---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sat 04/11/09: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:48 PM - annual inspection (David McNeill) 2. 09:51 PM - 8050-2 form (Bob Turner) 3. 11:13 PM - Re: 8050-2 form (Don McDonald) ________________________________ Message 1 _____________________________________ Time: 01:48:37 PM PST US From: "David McNeill" Subject: RV10-List: annual inspection Currently in the first annual at 135TT. Just installed the new Matco axle. Very easy install. Installed an addtional Odyssey 680 on the firewal. pictures enclosed. found some surface corrosion on the aileron torque tubes ; removed and treating with AVL externaly and internally Found slight seap of 5606 at the hard line bulkhead fitting at the tunnel for left main. Probably caused the left line to suck a little air and drag the left brake. left brake worn more than right, will replace both and new tires. My guess is that the tires have 250-300 landings. Horizontal stab bulkhead shows no stress whatsoever; we used Hi-Locs to install stab into he longerons. Found some abraison on the right side of tunnel caused by left rudder pedal linkage bolt Will put a thin delrin sheet on the side of the tunnel or perhaps stainless. ________________________________ Message 2 _____________________________________ Time: 09:51:12 PM PST US Subject: RV10-List: 8050-2 form From: "Bob Turner" For registration, the EAA says a bill of sale is needed from Vans, not the invoice, and suggests FAA form 8050-2. Does Vans send this with the finishing kit? On request? Or is the other paperwork from Vans sufficient? -------- Bob Turner RV-10 QB Read this topic online here: http://forums.matronics.com/viewtopic.php?p=238748#238748 ________________________________ Message 3 _____________________________________ Time: 11:13:38 PM PST US From: Don McDonald Subject: Re: RV10-List: 8050-2 form Upon request Van's will provide you with a REAL bill of Sale.... they know what to send you. Don McDonald --- On Sat, 4/11/09, Bob Turner wrote: From: Bob Turner Subject: RV10-List: 8050-2 form For registration, the EAA says a bill of sale is needed from Vans, not the invoice, and suggests FAA form 8050-2. Does Vans send this with the finishing kit? On request? Or is the other pap erwork from Vans sufficient? -------- Bob Turner RV-10 QB Read this topic online here: http://forums.matronics.com/viewtopic.php?p=238748#238748 le, List Admin. =0A=0A=0A ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.