don McDonald --- On Sat, 10/11/08, RV Builder (Michael Sausen) wr ote: From: RV Builder (Michael Sausen) Subject: RV10-List: Replacement full safety locking INTERIOR door handles o ffered - If anyone is interested Dave Nellis has been using my interior door han dles to prototype machined replacements that have the same functionality bu t are not as ugly.- I know he posted something on this a couple weeks ago but it sounds like he didn=A2t really get any interest in it.- I hate to see someone put this much work into these and have them go by the way side .- I just can=A2t believe people are willing to spend $500 on exterior ha ndles but are not interested in replacing the fugly interior handles. - - If you have ANY interest in these let Dave know! - Michael ________________________________ Message 3 _____________________________________ Time: 05:00:51 AM PST US From: "Wayne Edgerton" Subject: Re: RV10-List: Alternate Static Air Valve David, I installed a alternate static source that I got from Safeair1 http://www.safeair1.com/SA1_products/AirKits.htm They sell a complete pitot static system that I think is quite good. This alternate air is very simple to install, you just put a connector inline to your pitot/static system with a pull cord to activate the alternate air. I installed the alternate air under the panel just forward of my left knee so I can just reach down and pull out the quick release plug if I need to. Wayne Edgerton #40336 flying N602WT Time: 09:44:04 PM PST US Subject: Alternate Static Air Valve From: "dmaib@mac.com" A couple of years ago, I saw a mechanical switch/valve to control alternate static air in one of the forums. It was panel mounted. I cannot find anything in the archives about it. Does anyone happen to have information about that valve? -------- David Maib RV-10 #40559 ________________________________ Message 4 _____________________________________ Time: 05:36:27 AM PST US From: David Maib Subject: Re: RV10-List: Alternate Static Air Valve Thanks Sean! David Maib 40559 do not archive On Oct 12, 2008, at 1:51 AM, dogsbark@comcast.net wrote: Dave, I can't remember where to get it, but I believe it's made by Clippard. Sean Blair #40225 brows ________________________________ Message 5 _____________________________________ Time: 06:34:43 AM PST US From: "RV Builder (Michael Sausen)" Subject: RE: RV10-List: Replacement full safety locking INTERIOR door handles offered Sorry, knew I was forgetting something. He is a member of this list but his direct email is davidnellis691 at comcast.net. I'll post more pictures and my impression of them as soon as I have them back. Michael From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@m atronics.com] On Behalf Of Don McDonald Sent: Saturday, October 11, 2008 10:57 AM Subject: Re: RV10-List: Replacement full safety locking INTERIOR door handl es offered I am interested. What's Dave's email. Don McDonald --- On Sat, 10/11/08, RV Builder (Michael Sausen) wr ote: From: RV Builder (Michael Sausen) Subject: RV10-List: Replacement full safety locking INTERIOR door handles o ffered If anyone is interested Dave Nellis has been using my interior door handl es to prototype machined replacements that have the same functionality but are not as ugly. I know he posted something on this a couple weeks ago but it sounds like he didn=A2t really get any interest in it. I hate to see s omeone put this much work into these and have them go by the way side. I j ust can=A2t believe people are willing to spend $500 on exterior handles bu t are not interested in replacing the fugly interior handles. If you have ANY interest in these let Dave know! Michael ________________________________ Message 6 _____________________________________ Time: 08:08:47 AM PST US Subject: RE: RV10-List: Alternate Static Air Valve From: "Chris Johnston" I went through figuring out which one to get awhile back. there's some information here: http://tinyurl.com/4el5m3 cj -----Original Message----- From: owner-rv10-list-server@matronics.com on behalf of David Maib Sent: Sun 10/12/2008 5:30 AM Subject: Re: RV10-List: Alternate Static Air Valve Thanks Sean! David Maib 40559 do not archive On Oct 12, 2008, at 1:51 AM, dogsbark@comcast.net wrote: Dave, I can't remember where to get it, but I believe it's made by Clippard. Sean Blair #40225 brows ________________________________ Message 7 _____________________________________ Time: 08:23:42 AM PST US Subject: RV10-List: When to install door windows From: "orchidman" Some time today, I should finish the second door installation. That is on the hinges and trimmed to fit. Van's plans say to next install the windows. I would like to hold off and complete the locking hardware before I install the windows. I would like to hold off for several reasons, one being weight as the door will be on and off many more times and also to minimize the possibility of scratching them. My question is, is there any valid reason against moving the installation of the windows to after the door lock hardware is installed? -------- Gary Blankenbiller RV10 - # 40674 Instrument Panel, Fiberglass - SB (N2GB registered) Read this topic online here: http://forums.matronics.com/viewtopic.php?p 8371#208371 ________________________________ Message 8 _____________________________________ Time: 11:24:58 AM PST US From: "David McNeill" Subject: RE: RV10-List: Alternate Static Air Valve Curtiss valve is used. Check far left of panel and zoom in. -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of dmaib@mac.com Sent: Saturday, October 11, 2008 9:43 PM Subject: RV10-List: Alternate Static Air Valve A couple of years ago, I saw a mechanical switch/valve to control alternate static air in one of the forums. It was panel mounted. I cannot find anything in the archives about it. Does anyone happen to have information about that valve? -------- David Maib RV-10 #40559 Read this topic online here: http://forums.matronics.com/viewtopic.php?p 8341#208341 ________________________________ Message 9 _____________________________________ Time: 12:07:16 PM PST US From: "Dave Saylor" Subject: RE: RV10-List: Alternate Static Air Valve I used McMaster-Carr P/N 6791T13, for $11. It works great. It was in the system for the static check to 20,000'--no leaks. Dave Saylor AirCrafters LLC 140 Aviation Way Watsonville, CA 831-722-9141 831-750-0284 CL www.AirCraftersLLC.com -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of dmaib@mac.com Sent: Saturday, October 11, 2008 9:43 PM Subject: RV10-List: Alternate Static Air Valve A couple of years ago, I saw a mechanical switch/valve to control alternate static air in one of the forums. It was panel mounted. I cannot find anything in the archives about it. Does anyone happen to have information about that valve? -------- David Maib RV-10 #40559 Read this topic online here: http://forums.matronics.com/viewtopic.php?p 8341#208341 ________________________________ Message 10 ____________________________________ Time: 12:11:20 PM PST US From: "Dave Saylor" Subject: RE: RV10-List: When to install door windows Gary, I don't see any reason you couldn't hold off until after the mechanisms are installed. It shouldn't make any difference. Dave Saylor AirCrafters LLC 140 Aviation Way Watsonville, CA 831-722-9141 831-750-0284 CL www.AirCraftersLLC.com -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of orchidman Sent: Sunday, October 12, 2008 8:23 AM Subject: RV10-List: When to install door windows Some time today, I should finish the second door installation. That is on the hinges and trimmed to fit. Van's plans say to next install the windows. I would like to hold off and complete the locking hardware before I install the windows. I would like to hold off for several reasons, one being weight as the door will be on and off many more times and also to minimize the possibility of scratching them. My question is, is there any valid reason against moving the installation of the windows to after the door lock hardware is installed? -------- Gary Blankenbiller RV10 - # 40674 Instrument Panel, Fiberglass - SB (N2GB registered) Read this topic online here: http://forums.matronics.com/viewtopic.php?p 8371#208371 ________________________________ Message 11 ____________________________________ Time: 12:33:07 PM PST US From: Don McDonald Subject: Re: RV10-List: Re: Rear Heat Duct (Scat Tube) - SOLUTION Cost is a good question.... just like the other brackets I offered up to al l the guys building, the idea is to provide them, not make a living.- Bec ause of the welding involved, at shop rate, and of course, depending on how many we make, the cost could be $150 for one... but since that one would b e mine, it would be free!!!