Today's Message Index:
----------------------
1. 04:59 AM - Re: removal from list.... (Albert Gardner)
2. 05:49 AM - Re: Avionics Interconnect (RV Builder (Michael Sausen))
3. 06:03 AM - Re: Avionics Interconnect (Dave Leikam)
4. 06:26 AM - Re: Seat Belts (lbgjb10)
5. 06:52 AM - Re: Re: Seat Belts (David McNeill)
6. 06:52 AM - Re: removal from list.... (pascal)
7. 06:52 AM - Re: Re: Seat Belts (Deems Davis)
8. 06:56 AM - Re: Re: Seat Belts (RV Builder (Michael Sausen))
9. 07:04 AM - Re: Avionics Interconnect (Jim)
10. 07:23 AM - Cabin Door Struts (rv8grover@verizon.net)
11. 08:22 AM - Re: removal from list.... (bminzel)
12. 08:39 AM - Re: removal from list.... (Deems Davis)
13. 09:35 AM - Builders near San Francisco (Lee Otto)
14. 02:27 PM - Re: Cabin Door Struts (greghale)
15. 02:34 PM - Emailing: IMG_0197, IMG_0198, IMG_0199, IMG_0200, IMG_0196 (David McNeill)
16. 02:56 PM - Re: Emailing: IMG_0197, IMG_0198, IMG_0199, IMG_0200, IMG_0196 (Rene Felker)
17. 04:52 PM - Re: unbelievable!!! (docrw)
18. 06:11 PM - 3M flap anti chafe tape (Deems Davis)
19. 06:32 PM - Re: 3M flap anti chafe tape (gary)
20. 09:03 PM - Humor (McGANN, Ron)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | removal from list.... |
At the bottom of each message is a link to the Navigator for all that
stuff
Albert Gardner
Yuma, AZ
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of bminzel
Sent: Monday, December 01, 2008 10:11 PM
Subject: Fw: RV10-List: removal from list....
--- On Mon, 12/1/08, bminzel <bminzel@yahoo.com> wrote:
From: bminzel <bminzel@yahoo.com>
Subject: RV10-List: removal from list....
Hi,
How do I get myself removed from this email list? I'm getting too many
daily
and would prefer to just check the website periodically.
Thank you for your help.
Barbara Minzel
bminzel@yahoo.com
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Avionics Interconnect |
Did anyone else see the RV-10 when they stared at it out of focus? Heh
Do not archive
From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@m
atronics.com] On Behalf Of Jim
Sent: Monday, December 01, 2008 10:49 AM
Subject: RV10-List: Avionics Interconnect
I have attached my avionics interconnect spreadsheet. It does not include
the connections to lights, engine but does include the interface between th
e EFIS, NAVCOM, Transponder, audio panel and GPS. I used this to build a h
arness for the stack.
It may be of some use to others.
My configuration is:
EFIS -> Advanced Flight Systems AF3500 EE
NavCom -> Garmin SL-30
Transponder -> Garmin 327
GPS -> Serial BR-355
Audio -> PS8000B
Jim Combs
N312F - 40192
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Avionics Interconnect |
Have another cup of coffee... things will clear right up.
do not archive
----- Original Message -----
From: RV Builder (Michael Sausen)
To: rv10-list@matronics.com
Sent: Monday, December 01, 2008 12:57 PM
Subject: RE: RV10-List: Avionics Interconnect
Did anyone else see the RV-10 when they stared at it out of focus?
Heh
Do not archive
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Jim
Sent: Monday, December 01, 2008 10:49 AM
To: rv10-list@matronics.com
Subject: RV10-List: Avionics Interconnect
I have attached my avionics interconnect spreadsheet. It does not
include the connections to lights, engine but does include the interface
between the EFIS, NAVCOM, Transponder, audio panel and GPS. I used this
to build a harness for the stack.
It may be of some use to others.
My configuration is:
EFIS -> Advanced Flight Systems AF3500 EE
NavCom -> Garmin SL-30
Transponder -> Garmin 327
GPS -> Serial BR-355
Audio -> PS8000B
Jim Combs
N312F - 40192
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
how difficult is it to 'retro' fit inertial reels to front seats on flying plane??lbb
--------
Larry and Gayle N104LG
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=217319#217319
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
If you look at the procedures on www.inertialbelts.com, you will need to
create the four hardpoints each belt from the outside of the lid. We used a
cutter inside to cut the inner glass and remove the foam; then we reinforced
the lid with additional layers of glass. This would have to be accomplished
from the outside. If you wish to discuss how to do this, give me a call
480-626-4048. Obviously this will create some need for re paint if the paint
is already on the aircraft.
