Today's Message Index:
----------------------
1. 12:19 AM - Re: G900X AHRS & remote compass (McGANN, Ron)
2. 01:20 AM - Re: G900X AHRS & remote compass (Robin Marks)
3. 05:20 AM - Re: G900X AHRS & remote compass (gary)
4. 05:23 AM - Re: G900X AHRS & remote compass (linn)
5. 07:53 AM - Re: HID lights (jayb)
6. 08:23 AM - Re: Re: HID lights (David McNeill)
7. 08:54 AM - Re: G900X AHRS & remote compass (SteinAir, Inc.)
8. 08:54 AM - Re: Re: HID lights (Rob Kochman)
9. 08:54 AM - hid lights question (pilotdds@aol.com)
10. 09:26 AM - Stock Door Seals (Chris Johnston)
11. 09:44 AM - Re: G900X AHRS & remote compass (Tim Olson)
12. 10:30 AM - Re: hid lights question (David McNeill)
13. 10:59 AM - Re: HID lights (Planelights)
14. 11:26 AM - Re: Re: Bending Fuse Side Skins (Mike Schulz)
15. 01:23 PM - Dark Orange RV-10 (RobHickman@aol.com)
16. 01:38 PM - Re: Dark Orange RV-10 (RobHickman@aol.com)
17. 01:55 PM - David Bowman Please call re Seminar (Dave Saylor)
18. 02:50 PM - Re: Dark Orange RV-10 (John Cox)
19. 04:13 PM - Re: G900X AHRS & remote compass (Patrick Pulis)
20. 04:13 PM - Re: G900X AHRS & remote compass (Patrick Pulis)
21. 04:49 PM - Re: G900X AHRS & remote compass (gary)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | G900X AHRS & remote compass |
You know I reckon that may be the problem with my installation as well -
where do you get the stainless steel harness attach cables? (My
AHRS/Mag tray is in almost the same position).
Cheers,
Ron
Do not archive
________________________________
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Robin Marks
Sent: Wednesday, 6 May 2009 4:18 PM
Subject: RE: RV10-List: G900X AHRS & remote compass
Stainless Steel hardware.
Every problem has a solution, just add dollars.
If this was not S/S they definitely will interfere with the electronics.
You may still have to do the same. These are really sensitive devices.
Robin
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Chris and
Susie
Sent: Tuesday, May 05, 2009 10:49 PM
Subject: Re: RV10-List: G900X AHRS & remote compass
Robin my only concern would be the harness atach cables. We installed
our unit at the top of the baulkhead to get away from them
Chris
----- Original Message -----
From: Robin Marks <mailto:robin1@mrmoisture.com>
To: rv10-list@matronics.com
Sent: Wednesday, May 06, 2009 3:13 PM
Subject: RE: RV10-List: G900X AHRS & remote compass
Does this help?
Robin
http://www.matronics.com/Navigator?RV10-List
http://forums.matronics.com
http://www.matronics.com/contribution
Checked by AVG - www.avg.com
05/05/09 13:07:00
"Warning:
The information contained in this email and any attached files is
confidential to BAE Systems Australia. If you are not the intended
recipient, any use, disclosure or copying of this email or any
attachments is expressly prohibited. If you have received this email
in error, please notify us immediately. VIRUS: Every care has been
taken to ensure this email and its attachments are virus free,
however, any loss or damage incurred in using this email is not the
sender's responsibility. It is your responsibility to ensure virus
checks are completed before installing any data sent in this email to
your computer."
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | G900X AHRS & remote compass |
Ron,
I was going to suggest you look at that but I was not
following the thread that closely and didn't want to add my 2 cents when
it's not worth a penny. I knew long before the install that we were
going with S/S so we never had the stock units in place to see exactly
how the interference presented itself on the display. I suspect if you
just jiggle it while your avionics are on it may show you. If I recall
you had a slight turn anomaly in only one direction? If so I doubt it's
the harness cables. I assume (bad idea) that the changes would be back &
forth vs. only in one direction.
