---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Fri 12/05/08: 23 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:11 AM - How to create epoxy threads (Michael Wellenzohn) 2. 03:43 AM - Re: How to create epoxy threads (David McNeill) 3. 03:44 AM - Re: How to create epoxy threads (David McNeill) 4. 05:00 AM - Re: How to create epoxy threads (Bobby J. Hughes) 5. 05:26 AM - N110TD Wow really big news (John Cox) 6. 05:48 AM - Re: N110TD Wow really big news (Tim Olson) 7. 06:02 AM - Re: N110TD Wow really big news (RV Builder (Michael Sausen)) 8. 06:41 AM - aileron trim (Gwayne) 9. 07:01 AM - Re: aileron trim (Tim Olson) 10. 07:03 AM - Re: aileron trim (RV Builder (Michael Sausen)) 11. 07:12 AM - Re: How to create epoxy threads (John Gonzalez) 12. 07:31 AM - Re: N110TD Wow really big news (Bill Gipson) 13. 07:36 AM - Re: N110TD Wow really big news (David Hertner) 14. 08:38 AM - Re: How to create epoxy threads (Don McDonald) 15. 09:07 AM - Re: aileron trim (Rene Felker) 16. 09:47 AM - Re: aileron trim (Tim Olson) 17. 09:54 AM - Re: aileron trim (Condrey, Bob (US SSA)) 18. 10:02 AM - Re: aileron trim (John Cumins) 19. 10:31 AM - OP-37 Electriccal instructions (Rick Sked) 20. 10:33 AM - Re: How to create epoxy threads (Rick Sked) 21. 11:17 AM - Re: OP-37 Electriccal instructions (John Jessen) 22. 11:21 AM - Re: OP-37 Electriccal instructions (Rick Sked) 23. 12:33 PM - Re: OP-37 Electriccal instructions (linn Walters) ________________________________ Message 1 _____________________________________ Time: 02:11:14 AM PST US Subject: RV10-List: How to create epoxy threads From: "Michael Wellenzohn" Hi, I am using a composite cover inside of the doors to cover the lock and door handles mechanics. I now face the issue that I need to have threads in between the door shelfs to screw the cover to the door. Nutplates won't work since I do not have access. I read about rivnuts but I'd like to use epoxy and make the thread myself. Any ideas? How did you do it? Michael -------- RV-10 builder (engine, prop, finishing) #511 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=217727#217727 ________________________________ Message 2 _____________________________________ Time: 03:43:29 AM PST US From: "David McNeill" Subject: RE: RV10-List: How to create epoxy threads Create a hard point. Use a small diameter stub of pipe. PVC? Fill with putty (epoxy,fibers and cabosil). Lastly drill and tap. -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Michael Wellenzohn Sent: Friday, December 05, 2008 3:08 AM Subject: RV10-List: How to create epoxy threads --> Hi, I am using a composite cover inside of the doors to cover the lock and door handles mechanics. I now face the issue that I need to have threads in between the door shelfs to screw the cover to the door. Nutplates won't work since I do not have access. I read about rivnuts but I'd like to use epoxy and make the thread myself. Any ideas? How did you do it? Michael -------- RV-10 builder (engine, prop, finishing) #511 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=217727#217727 ________________________________ Message 3 _____________________________________ Time: 03:44:19 AM PST US From: "David McNeill" Subject: RE: RV10-List: How to create epoxy threads If dopr is thick enough already just drill and tap. -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Michael Wellenzohn Sent: Friday, December 05, 2008 3:08 AM Subject: RV10-List: How to create epoxy threads --> Hi, I am using a composite cover inside of the doors to cover the lock and door handles mechanics. I now face the issue that I need to have threads in between the door shelfs to screw the cover to the door. Nutplates won't work since I do not have access. I read about rivnuts but I'd like to use epoxy and make the thread myself. Any ideas? How did you do it? Michael -------- RV-10 builder (engine, prop, finishing) #511 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=217727#217727 ________________________________ Message 4 _____________________________________ Time: 05:00:36 AM PST US Subject: RE: RV10-List: How to create epoxy threads From: "Bobby J. Hughes" I am using aluminum rivnuts in several places to attach the Flightline Interior panels. Easy to install, lightweight and non-locking so you can continue to use the same screw after removal. Bobby 40116 -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Michael Wellenzohn Sent: Friday, December 05, 2008 4:08 AM Subject: RV10-List: How to create epoxy threads --> Hi, I am using a composite cover inside of the doors to cover the lock