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of lbgjb10
Sent: Tuesday, December 02, 2008 7:26 AM
Subject: RV10-List: Re: Seat Belts
how difficult is it to 'retro' fit inertial reels to front seats on flying
plane??lbb
--------
Larry and Gayle N104LG
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=217319#217319
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: removal from list.... |
If you look at the bottom of each message there is a way to make
changes:
The RV10-List Email Forum -
Use the Matronics List Features Navigator to browse the many List
utilities such as List Un/Subscription, Archive Search & Download, 7-Day
Browse, Chat, FAQ, Photoshare, and much much more:
http://www.matronics.com/Navigator?RV10-List
From: bminzel
Sent: Monday, December 01, 2008 9:10 PM
Subject: Fw: RV10-List: removal from list....
--- On Mon, 12/1/08, bminzel <bminzel@yahoo.com> wrote:
From: bminzel <bminzel@yahoo.com>
Subject: RV10-List: removal from list....
To: rv10-list@matronics.com
Date: Monday, December 1, 2008, 8:53 PM
Hi,
How do I get myself removed from this email list? I'm
getting too many daily and would prefer to just check the website
periodically.
Thank you for your help.
Barbara Minzel
bminzel@yahoo.com
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Hooker Harness makes an inertial real that mounts with a single bolt, it
does require a bushing to adapt to Van's bolt/screw, but they can supply:
http://deemsrv10.com/album/Sec%2049%20Seats%20&%20Seat%20Belts/slides/DSC06413.html
http://deemsrv10.com/album/Sec%2049%20Seats%20&%20Seat%20Belts/slides/DSC06415.html
Deems Davis # 406
'Its all done....Its just not put together'
http://deemsrv10.com/
lbgjb10 wrote:
>
> how difficult is it to 'retro' fit inertial reels to front seats on flying plane??lbb
>
> --------
> Larry and Gayle N104LG
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=217319#217319
>
>
>
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
You will probably have to send in your existing belts to have the reels put on
if the original manufacturer offers them. That's assuming there is enough slack
to use reels. If you have Hooker belts right now the easiest thing to do
would be to order the same belts again but with the reels this time and then
sell your existing belts.
Michael
-----Original Message-----
From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of lbgjb10
Sent: Tuesday, December 02, 2008 8:26 AM
Subject: RV10-List: Re: Seat Belts
how difficult is it to 'retro' fit inertial reels to front seats on flying plane??lbb
--------
Larry and Gayle N104LG
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=217319#217319
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Avionics Interconnect |
Actually if you print it, It is much easier to read.
I have it
sized to fit on two sheets. The first sheet is the interfaces to the
EFIS, NAVCOM, Transponder and Audio panel. The second sheet is
pretty much all the audio to the headset connectors.
Jim C
> Have another cup of coffee... things
will clear right up.
>
> do not archive
> -----
Original Message -----
>
From: RV Builder (Michael
Sausen)
> To: rv10-list@matronics.com
> Sent: Monday,
December 01, 2008 12:57 PM
> Subject: RE: RV10-List: Avionics
Interconnect
>
>
> Did anyone else see the
RV-10 when they stared at it out of focus? Heh
>
>
>
> Do not archive
>
>
>
>
From: owner-rv10-list-server@matronics.com
>
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Jim
>
Sent: Monday, December 01, 2008 10:49 AM
> To:
rv10-list@matronics.com
> Subject: RV10-List: Avionics
Interconnect
>
>
>
> I have attached
my avionics interconnect spreadsheet. It does not
> include the
connections to lights, engine but does include the interface
>
between the EFIS, NAVCOM, Transponder, audio panel and GPS. I used
this
> to build a harness for the stack.
>
> It
may be of some use to others.
>
> My configuration
is:
>
> EFIS -> Advanced Flight Systems AF3500 EE
> NavCom -> Garmin SL-30
> Transponder -> Garmin
327
> GPS -> Serial BR-355
> Audio -> PS8000B
>
> Jim Combs
> N312F - 40192
>
>
>
>
>
>
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Cabin Door Struts |
After I added some interior to the cabin doors they would constantly fall down.
I found an replacement for the gas strut that Van's supplies that has 600 newtons
force instead of the 500 newtons force with the van's strut. They were more
expensive but it was worth it not to be hit in the head by the doors. They
are Lift-o-Mat 2218LP made by Stabilus. I found them at JWF Technologies, 6820
Fairfield Business Drive, Fairfield. OH 45014.
www.JWFtechnologies.com
Ron Grover
40063
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=217333#217333
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: removal from list.... |
I didn't find the link to be helpful in removing me from e-mails from the w
ebsite.