Can someone can suggest a supplier for Ron as I am on the
road (again) and don't have my records handy.
Robin
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of McGANN, Ron
Sent: Wednesday, May 06, 2009 12:18 AM
Subject: RE: RV10-List: G900X AHRS & remote compass
You know I reckon that may be the problem with my installation as well -
where do you get the stainless steel harness attach cables? (My
AHRS/Mag tray is in almost the same position).
Cheers,
Ron
Do not archive
________________________________
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Robin Marks
Sent: Wednesday, 6 May 2009 4:18 PM
Subject: RE: RV10-List: G900X AHRS & remote compass
Stainless Steel hardware.
Every problem has a solution, just add dollars.
If this was not S/S they definitely will interfere with the electronics.
You may still have to do the same. These are really sensitive devices.
Robin
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Chris and
Susie
Sent: Tuesday, May 05, 2009 10:49 PM
Subject: Re: RV10-List: G900X AHRS & remote compass
Robin my only concern would be the harness atach cables. We installed
our unit at the top of the baulkhead to get away from them
Chris
----- Original Message -----
From: Robin Marks <mailto:robin1@mrmoisture.com>
To: rv10-list@matronics.com
Sent: Wednesday, May 06, 2009 3:13 PM
Subject: RE: RV10-List: G900X AHRS & remote compass
Does this help?
Robin
http://www.matronics.com/Navigator?RV10-List
http://forums.matronics.com
http://www.matronics.com/contribution
Checked by AVG - www.avg.com
05/05/09 13:07:00
http://www.matronics.com/Navigator?RV10-List
http://forums.matronics.com
http://www.matronics.com/contribution
"Warning:
The information contained in this email and any attached files is
confidential to BAE Systems Australia. If you are not the intended
recipient, any use, disclosure or copying of this email or any
attachments is expressly prohibited. If you have received this email
in error, please notify us immediately. VIRUS: Every care has been
taken to ensure this email and its attachments are virus free,
however, any loss or damage incurred in using this email is not the
sender's responsibility. It is your responsibility to ensure virus
checks are completed before installing any data sent in this email to
your computer."
Checked by AVG - www.avg.com
05/05/09 13:07:00
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | G900X AHRS & remote compass |
I followed the recommendation from Garmin and put the AHRS on the mount from
Van and the Magnitromiter in the tail like they picture in the manual.
It works great
Gary Specketer
_____
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Dave Leikam
Sent: Thursday, June 04, 2009 10:46 PM
Subject: RV10-List: G900X AHRS & remote compass
Does anyone have pictures of where they installed the AHRS and remote
compass for a G900X system?
Dave Leikam
RV-10 #40496
N89DA (Reserved)
Muskego, WI
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: G900X AHRS & remote compass |
Nice picture! Thinking more about the electronic slip indicator .....
what's it do sitting still on the ground??? The other post about the
AHRS being out of cal makes sense. If it's accurate on the ground ....
or taxiing straight and out in flight I think points to a true slip.
Linn
Robin Marks wrote:
> Does this help?
>
>
>
> Robin
>
>
>
>
> ------------------------------------------------------------------------
>
>
> ------------------------------------------------------------------------
>
>
> Checked by AVG - www.avg.com
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
How did you mount your balasts? Photos?
Thanks,
Jay
[quote="dlm46007(at)cox.net"]Just in case the new builders have not considered
HID lights. See the difference on my 10.
http://www.planelights.com/index.php?id=661 (http://www.planelights.com/index.php?id=661)
> [b]
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=242921#242921
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
The install pictures are available on a click from the original link or
http://www.planelights.com/index.php?id=685
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of jayb
Sent: Wednesday, May 06, 2009 7:53 AM
Subject: RV10-List: Re: HID lights
How did you mount your balasts? Photos?