and door handles mechanics. I now face the issue that I need to have threads in between the door shelfs to screw the cover to the door. Nutplates won't work since I do not have access. I read about rivnuts but I'd like to use epoxy and make the thread myself. Any ideas? How did you do it? Michael -------- RV-10 builder (engine, prop, finishing) #511 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=217727#217727 ________________________________ Message 5 _____________________________________ Time: 05:26:46 AM PST US Subject: RV10-List: N110TD Wow really big news From: "John Cox" Couldn't sleep and stumbled onto this exciting news from yesterday. Todd Swezey's Vesta V-8 LS2 powered RV-10 took to safe flight in Georgia. Congrats to another Alt Engine. John Cox ________________________________ Message 6 _____________________________________ Time: 05:48:02 AM PST US From: Tim Olson Subject: Re: RV10-List: N110TD Wow really big news I think that's maybe a first since Dan's. Is there any news on the Subies yet? It's been over a year since Dan's crash and at that time it sounded like there were quite a few that were "just around the corner"...but there hasn't been any news that I've heard since 2007. I'd have bet that the Subies would beat the V-8's into the air, but it doesn't look like that's the case. Will be nice to hear some flight reports once they spend some time getting good calibrated numbers. Tim Olson - RV-10 N104CD - Flying do not archive John Cox wrote: > Couldn't sleep and stumbled onto this exciting news from yesterday. > Todd Swezey's Vesta V-8 LS2 powered RV-10 took to safe flight in Georgia. > > Congrats to another Alt Engine. > > John Cox > ________________________________ Message 7 _____________________________________ Time: 06:02:11 AM PST US From: "RV Builder (Michael Sausen)" Subject: RE: RV10-List: N110TD Wow really big news The funny thing is that the V8's seem to be less complicated to convert to our use. I guess there are enough off the shelf aftermarket components and excess HP in the small blocks to do the job. I have to say I was fairly impressed by the V8 I saw run at OSH. Michael -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Tim Olson Sent: Friday, December 05, 2008 7:46 AM Subject: Re: RV10-List: N110TD Wow really big news I think that's maybe a first since Dan's. Is there any news on the Subies yet? It's been over a year since Dan's crash and at that time it sounded like there were quite a few that were "just around the corner"...but there hasn't been any news that I've heard since 2007. I'd have bet that the Subies would beat the V-8's into the air, but it doesn't look like that's the case. Will be nice to hear some flight reports once they spend some time getting good calibrated numbers. Tim Olson - RV-10 N104CD - Flying do not archive John Cox wrote: > Couldn't sleep and stumbled onto this exciting news from yesterday. > Todd Swezey's Vesta V-8 LS2 powered RV-10 took to safe flight in Georgia. > > Congrats to another Alt Engine. > > John Cox > ________________________________ Message 8 _____________________________________ Time: 06:41:48 AM PST US Subject: RV10-List: aileron trim From: "Gwayne" I haven't seen any info on the aileron trim and wondering if its a no brainier and everyone is installing it or not a issue on the -10?? I use my manual one all the time on my -7 but can only find a electronic one for the -10 on Van's web store. Thanks -------- Wayne RV 7 "eh?" 120 hrs RV 10 fuse Read this topic online here: http://forums.matronics.com/viewtopic.php?p=217758#217758 ________________________________ Message 9 _____________________________________ Time: 07:01:00 AM PST US From: Tim Olson Subject: Re: RV10-List: aileron trim For the -10, the factory way is the electronic one. It's something that most people will want, as I've noticed with the RV-10's long-ish fuel tanks, there can be quite the imbalance as you fly. Tim Olson - RV-10 N104CD - Flying do not archive Gwayne wrote: > > I haven't seen any info on the aileron trim and wondering if its a no > brainier and everyone is installing it or not a issue on the -10?? I > use my manual one all the time on my -7 but can only find a > electronic one for the -10 on Van's web store. > > Thanks > > -------- Wayne RV 7 "eh?" 120 hrs RV 10 fuse > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=217758#217758 > ________________________________ Message 10 ____________________________________ Time: 07:03:08 AM PST US From: "RV Builder (Michael Sausen)" Subject: RE: RV10-List: aileron trim As far as I know there