It just gave me-a list of the lists. When I tried the one list I thought
could be the one I was on I just got an e-mail address. Type Remove to it?
--- On Tue, 12/2/08, pascal <pascal@rv10builder.net> wrote:
From: pascal <pascal@rv10builder.net>
Subject: Re: RV10-List: removal from list....
If you look at the bottom of each message there is a way to make changes:
-The RV10-List Email Forum -
-Use the Matronics List Features Navigator to browse-the many List util
ities such as List Un/Subscription, Archive Search & Download, 7-Day Browse
, Chat, FAQ, -Photoshare, and much much more: http://www.matronics.com/Na
vigator?RV10-List
-
From: bminzel
Sent: Monday, December 01, 2008 9:10 PM
Subject: Fw: RV10-List: removal from list....
--- On Mon, 12/1/08, bminzel <bminzel@yahoo.com> wrote:
From: bminzel <bminzel@yahoo.com>
Subject: RV10-List: removal from list....
Hi,
-
How do I get myself removed from this email list? I'm getting too many dail
y and would prefer to just check the website periodically.
-
Thank you for your help.
-
Barbara Minzel
bminzel@yahoo.com
-
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
href='3D"http://www.matronics.com/contribution"'>http://www.matronics.com
/contribution
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
href='3D"http://www.matronics.com/Navigator?RV10-List"'>http://www.matron
ics.com/Navigator?RV10-List
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
href='3D"http://forums.matronics.com"'>http://forums.matronics.com
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: removal from list.... |
Here's the link to the page you need.
http://www.matronics.com/subscribe/
Just follow the instructions on the page.
Deems
Do Not Archive
bminzel wrote:
> I didn't find the link to be helpful in removing me from e-mails from
> the website.
> It just gave me a list of the lists. When I tried the one list I
> thought could be the one I was on I just got an e-mail address. Type
> Remove to it?
>
>
> --- On *Tue, 12/2/08, pascal /<pascal@rv10builder.net>/* wrote:
>
> From: pascal <pascal@rv10builder.net>
> Subject: Re: RV10-List: removal from list....
> To: rv10-list@matronics.com
> Date: Tuesday, December 2, 2008, 6:52 AM
>
> If you look at the bottom of each message there is a way to make
> changes:
> * The RV10-List Email Forum -
> Use the Matronics List Features Navigator to browse the many List
> utilities such as List Un/Subscription, Archive Search & Download,
> 7-Day Browse, Chat, FAQ, Photoshare, and much much more:
> **http://www.matronics.com/Navigator?RV10-List*
>
>
> *From:* bminzel <mailto:bminzel@yahoo.com>
> *Sent:* Monday, December 01, 2008 9:10 PM
> *To:* rv10-list@matronics.com <mailto:rv10-list@matronics.com>
> *Subject:* Fw: RV10-List: removal from list....
>
>
> --- On *Mon, 12/1/08, bminzel /<bminzel@yahoo.com
> <mailto:bminzel@yahoo.com>>/* wrote:
>
> From: bminzel <bminzel@yahoo.com <mailto:bminzel@yahoo.com>>
> Subject: RV10-List: removal from list....
> To: rv10-list@matronics.com <mailto:rv10-list@matronics.com>
> Date: Monday, December 1, 2008, 8:53 PM
>
> Hi,
>
> How do I get myself removed from this email list? I'm getting
> too many daily and would prefer to just check the website
> periodically.
>
> Thank you for your help.
>
> Barbara Minzel
> bminzel@yahoo.com <mailto:bminzel@yahoo.com>
>
>
> *
>
> *
>
> *
>
> 3D============================================
> href='3D"http://www.matronics.com/contribution"'>http://www.matronics.com/contribution
> 3D============================================
> href='3D"http://www.matronics.com/Navigator?RV10-List"'>http://www.matronics.com/Navigator?RV10-List
> 3D============================================
> href='3D"http://forums.matronics.com"'>http://forums.matronics.com
> 3D============================================
> *
>
> *
>
> *
>
> *
>
> *
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Builders near San Francisco |
I'm going to be at Fort Mason near Fisherman's Warf in San Francisco this
Saturday and Sunday and I was thinking some of you RV-10 builders in the Bay
Area might be open for a visit from a fellow builder. I'll be helping my
wife set up for a show of her photography there and then I'm free for what
looks like most of the weekend. Thanks.