Thanks,
Jay
[quote="dlm46007(at)cox.net"]Just in case the new builders have not
considered HID lights. See the difference on my 10.
http://www.planelights.com/index.php?id=661
(http://www.planelights.com/index.php?id=661)
> [b]
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=242921#242921
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | G900X AHRS & remote compass |
The harness attach cables haven't really been a big problem in the RV-10's
with the G900X Remote Mag in that area, but the attach bolts usually are.
If either one of them causes an issue anyway, you can usually just degauss
it....at least that's been our experience with lots of these RV10's with
G900X's in them. Chris's solution isn't a bad one either, you just need to
make sure it's fairly robust as well.
Cheers,
Stein
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com]On Behalf Of Chris and Susie
Sent: Wednesday, May 06, 2009 12:49 AM
To: rv10-list@matronics.com
Subject: Re: RV10-List: G900X AHRS & remote compass
Robin my only concern would be the harness atach cables. We installed our
unit at the top of the baulkhead to get away from them
Chris
----- Original Message -----
From: Robin Marks
To: rv10-list@matronics.com
Sent: Wednesday, May 06, 2009 3:13 PM
Subject: RE: RV10-List: G900X AHRS & remote compass
Does this help?
Robin
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Here's what I did:
http://kochman.net/N819K/wp-content/uploads/2008/09/img_4685.jpg
On Wed, May 6, 2009 at 8:19 AM, David McNeill <dlm46007@cox.net> wrote:
>
>
> The install pictures are available on a click from the original link or
>
> http://www.planelights.com/index.php?id=685
>
>
> -----Original Message-----
> From: owner-rv10-list-server@matronics.com
> [mailto:owner-rv10-list-server@matronics.com] On Behalf Of jayb
> Sent: Wednesday, May 06, 2009 7:53 AM
> To: rv10-list@matronics.com
> Subject: RV10-List: Re: HID lights
>
>
> How did you mount your balasts? Photos?
>
> Thanks,
> Jay
>
>
> [quote="dlm46007(at)cox.net"]Just in case the new builders have not
> considered HID lights. See the difference on my 10.
>
> http://www.planelights.com/index.php?id=661
> (http://www.planelights.com/index.php?id=661)
>
> > [b]
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=242921#242921
>
>
--
Rob Kochman
RV-10 Wings
Woodinville, WA (near Seattle)
http://kochman.net/N819K
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | hid lights question |
With com and nav antenna in the wing tips has anyone using the hid lights noted
interference with nav,loc,gs or com?Thanks
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Stock Door Seals |
Hey all -
just a quick note for those who are wanting (trying!) to use the
stock door seals... others have reported that the new seals that are
being sent are tan in color, which is true. I had called Vans tech
support to get the straight skinny on whether there's a better way to
do door seals (answer: nope.) so I ordered a new one to replace the
one I beat up, and when I asked about the color, he checked, and
found that they had two grey seals left. I bought one, so there's
one lonely grey seal there if someone is interested. You'd have to
ask for it specifically, but as of 0900 Pacific, there's one available.
cj
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: G900X AHRS & remote compass |
Although mine isn't a G900X, the same theory applies and I
haven't seen a problem after the system is calibrated. You
can move the cables all you want and nothing changes. I
did use Brass hardware to mount the units though. But
used standard hardware on the cable ends. A good calibration
helps get rid of the iron effects on some systems.
Tim Olson - RV-10 N104CD
do not archive
SteinAir, Inc. wrote:
> The harness attach cables haven't really been a big problem in the
> RV-10's with the G900X Remote Mag in that area, but the attach bolts
> usually are. If either one of them causes an issue anyway, you can
> usually just degauss it....at least that's been our experience with lots
> of these RV10's with G900X's in them. Chris's solution isn't a bad one
> either, you just need to make sure it's fairly robust as well.