is no manual aileron trim options for the -10. I think most people are installing it given the amount of fuel onboard in the wings. If you are really good at managing your fuel balance you can get by without it I'm sure but it's not a huge expense in the grand scheme of things. Michael -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Gwayne Sent: Friday, December 05, 2008 8:39 AM Subject: RV10-List: aileron trim I haven't seen any info on the aileron trim and wondering if its a no brainier and everyone is installing it or not a issue on the -10?? I use my manual one all the time on my -7 but can only find a electronic one for the -10 on Van's web store. Thanks -------- Wayne RV 7 "eh?" 120 hrs RV 10 fuse Read this topic online here: http://forums.matronics.com/viewtopic.php?p=217758#217758 ________________________________ Message 11 ____________________________________ Time: 07:12:48 AM PST US From: John Gonzalez Subject: RE: RV10-List: How to create epoxy threads Hardwood dowels would work will too. Drill out a hole=2C cut dowel to lengt h=2C glue in.Not likely you will be removing the screws enough that the thr eads will wear with the screws.> From: dlm46007@cox.net> To: rv10-list@matr onics.com> Subject: RE: RV10-List: How to create epoxy threads> Date: Fri Neill" > > Create a hard point. Use a small diameter stub of pipe. PVC? Fill with putty> (epoxy=2Cfibers and cabosil). Lastly drill and tap. > > -----Original Message-----> From: owner-rv10-list-server@matro nics.com> [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Michae l> Wellenzohn> Sent: Friday=2C December 05=2C 2008 3:08 AM> To: rv10-list@m atronics.com> Subject: RV10-List: How to create epoxy threads> > --> RV10-L ist message posted by: "Michael Wellenzohn" > --> > > Hi=2C> I am using a composite cover inside of the doors to cover the lock and door> handles mechanics.> I now face the issue that I need to have thre ads in between the door shelfs> to screw the cover to the door.> > Nutplate s won't work since I do not have access. I read about rivnuts but> I'd like to use epoxy and make the thread myself.> Any ideas? How did you do it?> > > Michael> > --------> RV-10 builder (engine=2C prop=2C finishing)> #511> > > > > Read this topic online here:> > http://forums.matronics.com/viewtop =========> > > ________________________________ Message 12 ____________________________________ Time: 07:31:16 AM PST US From: "Bill Gipson" Subject: RE: RV10-List: N110TD Wow really big news Tim et al. notice today from Eggenfellner that the counterweights for the 4-bladed RV-10 props won't be delivered from Italy (Quinti) until late January. That's why things have gone quiet on the Subie front. In the mean time I've actually abandoned the Subaru idea (anyone want a Subaru E-6T FWF?) in favor of a Chevy LS1 package built by Bud Warren (Geareddrives). He performs his magic everyday in the same hangar I'm in, so for that reason and others, it just made a lot of sense to switch to his package. The package is simple, yet impressive and Bud is a real pleasure to work with. Pictures will be posted on the Geareddrives website shortly and flight reports will be forthcoming once we fly. We've had it running at idle speeds for checkout and it just purrs. This weekend we will run it up to higher power settings. If the Lord is willing and the creek doesn't rise, we should be at Sun N Fun '09. Bill Gipson Conroe, Texas N730WL -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Tim Olson Sent: Friday, December 05, 2008 7:46 AM Subject: Re: RV10-List: N110TD Wow really big news I think that's maybe a first since Dan's. Is there any news on the Subies yet? It's been over a year since Dan's crash and at that time it sounded like there were quite a few that were "just around the corner"...but there hasn't been any news that I've heard since 2007. I'd have bet that the Subies would beat the V-8's into the air, but it doesn't look like that's the case. Will be nice to hear some flight reports once they spend some time getting good calibrated numbers. Tim Olson - RV-10 N104CD - Flying do not archive John Cox wrote: > Couldn't sleep and stumbled onto this exciting news from yesterday. > Todd Swezey's Vesta V-8 LS2 powered RV-10 took to safe flight in Georgia. > > Congrats to another Alt Engine. > > John Cox > ________________________________ Message 13 ____________________________________ Time: 07:36:57 AM PST US From: David Hertner Subject: Re: RV10-List: N110TD Wow really big news We are planning on having our Geared Drives LS1 installed next summer and to have it into the air in the early spring of '10. Dave Hertner Do Not Archive John Cox wrote: > Couldn't sleep and stumbled onto this exciting news from yesterday. > Todd Swezey's Vesta V-8 LS2 powered RV-10 took to safe flight in Georgia. > > Congrats to another Alt Engine. > > John Cox > > * > > * ________________________________ Message 14 ____________________________________ Time: 08:38:53 AM PST US From: Don McDonald Subject: RE: RV10-List: How to create epoxy threads Can't understand why noone has suggested just floxing or micro-ballooning i n an odd shaped piece of aluminum.