- My brothers company has some of the best wel ders in the country, and they have built many parts used by Lockeed, Aeroje t, etc, even parts that have been to the moon. Hopefully, we can keep the PRICE low enough to make it worthwhile for every one.- Notice, I didn't say cost.... I'll try and get them to produce 20 of them and I'll guess and say the pric e would then be below $50. Will keep everyone informed. Aluminum, will be the material. Don- --- On Fri, 10/10/08, Jesse Saint wrote: From: Jesse Saint Subject: Re: RV10-List: Re: Rear Heat Duct (Scat Tube) - SOLUTION Do you have any idea of what it will cost. -I would definitely be interes ted. -Will it be aluminum or stainless? do not archive Jesse Saint Saint Aviation, Inc. jesse@saintaviation.com Cell: 352-427-0285 Fax: 815-377-3694 On Oct 10, 2008, at 11:43 AM, Don McDonald wrote: OK Wayne, pictures it is.... when we get er done.- Unfortunetely, there's no easy way to make this one.... welding necessary.- But I'll guarantee that it'll look cool and work perfectly. As an F1 pilot, thought you might like this photo of my project.- (scoop) - Don McDonald #40636 Finishing the finishing --- On-Fri, 10/10/08, Wayne Hadath--wrote: From: Wayne Hadath Subject: RV10-List: Re: Rear Heat Duct (Scat Tube) - SOLUTION To:-rv10-list@matronics.com -Am interested too but would like to see pictures. Wayne F1 Rocket 290 hrs SARL Racer 14 Checked by AVG. 08/10/2008 7:01 AM =0A=0A=0A ________________________________ Message 12 ____________________________________ Time: 01:06:04 PM PST US From: "Dave Leikam" Subject: Re: RV10-List: Alternate Static Air Valve I have this page bookmarked: http://www.asapmachineryrepair.com/airvalves2.htm Dave Leikam RV-10 #40496 N89DA (Reserved) Muskego, WI ----- Original Message ----- From: Sent: Saturday, October 11, 2008 11:43 PM Subject: RV10-List: Alternate Static Air Valve > > A couple of years ago, I saw a mechanical switch/valve to control > alternate static air in one of the forums. It was panel mounted. I cannot > find anything in the archives about it. Does anyone happen to have > information about that valve? > > -------- > David Maib > RV-10 #40559 > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p 8341#208341 > > > ________________________________ Message 13 ____________________________________ Time: 01:16:29 PM PST US Subject: RE: RV10-List: Mounting GRT AHRS & Magnetometer From: "William Curtis" While I"m leaning toward AFS, when I was considering GRT, I built this AHRS "shelf" just aft of the firewall. http://nerv10.com/wcurtis/08fuselage/fuselage31f.html http://nerv10.com/wcurtis/08fuselage/fuselage31q.html Since the magnetometer is separate from the gyro, I didn't see the need to mount it any further from the displays only to run a bunch of wires to that location when there is ready space in this location. GRT has the footprint for their AHRS on their website and I used it to pre install plate-nuts in the mounting positions. If I don't go with GRT I can always use it form something else. http://www.grtavionics.com/File/Install%20Manuals/ahrs_b.pdf William http://nerv10.com/wcurtis/ ________________________________ Message 14 ____________________________________ Time: 01:52:25 PM PST US Subject: RV10-List: Harness and headset brackets From: "partner14" If not too much trouble can all of you that ordered one or both of these send me a quick email to let me know if you received them. Thanks, Don McDonald Scat rear heat solution in design. Anyone interested in axle extensions? -------- Don A. McDonald 40636 Read this topic online here: http://forums.matronics.com/viewtopic.php?p 8414#208414 ________________________________ Message 15 ____________________________________ Time: 02:18:48 PM PST US From: "pascal" Subject: Re: RV10-List: Harness and headset brackets Don; Received mine. Thanks! Pascal -------------------------------------------------- From: "partner14" Sent: Sunday, October 12, 2008 1:51 PM Subject: RV10-List: Harness and headset brackets > > If not too much trouble can all of you that ordered one or both of these > send me a quick email to let me know if you received them. > Thanks, Don McDonald > > Scat rear heat solution in design. Anyone interested in axle extensions? > > -------- > Don