>
> Cheers,
> Stein
>
> -----Original Message-----
> *From:* owner-rv10-list-server@matronics.com
> [mailto:owner-rv10-list-server@matronics.com]*On Behalf Of* Chris
> and Susie
> *Sent:* Wednesday, May 06, 2009 12:49 AM
> *To:* rv10-list@matronics.com
> *Subject:* Re: RV10-List: G900X AHRS & remote compass
>
> Robin my only concern would be the harness atach cables. We
> installed our unit at the top of the baulkhead to get away from them
>
> Chris
>
> ----- Original Message -----
> *From:* Robin Marks <mailto:robin1@mrmoisture.com>
> *To:* rv10-list@matronics.com <mailto:rv10-list@matronics.com>
> *Sent:* Wednesday, May 06, 2009 3:13 PM
> *Subject:* RE: RV10-List: G900X AHRS & remote compass
>
> Does this help?
>
>
>
> Robin
>
>
>
> *
>
> href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List
> href="http://forums.matronics.com">http://forums.matronics.com
> href="http://www.matronics.com/contribution">http://www.matronics.com/c
> *
>
> *
>
>
> *
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | hid lights question |
none. Specs on emissions are available from the plane lights contact.
_____
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of pilotdds@aol.com
Sent: Wednesday, May 06, 2009 8:53 AM
Subject: RV10-List: hid lights question
With com and nav antenna in the wing tips has anyone using the hid lights
noted interference with nav,loc,gs or com?Thanks
_____
Shopping for Mom? Save
<http://shopping.aol.com/mothers-day-gifts-for-mom?ncid=emlweinstor00000003>
yourself a little time and money on AOL Shopping.
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Hi guys, Steve here from Planelights.
Power draw:
On any HID system you will have about a 10sec warm up. During that 10sec they
will be pulling about 7a(80w) @ 12v. After they are warmed up, they will pull
about 4.5a(54w) @ 12v. Your stock lights should have been 75w halogen bulbs,
the wiring should be adequate to handle the HID's.
These lights will work fine with a wig wag system. You will need to be able to
wire the lights to stay on for at least 1 minute prior to flashing. That allows
the xenon gas inside the bulb to stabilize prior to flashing.
If you look at our website you will see the RFI comparison charts. http://www.planelights.com/index.php?id=702 You will see that our ballast should not interfere with any Nav or Comm equipment. We have had a few people say that a strobe light causes more intercom interference than our lights.
Thanks
Steve
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=242940#242940
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Bending Fuse Side Skins |
Paul,
Glad to find someone that I can help. If you could give me a call we can get
them on the way.
Mike Schulz
Pro Fish Enterprises, LLC
4878 Edgewater Drive
Mound, MN 55364
612-590-8604
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Paul Ohman
Sent: Tuesday, May 05, 2009 6:43 PM
Subject: RV10-List: Re: Bending Fuse Side Skins
Great timing Mike, we are starting that section soon. I will take them. PM
sent
--------
Paul Ohman
40810
slow build wings
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=242846#242846
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Dark Orange RV-10 |
Does anyone have pictures of the dark Orange RV-10 that was for sale a few
months ago that they can email me?
Rob Hickman
N402RH RV-10
**************Big savings on Dell=99s most popular laptops. Now star
ting at
$449!
=http:%2F%2Fad.doubleclick.net%2Fclk%3B214663377%3B36502382%3Bh)
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Dark Orange RV-10 |
It also had a FLIR camera, not the tan and orange one.
Rob Hickman
N402RH
**************Big savings on Dell=99s most popular laptops. Now star
ting at
$449!
=http:%2F%2Fad.doubleclick.net%2Fclk%3B214663377%3B36502382%3Bh)
Message 17
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | David Bowman Please call re Seminar |
David Bowman,
Please give me a call about this weekend. I don't have contact info for
you, and would like to confirm a few things.