- The odd shape will keep it from spinn ing, and drilling and tapping is simple. Don --- On Fri, 12/5/08, John Gonzalez wrote: From: John Gonzalez Subject: RE: RV10-List: How to create epoxy threads #yiv1920014348 .hmmessage P { margin:0px;padding:0px;} #yiv1920014348 { font-size:10pt;font-family:Verdana;} Hardwood dowels would work will too. Drill out a hole, cut dowel to length, glue in. Not likely you will be removing the screws enough that the threads will wea r with the screws. > From: dlm46007@cox.net > To: rv10-list@matronics.com > Subject: RE: RV10-List: How to create epoxy threads > Date: Fri, 5 Dec 2008 04:40:21 -0700 > > > Create a hard point. Use a small diameter stub of pipe. PVC? Fill with pu tty > (epoxy,fibers and cabosil). Lastly drill and tap. > > -----Original Message----- > From: owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Michael > Wellenzohn > Sent: Friday, December 05, 2008 3:08 AM > To: rv10-list@matronics.com > Subject: RV10-List: How to create epoxy threads > > --> > > Hi, > I am using a composite cover inside of the doors to cover the lock and do or > handles mechanics. > I now face the issue that I need to have threads in between the door shel fs > to screw the cover to the door. > > Nutplates won't work since I do not have access. I read about rivnuts but > I'd like to use epoxy and make the thread myself. > Any ideas? How did you do it? > > > Michael > > -------- > RV-10 builder (engine, prop, finishing) > #511 > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=217727#217727 > > > > > > >====================== > ===================== > > > =0A=0A=0A ________________________________ Message 15 ____________________________________ Time: 09:07:24 AM PST US From: "Rene Felker" Subject: RE: RV10-List: aileron trim In my experience, full fuel and fat pilot = imbalance. I am glade I install mine and use it often. Rene' Felker RV-10 N423CF Flying 801-721-6080 -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of RV Builder (Michael Sausen) Sent: Friday, December 05, 2008 7:59 AM Subject: RE: RV10-List: aileron trim As far as I know there is no manual aileron trim options for the -10. I think most people are installing it given the amount of fuel onboard in the wings. If you are really good at managing your fuel balance you can get by without it I'm sure but it's not a huge expense in the grand scheme of things. Michael -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Gwayne Sent: Friday, December 05, 2008 8:39 AM Subject: RV10-List: aileron trim I haven't seen any info on the aileron trim and wondering if its a no brainier and everyone is installing it or not a issue on the -10?? I use my manual one all the time on my -7 but can only find a electronic one for the -10 on Van's web store. Thanks -------- Wayne RV 7 "eh?" 120 hrs RV 10 fuse Read this topic online here: http://forums.matronics.com/viewtopic.php?p=217758#217758 ________________________________ Message 16 ____________________________________ Time: 09:47:04 AM PST US From: Tim Olson Subject: Re: RV10-List: aileron trim Hey, you don't have to talk about me like that! :) Tim Olson - RV-10 N104CD - Flying do not archive Rene Felker wrote: > > In my experience, full fuel and fat pilot = imbalance. I am glade I install > mine and use it often. > > Rene' Felker > RV-10 N423CF Flying > 801-721-6080 > -----Original Message----- > From: owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] On Behalf Of RV Builder > (Michael Sausen) > Sent: Friday, December 05, 2008 7:59 AM > To: rv10-list@matronics.com > Subject: RE: RV10-List: aileron trim > > > > As far as I know there is no manual aileron trim options for the -10. I > think most people are installing it given the amount of fuel onboard in the > wings. If you are really good at managing your fuel balance you can get by > without it I'm sure but it's not a huge expense in the grand scheme of > things. > > Michael > > -----Original Message----- > From: owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Gwayne > Sent: Friday, December 05, 2008 8:39 AM > To: rv10-list@matronics.com > Subject: RV10-List: aileron trim > > > I haven't seen any info on the aileron trim and wondering if its a no > brainier and everyone is installing it or not a issue on the -10?? > I use my manual one all the time on my -7 but can only find a electronic one > for the -10 on Van's web store. > > Thanks > > -------- > Wayne > RV 7 "eh?" 120 hrs > RV 10 fuse > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=217758#217758 > > > > > > > > > > > > > > > > > > > ________________________________ Message 17 ____________________________________ Time: 09:54:35 AM PST US Subject: RE: RV10-List: aileron trim From: "Condrey, Bob (US SSA)" It probably applies to a LOT of us... -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Tim Olson Sent: Friday, December 05, 2008 10:46 AM Subject: Re: RV10-List: aileron trim Hey, you don't have to talk about me like that! :) Tim Olson - RV-10 N104CD - Flying do not archive Rene Felker wrote: > > In my experience, full fuel and fat pilot = imbalance. I am glade I install > mine and use it often. > > Rene' Felker > RV-10 N423CF Flying > 801-721-6080 > -----Original Message----- > From: owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] On Behalf Of RV Builder > (Michael Sausen) > Sent: Friday, December 05, 2008 7:59 AM > To: rv10-list@matronics.com > Subject: RE: RV10-List: aileron trim > > > > As far as I know there is no manual aileron trim options for the -10. I > think most people are installing it given the amount of fuel onboard in the > wings. If you are really good at managing your fuel balance you can get by > without it I'm sure but it's not a huge expense in the grand scheme of > things. > > Michael > > -----Original Message----- > From: owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Gwayne > Sent: Friday, December 05, 2008 8:39 AM > To: rv10-list@matronics.com > Subject: RV10-List: aileron trim > > > I haven't seen any info on the aileron trim and wondering if its a no > brainier and everyone is installing it or not a issue on the -10?? > I use my manual one all the time on my -7 but can only find a electronic one > for the -10 on Van's web store. > > Thanks > > -------- > Wayne > RV 7 "eh?" 120 hrs > RV 10 fuse > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=217758#217758 > > > > > > > > > > > > > > > > > > > ________________________________ Message 18 ____________________________________ Time: 10:02:54 AM PST US From: "John Cumins" Subject: RE: RV10-List: aileron trim Hey There is no such thing as a fat Pilot, just a well nourished pilot. Sounds good to me. John G. Cumins 40864 In parts finding mode Horv stab build Your Total Technology Solution Provider -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Tim Olson Sent: Friday, December 05, 2008 9:46 AM Subject: Re: RV10-List: aileron trim Hey, you don't have to talk about me like that! :) Tim Olson - RV-10 N104CD - Flying do not archive Rene Felker wrote: > > In my experience, full fuel and fat pilot = imbalance. I am glade I install > mine and use it often. > > Rene' Felker > RV-10 N423CF Flying > 801-721-6080 > -----Original Message----- > From: owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] On Behalf Of RV Builder > (Michael Sausen) > Sent: Friday, December 05, 2008 7:59 AM > To: rv10-list@matronics.com > Subject: RE: RV10-List: aileron trim > > > > As far as I know there is no manual aileron trim options for the -10. I > think most people are installing it given the amount of fuel onboard in the > wings. If you are really good at managing your fuel balance you can get by > without it I'm sure but it's not a huge expense in the grand scheme of > things. > > Michael > > -----Original Message----- > From: owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Gwayne > Sent: Friday, December 05, 2008 8:39 AM > To: rv10-list@matronics.com > Subject: RV10-List: aileron trim > > > I haven't seen any info on the aileron trim and wondering if its a no > brainier and everyone is installing it or not a issue on the -10?? > I use my manual one all the time on my -7 but can only find a electronic one > for the -10 on Van's web store. > > Thanks > > -------- > Wayne > RV 7 "eh?" 120 hrs > RV 10 fuse > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=217758#217758 > > > > > > > > > > > > > > > > > > > ________________________________ Message 19 ____________________________________ Time: 10:31:46 AM PST US From: Rick Sked Subject: RV10-List: OP-37 Electriccal instructions Anyone have