A. McDonald > 40636 > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p 8414#208414 > > > ________________________________ Message 16 ____________________________________ Time: 02:26:08 PM PST US Subject: RV10-List: Re: Alternate Static Air Valve From: "johngoodman" David, There is also a panel mounted switch that somebody bought from McMaster-Carr. Look for part number 6791T12 for $14.15 (metal switch) or 6791T13 for $11.51 (plastic switch). John -------- #40572 QB Fuselage, wings finished N711JG reserved Read this topic online here: http://forums.matronics.com/viewtopic.php?p 8418#208418 ________________________________ Message 17 ____________________________________ Time: 04:15:52 PM PST US From: Don McDonald Subject: Re: RV10-List: Harness and headset brackets For God's sake, you know, that I know, that you received yours!--- (- -; --- On Sun, 10/12/08, pascal wrote: From: pascal Subject: Re: RV10-List: Harness and headset brackets Don; Received mine. Thanks! Pascal -------------------------------------------------- From: "partner14" Sent: Sunday, October 12, 2008 1:51 PM Subject: RV10-List: Harness and headset brackets > > If not too much trouble can all of you that ordered one or both of these > send me a quick email to let me know if you received them. > Thanks, Don McDonald > > Scat rear heat solution in design. Anyone interested in axle extensions? > > -------- > Don A. McDonald > 40636 > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p 8414#208414 > > > =0A=0A=0A ________________________________ Message 18 ____________________________________ Time: 04:35:06 PM PST US From: Tim Olson Subject: Re: RV10-List: Alternate Static Air Valve David, I used something like these: http://www.discoverysciences.com/product.aspx?id=2258 http://www.discoverysciences.com/uploadedFiles/Site_for_Catalog_2008/gc/GC_Accessories/Valves/valves.pdf https://www.technical-controls.com/product.asp?prodid=3422 You can get them locally I'm sure. There are parker distributors all over the place. I used to deal with a parker rep from the cities for our company when I worked at Cray/SGI. All this stuff is easy to get. I didn't put mine on the panel...I put it just below the left side air vent on the side panel. That's where they located it on my old beech. It's easy enough to get to for the almost never occasion that you'll need it. Tim Olson - RV-10 N104CD - Flying do not archive dmaib@mac.com wrote: > > A couple of years ago, I saw a mechanical switch/valve to control > alternate static air in one of the forums. It was panel mounted. I > cannot find anything in the archives about it. Does anyone happen to > have information about that valve? > > -------- David Maib RV-10 #40559 > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p 8341#208341 > ________________________________ Message 19 ____________________________________ Time: 05:33:11 PM PST US Subject: RV10-List: Re: Harness and headset brackets From: "nukeflyboy" Don, I received both as requested. I haven't gotten to the installation yet but they look good. -------- Dave Moore RV-6 flying RV-10 QB - cabin top/fiberglass hell Read this topic online here: http://forums.matronics.com/viewtopic.php?p 8444#208444 ________________________________ Message 20 ____________________________________ Time: 05:58:55 PM PST US From: Rick Sked Subject: Re: RV10-List: Replacement full safety locking INTERIOR door handles offered Whatever it is Pat, you'd=C2- think it's too much...=C2-=C2- :) Rick Sked 40185 do not archive ----- Original Message ----- From: "Patrick Thyssen" Sent: Sunday, October 12, 2008 4:41:53 AM (GMT-0800) America/Los_Angeles Subject: Re: RV10-List: Replacement full safety locking INTERIOR door handl es offered Whats the price? Pat Thyssen --- On Sat, 10/11/08, Don McDonald wrote: From: Don McDonald Subject: Re: RV10-List: Replacement full safety locking INTERIOR door handl es offered I am interested.=C2- What's Dave's email. Don McDonald --- On Sat, 10/11/08, RV Builder (Michael Sausen) wr ote: From: RV Builder (Michael Sausen) Subject: RV10-List: Replacement full safety locking INTERIOR door handles o ffered =C2- If anyone is interested Dave Nellis has been using my interior door handles to prototype machined replacements that have the same functionality but are not as ugly.