Lee Otto
Visalia, CA
Builder 40773 working on baggage door and cabin floors.
lotto@ciembroidery.com
(559) 651-8022 day time phone
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Cabin Door Struts |
Ron,
I had the same problem with my door struts. I found the company Vans used for
their struts -- Dean Lewis assoc. I had them special order a stronger set for
me. I think they are 600 newtons. I had to pay $75.00. They should be in
by the end of the month. I am curious what you had to pay for the struts you
got.
Greg...
--------
Greg Hale rv10 -- N210KH
www.nwacaptain.com
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=217398#217398
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Emailing: IMG_0197, IMG_0198, IMG_0199, IMG_0200, IMG_0196 |
I received a couple of emails about the inertial belts so I took some
pictures.
(1) the rollers have covers that snap on and could be painted.
(2) I have two small children so created a velcro loop that will catch them
across the chest and prevent upper body from coming forward between the
belts.
(3) One picture show the external SS screw pattern and CS SS washers that
spread the load on the belts. The consulting ME (a neighbor) indicates that
the additional hardpoints and CS washers should be 8-10 times as strong as
the Vans (single CS #5 screw without CS washer) in a crash.
(4) there are a couple of shots that show the buckle options. If it looks
like the Boeing stuff ; it is. AMSAFE has that contract.
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Emailing: IMG_0197, IMG_0198, IMG_0199, IMG_0200, IMG_0196 |
I covered my plastic covers with headliner material. Worked great.
Rene' Felker
RV-10 N423CF Flying
801-721-6080
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of David McNeill
Sent: Tuesday, December 02, 2008 3:33 PM
Subject: RV10-List: Emailing: IMG_0197, IMG_0198, IMG_0199, IMG_0200,
IMG_0196
I received a couple of emails about the inertial belts so I took some
pictures.
(1) the rollers have covers that snap on and could be painted.
(2) I have two small children so created a velcro loop that will catch them
across the chest and prevent upper body from coming forward between the
belts.
(3) One picture show the external SS screw pattern and CS SS washers that
spread the load on the belts. The consulting ME (a neighbor) indicates that
the additional hardpoints and CS washers should be 8-10 times as strong as
the Vans (single CS #5 screw without CS washer) in a crash.
(4) there are a couple of shots that show the buckle options. If it looks
like the Boeing stuff ; it is. AMSAFE has that contract.
Message 17
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: unbelievable!!! |
Hi Guys,
I found this forum on the net today which mentioned me buying this RV-10, which
by the way never happened.
What happened is I was looking at it and back paged and there was a glitch and
it ended up doing a BIN. I worked it out with the seller and all was resolved.
So put it to rest that nobody bought the plane for $100K with a V-8 engine in it,
and I hope no one was that silly to try it.
David Hiatt
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=217417#217417
Message 18
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | 3M flap anti chafe tape |
I was given some of the above from a friend, and intend to apply it to
the underside of the wing trailing edge to protect the paint on the
flaps. My question is:
Just how sticky is the adhesive supposed to be? I've got and followed
the printed instruction from 3M on a 'wet' application, and applied a
10" test piece tonight and will check it in the morning, But to my mind
this stuff peels off too easily.
For those of you that have applied this, is this something that you
should be able to peel off without a lot of force, or is this something
that should stick like the foam double sided tape?
Deems Davis # 406
'Its all done....Its just not put together'
http://deemsrv10.com/
Message 19
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | 3M flap anti chafe tape |
I have never applied it wet, but it should stick like foam tape does.
Gary Specketer
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Deems Davis
Sent: Tuesday, December 02, 2008 9:10 PM
Subject: RV10-List: 3M flap anti chafe tape
I was given some of the above from a friend, and intend to apply it to
the underside of the wing trailing edge to protect the paint on the
flaps. My question is:
Just how sticky is the adhesive supposed to be? I've got and followed
the printed instruction from 3M on a 'wet' application, and applied a
10" test piece tonight and will check it in the morning, But to my mind
this stuff peels off too easily.
For those of you that have applied this, is this something that you
should be able to peel off without a lot of force, or is this something
that should stick like the foam double sided tape?
Deems Davis # 406
'Its all done....Its just not put together'
http://deemsrv10.com/
Message 20
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
How many can relate to this??
"Warning:
The information contained in this email and any attached files is
confidential to BAE Systems Australia. If you are not the intended
recipient, any use, disclosure or copying of this email or any
attachments is expressly prohibited. If you have received this email
in error, please notify us immediately. VIRUS: Every care has been
taken to ensure this email and its attachments are virus free,
however, any loss or damage incurred in using this email is not the
sender's responsibility. It is your responsibility to ensure virus
checks are completed before installing any data sent in this email to
your computer."
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|