a copy of the Vans wiring kit instructions called the OP-37? I posted a PDF version a ways back but can't seem to find it on my hard drive. I have a request for it and want to avoid having to scan the pages again. Rick S. 40185 ________________________________ Message 20 ____________________________________ Time: 10:33:27 AM PST US From: Rick Sked Subject: Re: RV10-List: How to create epoxy threads It's really just as easy to make up the flox, no need for any metal. The ep oxy/flox mixture drills and taps very nicely. I did embed a 1" dowel into m y doors for a pull down strap though. Rick S. 40185 ----- Original Message ----- From: "Don McDonald" Sent: Friday, December 5, 2008 8:37:55 AM (GMT-0800) America/Los_Angeles Subject: RE: RV10-List: How to create epoxy threads Can't understand why noone has suggested just floxing or micro-ballooning i n an odd shaped piece of aluminum.=C2- The odd shape will keep it from sp inning, and drilling and tapping is simple. Don --- On Fri, 12/5/08, John Gonzalez wrote: From: John Gonzalez Subject: RE: RV10-List: How to create epoxy threads Hardwood dowels would work will too. Drill out a hole, cut dowel to length, glue in. Not likely you will be removing the screws enough that the threads will wea r with the screws. > From: dlm46007@cox.net > To: rv10-list@matronics.com > Subject: RE: RV10-List: How to create epoxy threads > Date: Fri, 5 Dec 2008 04:40:21 -0700 > > > Create a hard point. Use a small diameter stub of pipe. PVC? Fill with pu tty > (epoxy,fibers and cabosil). Lastly drill and tap. > > -----Original Message----- > From: owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Michael > Wellenzohn > Sent: Friday, December 05, 2008 3:08 AM > To: rv10-list@matronics.com > Subject: RV10-List: How to create epoxy threads > > --> > > Hi, > I am using a composite cover inside of the doors to cover the lock and do or > handles mechanics. > I now face the issue that I need to have threads in between the door shel fs > to screw the cover to the door. > > Nutplates won't work since I do not have access. I read about rivnuts but > I'd like to use epoxy and make the thread myself. > Any ideas? How did you do it? > > > Michael > > -------- > RV-10 builder (engine, prop, finishing) > #511 > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=217727#217727 > > > > > > >======================= > ====================== > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D ________________________________ Message 21 ____________________________________ Time: 11:17:41 AM PST US From: "John Jessen" Subject: RE: RV10-List: OP-37 Electriccal instructions Is this what you need? _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Rick Sked Sent: Friday, December 05, 2008 10:31 AM Subject: RV10-List: OP-37 Electriccal instructions Anyone have a copy of the Vans wiring kit instructions called the OP-37? I posted a PDF version a ways back but can't seem to find it on my hard drive. I have a request for it and want to avoid having to scan the pages again. Rick S. 40185 ________________________________ Message 22 ____________________________________ Time: 11:21:52 AM PST US From: Rick Sked Subject: Re: RV10-List: OP-37 Electriccal instructions Thanks everyone!!! I now have a copy back on my computer thanks to the list!! ----- Original Message ----- From: "Rick Sked" Sent: Friday, December 5, 2008 10:30:45 AM (GMT-0800) America/Los_Angeles Subject: RV10-List: OP-37 Electriccal instructions Anyone have a copy of the Vans wiring kit instructions called the OP-37? I posted a PDF version a ways back but can't seem to find it on my hard drive. I have a request for it and want to avoid having to scan the pages again. Rick S. ________________________________ Message 23 ____________________________________ Time: 12:33:20 PM PST US From: linn Walters Subject: Re: RV10-List: OP-37 Electriccal instructions I got it too! But you can send the pics anyway :-) Linn Rick Sked wrote: > Thanks everyone!!! I now have a copy back on my computer thanks to the > list!! > ----- Original Message ----- > From: "Rick Sked" > To: rv10-list@matronics.com > Sent: Friday, December 5, 2008 10:30:45 AM (GMT-0800) America/Los_Angeles > Subject: RV10-List: OP-37 Electriccal instructions > > Anyone have a copy of the Vans wiring kit instructions called the > OP-37? I posted a PDF version a ways back but can't seem to find it on > my hard drive. I have a request for it and want to avoid having to > scan the pages again. > > Rick S. > 40185 > * > > * > * > > * ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.