=C2- I know he posted something on this a couple wee ks ago but it sounds like he didn=99t really get any interest in it. =C2- I hate to see someone put this much work into these and have them go by the way side.=C2- I just can=99t believe people are willing to spend $500 on exterior handles but are not interested in replacing the fugl y interior handles. =C2- If you have ANY interest in these let Dave know! Michael get=_blank rel=nofollow>http://www.matronics.com/Navigator?RV10-List =nofollow>http://forums.matronics.com blank rel=nofollow>http://www.mat ================== ==== ======================= === ________________________________ Message 21 ____________________________________ Time: 06:30:52 PM PST US From: David Maib Subject: Re: RV10-List: Alternate Static Air Valve Thanks again to all for the alternate static source valve info. Lots of good choices. David Maib 40559 Finishing do not archive On Oct 12, 2008, at 6:32 PM, Tim Olson wrote: David, I used something like these: http://www.discoverysciences.com/product.aspx?id=2258 http://www.discoverysciences.com/uploadedFiles/Site_for_Catalog_2008/ gc/GC_Accessories/Valves/valves.pdf https://www.technical-controls.com/product.asp?prodid=3422 You can get them locally I'm sure. There are parker distributors all over the place. I used to deal with a parker rep from the cities for our company when I worked at Cray/SGI. All this stuff is easy to get. I didn't put mine on the panel...I put it just below the left side air vent on the side panel. That's where they located it on my old beech. It's easy enough to get to for the almost never occasion that you'll need it. Tim Olson - RV-10 N104CD - Flying do not archive dmaib@mac.com wrote: > A couple of years ago, I saw a mechanical switch/valve to control > alternate static air in one of the forums. It was panel mounted. I > cannot find anything in the archives about it. Does anyone happen to > have information about that valve? > -------- David Maib RV-10 #40559 > Read this topic online here: > http://forums.matronics.com/viewtopic.php?p 8341#208341 ________________________________ Message 22 ____________________________________ Time: 06:34:31 PM PST US From: Don McDonald Subject: Re: RV10-List: Re: Harness and headset brackets Thanks, just want to make sure everyone gets em'. Don --- On Sun, 10/12/08, nukeflyboy wrote: From: nukeflyboy Subject: RV10-List: Re: Harness and headset brackets Don, I received both as requested. I haven't gotten to the installation yet but they look good. -------- Dave Moore RV-6 flying RV-10 QB - cabin top/fiberglass hell Read this topic online here: http://forums.matronics.com/viewtopic.php?p 8444#208444 ________________________________ Message 23 ____________________________________ Time: 07:10:23 PM PST US From: "pascal" Subject: Re: RV10-List: Harness and headset brackets you asked I answered! From: Don McDonald Sent: Sunday, October 12, 2008 4:12 PM Subject: Re: RV10-List: Harness and headset brackets For God's sake, you know, that I know, that you received yours! (--; --- On Sun, 10/12/08, pascal wrote: From: pascal Subject: Re: RV10-List: Harness and headset brackets To: rv10-list@matronics.com Date: Sunday, October 12, 2008, 2:18 PM Don; Received mine. Thanks! Pascal -------------------------------------------------- From: "partner14" Sent: Sunday, October 12, 2008 1:51 PM Subject: RV10-List: Harness and headset brackets > > If not too much trouble can all of you that ordered one or both of these > send me a quick email to let me know if you received them. > Thanks, Don McDonald > > Scat rear heat solution in design. Anyone interested in axle extensions? > > -------- > Don A. McDonald > 40636 > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p 8414#208414 > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D ________________________________ Message 24 ____________________________________ Time: 08:45:14 PM PST US Subject: RV10-List: Re: fire extinguisher From: "greghale" I will be mounting the fire extinguisher horizontally below the control stick. There is enough room for a small extinguisher to be mounted in this location. Greg... -------- Greg Hale rv10 -- N210KH www.nwacaptain.com Read this topic online here: http://forums.matronics.com/viewtopic.php?p 8477#208477 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.