---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sun 04/19/09: 22 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:06 AM - Re: N519PJ Slipped the Surly Bonds of Earth............ (Patrick Pulis) 2. 03:36 AM - Re: N519PJ Slipped the Surly Bonds of Earth............ (Neal George) 3. 04:00 AM - Re: N519PJ Slipped the Surly Bonds of Earth............ (Bob Leffler) 4. 04:08 AM - Re: N519PJ Slipped the Surly Bonds of Earth............ (Wayne Edgerton) 5. 04:54 AM - Re: N519PJ Slipped the Surly Bonds of Earth............ (gary) 6. 04:58 AM - Re: N519PJ Slipped the Surly Bonds of Earth............ (Ralph E. Capen) 7. 06:24 AM - Re: N519PJ Slipped the Surly Bonds of Earth............ (David Maib) 8. 06:51 AM - Re: N519PJ Slipped the Surly Bonds of Earth............ (jim@CombsFive.Com) 9. 07:24 AM - Re: N519PJ Slipped the Surly Bonds of Earth............ (Don McDonald) 10. 09:06 AM - Re: N519PJ Slipped the Surly Bonds of Earth............ (RV Builder (Michael Sausen)) 11. 09:22 AM - 1st flight video N519PJ (Deems Davis) 12. 11:06 AM - Re: N519PJ Slipped the Surly Bonds of Earth............ (efdsteve@aol.com) 13. 11:46 AM - Looking from RV-10 clamping block (Bob Leffler) 14. 12:35 PM - Re: Looking from RV-10 clamping block (gary) 15. 12:39 PM - Re: 1st flight video N519PJ (Don McDonald) 16. 01:49 PM - Re: N519PJ Slipped the Surly Bonds of Earth............ (Michael Wellenzohn) 17. 01:56 PM - Re: Looking from RV-10 clamping block (Bob Leffler) 18. 03:14 PM - Re: 1st flight video N519PJ (woxofswa) 19. 06:02 PM - Re: N519PJ Slipped the Surly Bonds of Earth............ (richard sipp) 20. 06:13 PM - Re: N519PJ Slipped the Surly Bonds of Earth............ (Byron Gillespie) 21. 09:04 PM - Re: N519PJ Slipped the Surly Bonds of Earth............ (AirMike) 22. 10:29 PM - Re: 1st flight video N519PJ (Scott Schmidt) ________________________________ Message 1 _____________________________________ Time: 02:06:30 AM PST US From: Patrick Pulis Subject: Re: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ Congratulations from down-under mate.- Well done.=0A=0AWishing you clear, safe and smooth skies always Deems.=0A=0ARegards=0A=0APatrick Pulis=0ARV-1 0---- #40299-- VH-XPP=0AAdelaide, South Australia=0A=0A=0A=0A =0A________________________________=0AFrom: Deems Davis =0ATo: rv10-list@matronics.com=0ASent: Sunday, 19 April, 2009 10:59:06 AM =0ASubject: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ =0A......... And I held on for the ride :-)=0A=0A=0AWhat a ride !!!!!!!!!!! !!!=0A=0A=0Ahttp://deemsrv10.com/album/First%20Flight%20APR%2018%202009/ind ex.html=0A=0A=0ADeems Davis # 406=0A'Its all done.... !!!!!!!!!!!!!!!!!!!! =========================0A =0A=0A Enjoy a better web experience. Upgrade to the new Internet Expl orer 8 optimised for Yahoo!7. Get it now. ________________________________ Message 2 _____________________________________ Time: 03:36:26 AM PST US From: "Neal George" Subject: RE: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ You can't go flying yet ! There's bound to be another mod you need ... somewhere ;-). neal -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Deems Davis Sent: Saturday, April 18, 2009 8:29 PM Subject: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ ......... And I held on for the ride :-) What a ride !!!!!!!!!!!!!! http://deemsrv10.com/album/First%20Flight%20APR%2018%202009/index.html Deems Davis # 406 'Its all done.... !!!!!!!!!!!!!!!!!!!! http://deemsrv10.com/ ________________________________ Message 3 _____________________________________ Time: 04:00:53 AM PST US From: "Bob Leffler" Subject: RE: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ Congratulations!!!! You inspire me to go out in the garage and start pounding rivets faster.... bob -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Deems Davis Sent: Saturday, April 18, 2009 9:29 PM Subject: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ ......... And I held on for the ride :-) What a ride !!!!!!!!!!!!!! http://deemsrv10.com/album/First%20Flight%20APR%2018%202009/index.html Deems Davis # 406 'Its all done.... !!!!!!!!!!!!!!!!!!!! http://deemsrv10.com/ ________________________________ Message 4 _____________________________________ Time: 04:08:14 AM PST US From: "Wayne Edgerton" Subject: Re: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ Congratulations Deems!!! Plane looks beautiful. The saying goes "let the fun begin" You've worked really hard to get to this point so enjoy it. Wayne Edgerton N602WT ________________________________ Message 5 _____________________________________ Time: 04:54:54 AM PST US From: "gary" Subject: RE: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ Congratulations. It was a long tough road, but you stuck it out and now have your reward. Happy flying and may the electronic gremlins stay away. Gary Specketer -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Deems Davis Sent: Saturday, April 18, 2009 9:29 PM Subject: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ ......... And I held on for the ride :-) What a ride !!!!!!!!!!!!!! http://deemsrv10.com/album/First%20Flight%20APR%2018%202009/index.html Deems Davis # 406 'Its all done.... !!!!!!!!!!!!!!!!!!!! http://deemsrv10.com/ ________________________________ Message 6 _____________________________________ Time: 04:58:45 AM PST US From: "Ralph E. Capen" Subject: Re: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ Congrats! Ralph RV6A N822AR @ N06 11hrs ----- Original Message ----- From: "Deems Davis" Sent: Saturday, April 18, 2009 9:29 PM Subject: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ > > ......... And I held on for the ride :-) > > > What a ride !!!!!!!!!!!!!! > > > http://deemsrv10.com/album/First%20Flight%20APR%2018%202009/index.html > > > Deems Davis # 406 > 'Its all done.... !!!!!!!!!!!!!!!!!!!! > http://deemsrv10.com/ > > > > > ________________________________ Message 7 _____________________________________ Time: 06:24:15 AM PST US From: David Maib Subject: Re: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ How sweet it is!! That's the best "RV Grin" I have ever seen! Your airplane is one of the finest examples of true craftsmanship out there. A heartfelt Congratulations to you, Deems! Best regards, David Maib 40559 On Apr 18, 2009, at 9:29 PM, Deems Davis wrote: ......... And I held on for the ride :-) What a ride !!!!!!!!!!!!!! http://deemsrv10.com/album/First%20Flight%20APR%2018%202009/index.html Deems Davis # 406 'Its all done.... !!!!!!!!!!!!!!!!!!!! http://deemsrv10.com/ ________________________________ Message 8 _____________________________________ Time: 06:51:31 AM PST US Subject: Re: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ From: jim@CombsFive.Com Congratulations! Jim C Do Not Archive ________________________________ Message 9 _____________________________________ Time: 07:24:39 AM PST US From: Don McDonald Subject: Re: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ Since our first emails over a year and a half ago, we both thought we would -complete at about the same time, and low and behold, we did.- Have fun during the flyoff, and then the real fun will begin.....-this is what we all build for!!!!- Congrats, and hopefully I'll join the ranks soon.- Almost flew last Thursday.... Don N414DM --- On Sat, 4/18/09, Deems Davis wrote: From: Deems Davis Subject: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ ......... And I held on for the ride :-) What a ride !!!!!!!!!!!!!! http://deemsrv10.com/album/First%20Flight%20APR%2018%202009/index.html Deems Davis # 406 'Its all done.... !!!!!!!!!!!!!!!!!!!! http://deemsrv10.com/ le, List Admin. =0A=0A=0A ________________________________ Message 10 ____________________________________ Time: 09:06:24 AM PST US From: "RV Builder (Michael Sausen)" Subject: RE: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ That's awesome!!! Can't wait to finally see it! Michael Do not archive -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Deems Davis Sent: Saturday, April 18, 2009 8:29 PM Subject: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ ......... And I held on for the ride :-) What a ride !!!!!!!!!!!!!! http://deemsrv10.com/album/First%20Flight%20APR%2018%202009/index.html Deems Davis # 406 'Its all done.... !!!!!!!!!!!!!!!!!!!! http://deemsrv10.com/ ________________________________ Message 11 ____________________________________ Time: 09:22:59 AM PST US From: Deems Davis Subject: RV10-List: 1st flight video N519PJ I finally figured out (?) Youtube and posted a video of yesterdays 1st flight. http://www.youtube.com/watch?v=7f6bzUYZZgI Deems Davis # 406 'still grinning..........' http://deemsrv10.com/ ________________________________ Message 12 ____________________________________ Time: 11:06:32 AM PST US Subject: Re: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ From: efdsteve@aol.com Outstanding!!? Your building saga has been motivational and inspiring to say the least.? Thank you for sharing your journey with us through your web site and your postings on Matronics and Van's Air Force.? I've found you to be a wonderful resource?during my own slow-build project. Best wishes on your fly-off. Steve Weinstock 40230 Fuse, engine build Schaumburg, IL -----Original Message----- From: Deems Davis Sent: Sat, 18 Apr 2009 8:29 pm Subject: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ ? .......... And I held on for the ride :-)? ? What a ride !!!!!!!!!!!!!!? ? http://deemsrv10.com/album/First%20Flight%20APR%2018%202009/index.html? ? Deems Davis # 406? 'Its all done.... !!!!!!!!!!!!!!!!!!!!? http://deemsrv10.com/? ? ? ? ________________________________ Message 13 ____________________________________ Time: 11:46:20 AM PST US From: "Bob Leffler" Subject: RV10-List: Looking from RV-10 clamping block I am at the point in the fuselage plans where I need to construct the hardwood clamping block (29-4). It appears that it requires a table saw to cut the compound angles. Unfortunately, I don't have one. My band saw doesn't cut straight enough to make these long cuts and can't handle compound angles. So if there is anyone that didn't do a quick build and is finished with their clamping block that would be interested in selling or loaning their clamping block for awhile, I would be very appreciative. My other alternative is to find somebody locally that may have a table saw that I could use to make the clamping block. Thanks, Bob Do not archive ________________________________ Message 14 ____________________________________ Time: 12:35:44 PM PST US From: "gary" Subject: RE: RV10-List: Looking from RV-10 clamping block I dug mine out of the garage and you are welcome to it. It does have some damage on one end but I don't think it will affect performance. I am still in Georgia, let me know if you want me to ship it up to you. Gary Specketer _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bob Leffler Sent: Sunday, April 19, 2009 2:49 PM Subject: RV10-List: Looking from RV-10 clamping block I am at the point in the fuselage plans where I need to construct the hardwood clamping block (29-4). It appears that it requires a table saw to cut the compound angles. Unfortunately, I don't have one. My band saw doesn't cut straight enough to make these long cuts and can't handle compound angles. So if there is anyone that didn't do a quick build and is finished with their clamping block that would be interested in selling or loaning their clamping block for awhile, I would be very appreciative. My other alternative is to find somebody locally that may have a table saw that I could use to make the clamping block. Thanks, Bob Do not archive ________________________________ Message 15 ____________________________________ Time: 12:39:30 PM PST US From: Don McDonald Subject: Re: RV10-List: 1st flight video N519PJ Hey, I gotta tell you... there must be some kind of an omen here.... just a s I finished watching the video of your first flight, EAA's B-17 flew right over the house! Don McDonald --- On Sun, 4/19/09, Deems Davis wrote: From: Deems Davis Subject: RV10-List: 1st flight video N519PJ I finally figured out (?) Youtube and posted a video of yesterdays 1st flig ht. http://www.youtube.com/watch?v=7f6bzUYZZgI Deems Davis # 406 'still grinning..........' http://deemsrv10.com/ le, List Admin. =0A=0A=0A ________________________________ Message 16 ____________________________________ Time: 01:49:40 PM PST US Subject: RV10-List: Re: N519PJ Slipped the Surly Bonds of Earth............ From: "Michael Wellenzohn" Congrats Deems! -------- RV-10 builder (engine, prop, finishing) #511 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=240156#240156 ________________________________ Message 17 ____________________________________ Time: 01:56:25 PM PST US From: "Bob Leffler" Subject: RE: RV10-List: Looking from RV-10 clamping block Thanks Gary! I sent you an email with my address. Bob Do not archive From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of gary Sent: Sunday, April 19, 2009 3:26 PM Subject: RE: RV10-List: Looking from RV-10 clamping block I dug mine out of the garage and you are welcome to it. It does have some damage on one end but I don't think it will affect performance. I am still in Georgia, let me know if you want me to ship it up to you. Gary Specketer _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bob Leffler Sent: Sunday, April 19, 2009 2:49 PM Subject: RV10-List: Looking from RV-10 clamping block I am at the point in the fuselage plans where I need to construct the hardwood clamping block (29-4). It appears that it requires a table saw to cut the compound angles. Unfortunately, I don't have one. My band saw doesn't cut straight enough to make these long cuts and can't handle compound angles. So if there is anyone that didn't do a quick build and is finished with their clamping block that would be interested in selling or loaning their clamping block for awhile, I would be very appreciative. My other alternative is to find somebody locally that may have a table saw that I could use to make the clamping block. Thanks, Bob Do not archive http://www.matronics.com/Navigator?RV10-List http://forums.matronics.com http://www.matronics.com/contribution ________________________________ Message 18 ____________________________________ Time: 03:14:58 PM PST US Subject: RV10-List: Re: 1st flight video N519PJ From: "woxofswa" Congratulations Deems, You are an inspiration. I had my wife come in and watch the triumphant door opening scene. Your airplane looks bristol. I hope to bop over soon to take a look at it. One comment that I have debated making, and I mean this without any malice or disrespect, but your videographer should try decaf and/or not quit the day job. Hope to see you at least at Copperstate if not sooner. -------- Myron Nelson Mesa, AZ Emp completed, legacy build fuse in progress Read this topic online here: http://forums.matronics.com/viewtopic.php?p=240176#240176 ________________________________ Message 19 ____________________________________ Time: 06:02:01 PM PST US From: "richard sipp" Subject: Re: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ Congratulations Deems! Tailwinds Dick Sipp N110DV 130 Hours ----- Original Message ----- From: "Deems Davis" Sent: Saturday, April 18, 2009 9:29 PM Subject: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ > > ......... And I held on for the ride :-) > > > What a ride !!!!!!!!!!!!!! > > > http://deemsrv10.com/album/First%20Flight%20APR%2018%202009/index.html > > > Deems Davis # 406 > 'Its all done.... !!!!!!!!!!!!!!!!!!!! > http://deemsrv10.com/ > > > > > ________________________________ Message 20 ____________________________________ Time: 06:13:21 PM PST US From: "Byron Gillespie" Subject: RE: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ Congrats Deems! We have all been watching for some time and share in the excitement with you. Byron N253RV Assigned - Still finishing.... -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Deems Davis Sent: Saturday, April 18, 2009 9:29 PM Subject: RV10-List: N519PJ Slipped the Surly Bonds of Earth............ ......... And I held on for the ride :-) What a ride !!!!!!!!!!!!!! http://deemsrv10.com/album/First%20Flight%20APR%2018%202009/index.html Deems Davis # 406 'Its all done.... !!!!!!!!!!!!!!!!!!!! http://deemsrv10.com/ ________________________________ Message 21 ____________________________________ Time: 09:04:33 PM PST US Subject: RV10-List: Re: N519PJ Slipped the Surly Bonds of Earth............ From: "AirMike" Way to go. Kuddos for tenacity. -------- OSH '08 or Bust (busted) be there in "09 Q/B Kit - FWF end game Read this topic online here: http://forums.matronics.com/viewtopic.php?p=240228#240228 ________________________________ Message 22 ____________________________________ Time: 10:29:56 PM PST US From: Scott Schmidt Subject: Re: RV10-List: 1st flight video N519PJ Great job Deems. Can't wait to see you at Oshkosh. Scott Schmidt scottmschmidt@yahoo.com ________________________________ From: Deems Davis Sent: Sunday, April 19, 2009 10:19:40 AM Subject: RV10-List: 1st flight video N519PJ I finally figured out (?) Youtube and posted a video of yesterdays 1st flight. http://www.youtube.com/watch?v=7f6bzUYZZgI Deems Davis # 406 'still grinning..........' http://deemsrv10.com/ ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.