Thanks,
Dave Saylor
AirCrafters LLC
140 Aviation Way
Watsonville, CA
831-722-9141
831-750-0284 CL
www.AirCraftersLLC.com
Message 18
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Dark Orange RV-10 |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Message 19
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: G900X AHRS & remote compass |
Any pictures of each install please Gary?=0A=0ARegards=0A=0APatrick=0ASouth
Oz=0A=0ADo Not Archive=0A=0A=0A=0A=0A________________________________=0AFr
om: gary <speckter@comcast.net>=0ATo: rv10-list@matronics.com=0ASent: Wedne
sday, 6 May, 2009 9:45:44 PM=0ASubject: RE: RV10-List: G900X AHRS & remote
compass=0A=0A=0AI followed the recommendation from Garmin and put the AHRS
on the mount from Van and the Magnitromiter in the tail like they picture i
n the manual.=0A-=0AIt works great=0A-=0AGary Specketer=0A-=0A=0A____
____________________________=0A=0AFrom:owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Dave Leikam=0AS
ent: Thursday, June 04, 2009 10:46 PM=0ATo: RV-10 matronics=0ASubject: RV10
-List: G900X AHRS & remote compass=0A-=0ADoes anyone have pictures of whe
re they installed the AHRS and remote compass for a G900X system?=0A-=0AD
ave Leikam=0ARV-10 #40496=0AN89DA (Reserved)=0AMuskego , WI=0A -=0A -
=0Ahttp://www.matronics.com/Navigator?RV10-List=0Ahttp://forums.matronics.c
= =0A=0A=0A Enjoy a safer web experience. Upgrade to the new Inte
rnet Explorer 8 optimised for Yahoo!7. Get it now.
Message 20
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: G900X AHRS & remote compass |
Could try Hooker Harness?=0A=0ARegards=0A=0APat=0A=0A=0A=0A=0A_____________
___________________=0AFrom: Robin Marks <robin1@mrmoisture.com>=0ATo: rv10-
list@matronics.com=0ASent: Wednesday, 6 May, 2009 5:46:47 PM=0ASubject: RE:
RV10-List: G900X AHRS & remote compass=0A=0A=0ARon,=0A=C2-=C2-=C2-
=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2- I was going to suggest you
look at that but I was not following the thread that closely and didn
=99t want to add my 2 cents when it=99s not worth a penny. I knew
long before the install that we were going with S/S so we never had the sto
ck units in place to see exactly how the interference presented itself on t
he display. I suspect if you just jiggle it while your avionics are on it m
ay show you. If I recall you had a slight turn anomaly in only one directio
n? If so I doubt it=99s the harness cables. I assume (bad idea) that
the changes would be back & forth vs. only in one direction. =0A=C2-=C2
-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2- Can someone can s
uggest a supplier for Ron as I am on the road (again) and don=99t hav
e my records handy.=0ARobin=0A=C2-=0A=C2-=0AFrom:owner-rv10-list-server
@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of M
cGANN, Ron=0ASent: Wednesday, May 06, 2009 12:18 AM=0ATo: rv10-list@matroni
cs.com=0ASubject: RE: RV10-List: G900X AHRS & remote compass=0A=C2-=0AYou
know I reckon that may be the problem with my installation as well
=93 where do you get the stainless steel harness attach cables?=C2- (My A
HRS/Mag tray is in almost the same position).=0A=C2-=0ACheers,=0ARon=0A
=C2-=0ADo not archive=0A=0A________________________________=0A=0AFrom:own
er-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.
com] On Behalf Of Robin Marks=0ASent: Wednesday, 6 May 2009 4:18 PM=0ATo: r
v10-list@matronics.com=0ASubject: RE: RV10-List: G900X AHRS & remote compas
s=0A=C2-=0AStainless Steel hardware.=0AEvery problem has a solution, just
add dollars.=0AIf this was not S/S they definitely will interfere with the
electronics. You may still have to do the same. These are really sensitive
devices.=0A=C2-=0ARobin=0A=C2-=0AFrom:owner-rv10-list-server@matronics
.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Chris and S
usie=0ASent: Tuesday, May 05, 2009 10:49 PM=0ATo: rv10-list@matronics.com
=0ASubject: Re: RV10-List: G900X AHRS & remote compass=0A=C2-=0ARobin my
only concern would be the harness atach cables. We installed our unit at th
e top of the baulkhead to get away from them=0A=C2-=0AChris=0A----- Origi
nal Message ----- =0AFrom:Robin Marks =0ATo:rv10-list@matronics.com =0ASent
:Wednesday, May 06, 2009 3:13 PM=0ASubject:RE: RV10-List: G900X AHRS & remo
te compass=0A=C2-=0ADoes this help?=0A=C2-=0ARobin=0A=C2-=0A =C2-
=0A =C2-=0A =C2-=0Ahttp://www.matronics.com/Navigator?RV10-List=0A =C2
-=0Ahttp://forums.matronics.com=0A =C2-=0Ahttp://www.matronics.com/cont
hecked by AVG - www.avg.com=0A05/05/09 13:07:00=0A =C2-=0A =C2-=0A =C2
-=0Ahttp://www.matronics.com/Navigator?RV10-List=0A =C2-=0Ahttp://forum
s.matronics.com=0A =C2-=0Ahttp://www.matronics.com/contribution=0A =C2-
=0A =C2-=0A"Warning:=0AThe information contained in this email and any at
tached files is=0Aconfidential to BAE Systems Australia. If you are not the
intended=0Arecipient, any use, disclosure or copying of this email or any
=0Aattachments is expressly prohibited.=C2- If you have received this ema
il=0Ain error, please notify us immediately. VIRUS: Every care has been=0At
aken to ensure this email and its attachments are virus free,=0Ahowever, an
y loss or damage incurred in using this email is not the=0Asender's respons
ibility.=C2- It is your responsibility to ensure virus=0Achecks are compl
eted before installing any data sent in this email to=0Ayour computer."=0A
=C2-=0A =C2-=0A =C2-=0Ahttp://www.matronics.com/Navigator?RV10-List
=0Ahttp://forums.matronics.com=0Ahttp://www.matronics.com/contribution=0A
=========================0A
=0A=0A=0A Enjoy a safer web experience. Upgrade to the new Internet Ex
plorer 8 optimised for Yahoo!7. Get it now.
Message 21
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | G900X AHRS & remote compass |
No, but there are pix in the Garmin install manual. I could make copies and
send them snail mail or Stein probably could send you electronic copies.
Sorry
Gary Specketer
_____
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Patrick Pulis
Sent: Wednesday, May 06, 2009 6:13 PM
Subject: Re: RV10-List: G900X AHRS & remote compass
Any pictures of each install please Gary?
Regards
Patrick
South Oz
Do Not Archive
_____
From: gary <speckter@comcast.net>
Sent: Wednesday, 6 May, 2009 9:45:44 PM
Subject: RE: RV10-List: G900X AHRS & remote compass
I followed the recommendation from Garmin and put the AHRS on the mount from
Van and the Magnitromiter in the tail like they picture in the manual.
It works great
Gary Specketer
_____
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Dave Leikam
Sent: Thursday, June 04, 2009 10:46 PM
Subject: RV10-List: G900X AHRS & remote compass
Does anyone have pictures of where they installed the AHRS and remote
compass for a G900X system?
Dave Leikam
RV-10 #40496
N89DA (Reserved)
Muskego , WI
http://www.matronics.com/Navigator?RV10-List
http://forums.matronics.com
http://www.matronics.com/contribution
htt="http://forums.matronics.com/" target=_blank rel=nofollow>http://for
- List Contribution
://www.matronics.com/contribution" target=_blank
rel=nofollow>http://ww======================
_____
The new Internet Explorer 8 optimised for Yahoo!7: Faster, Safer, Easier.
Get it now.
<http://au.rd.yahoo.com/search/ie8/mailtagline/*http:/us.lrd.yahoo.com/_ylc
X3oDMTJxbnQwdTJhBF9zAzIxNDIwMjU2NTkEdG1fZG1lY2gDVGV4dCBMaW5rBHRtX2xuawNVMTEw
MzQ0OAR0bV9uZXQDWWFob28hBHRtX3BvcwN0YWdsaW5lBHRtX3BwdHkDYXVueg--/SIG=11k6t9t
1c/**http:/downloads.yahoo.com/au/internetexplorer/> .
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|