---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Wed 05/06/09: 21 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:19 AM - Re: G900X AHRS & remote compass (McGANN, Ron) 2. 01:20 AM - Re: G900X AHRS & remote compass (Robin Marks) 3. 05:20 AM - Re: G900X AHRS & remote compass (gary) 4. 05:23 AM - Re: G900X AHRS & remote compass (linn) 5. 07:53 AM - Re: HID lights (jayb) 6. 08:23 AM - Re: Re: HID lights (David McNeill) 7. 08:54 AM - Re: G900X AHRS & remote compass (SteinAir, Inc.) 8. 08:54 AM - Re: Re: HID lights (Rob Kochman) 9. 08:54 AM - hid lights question (pilotdds@aol.com) 10. 09:26 AM - Stock Door Seals (Chris Johnston) 11. 09:44 AM - Re: G900X AHRS & remote compass (Tim Olson) 12. 10:30 AM - Re: hid lights question (David McNeill) 13. 10:59 AM - Re: HID lights (Planelights) 14. 11:26 AM - Re: Re: Bending Fuse Side Skins (Mike Schulz) 15. 01:23 PM - Dark Orange RV-10 (RobHickman@aol.com) 16. 01:38 PM - Re: Dark Orange RV-10 (RobHickman@aol.com) 17. 01:55 PM - David Bowman Please call re Seminar (Dave Saylor) 18. 02:50 PM - Re: Dark Orange RV-10 (John Cox) 19. 04:13 PM - Re: G900X AHRS & remote compass (Patrick Pulis) 20. 04:13 PM - Re: G900X AHRS & remote compass (Patrick Pulis) 21. 04:49 PM - Re: G900X AHRS & remote compass (gary) ________________________________ Message 1 _____________________________________ Time: 12:19:26 AM PST US Subject: RE: RV10-List: G900X AHRS & remote compass From: "McGANN, Ron" You know I reckon that may be the problem with my installation as well - where do you get the stainless steel harness attach cables? (My AHRS/Mag tray is in almost the same position). Cheers, Ron Do not archive ________________________________ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Robin Marks Sent: Wednesday, 6 May 2009 4:18 PM Subject: RE: RV10-List: G900X AHRS & remote compass Stainless Steel hardware. Every problem has a solution, just add dollars. If this was not S/S they definitely will interfere with the electronics. You may still have to do the same. These are really sensitive devices. Robin From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Chris and Susie Sent: Tuesday, May 05, 2009 10:49 PM Subject: Re: RV10-List: G900X AHRS & remote compass Robin my only concern would be the harness atach cables. We installed our unit at the top of the baulkhead to get away from them Chris ----- Original Message ----- From: Robin Marks To: rv10-list@matronics.com Sent: Wednesday, May 06, 2009 3:13 PM Subject: RE: RV10-List: G900X AHRS & remote compass Does this help? Robin http://www.matronics.com/Navigator?RV10-List http://forums.matronics.com http://www.matronics.com/contribution Checked by AVG - www.avg.com 05/05/09 13:07:00 "Warning: The information contained in this email and any attached files is confidential to BAE Systems Australia. If you are not the intended recipient, any use, disclosure or copying of this email or any attachments is expressly prohibited. If you have received this email in error, please notify us immediately. VIRUS: Every care has been taken to ensure this email and its attachments are virus free, however, any loss or damage incurred in using this email is not the sender's responsibility. It is your responsibility to ensure virus checks are completed before installing any data sent in this email to your computer." ________________________________ Message 2 _____________________________________ Time: 01:20:04 AM PST US Subject: RE: RV10-List: G900X AHRS & remote compass From: "Robin Marks" Ron, I was going to suggest you look at that but I was not following the thread that closely and didn't want to add my 2 cents when it's not worth a penny. I knew long before the install that we were going with S/S so we never had the stock units in place to see exactly how the interference presented itself on the display. I suspect if you just jiggle it while your avionics are on it may show you. If I recall you had a slight turn anomaly in only one direction? If so I doubt it's the harness cables. I assume (bad idea) that the changes would be back & forth vs. only in one direction. Can someone can suggest a supplier for Ron as I am on the road (again) and don't have my records handy. Robin From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of McGANN, Ron Sent: Wednesday, May 06, 2009 12:18 AM Subject: RE: RV10-List: G900X AHRS & remote compass You know I reckon that may be the problem with my installation as well - where do you get the stainless steel harness attach cables? (My AHRS/Mag tray is in almost the same position). Cheers, Ron Do not archive ________________________________ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Robin Marks Sent: Wednesday, 6 May 2009 4:18 PM Subject: RE: RV10-List: G900X AHRS & remote compass Stainless Steel hardware. Every problem has a solution, just add dollars. If this was not S/S they definitely will interfere with the electronics. You may still have to do the same. These are really sensitive devices. Robin From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Chris and Susie Sent: Tuesday, May 05, 2009 10:49 PM Subject: Re: RV10-List: G900X AHRS & remote compass Robin my only concern would be the harness atach cables. We installed our unit at the top of the baulkhead to get away from them Chris ----- Original Message ----- From: Robin Marks To: rv10-list@matronics.com Sent: Wednesday, May 06, 2009 3:13 PM Subject: RE: RV10-List: G900X AHRS & remote compass Does this help? Robin http://www.matronics.com/Navigator?RV10-List http://forums.matronics.com http://www.matronics.com/contribution Checked by AVG - www.avg.com 05/05/09 13:07:00 http://www.matronics.com/Navigator?RV10-List http://forums.matronics.com http://www.matronics.com/contribution "Warning: The information contained in this email and any attached files is confidential to BAE Systems Australia. If you are not the intended recipient, any use, disclosure or copying of this email or any attachments is expressly prohibited. If you have received this email in error, please notify us immediately. VIRUS: Every care has been taken to ensure this email and its attachments are virus free, however, any loss or damage incurred in using this email is not the sender's responsibility. It is your responsibility to ensure virus checks are completed before installing any data sent in this email to your computer." Checked by AVG - www.avg.com 05/05/09 13:07:00 ________________________________ Message 3 _____________________________________ Time: 05:20:16 AM PST US From: "gary" Subject: RE: RV10-List: G900X AHRS & remote compass I followed the recommendation from Garmin and put the AHRS on the mount from Van and the Magnitromiter in the tail like they picture in the manual. It works great Gary Specketer _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Dave Leikam Sent: Thursday, June 04, 2009 10:46 PM Subject: RV10-List: G900X AHRS & remote compass Does anyone have pictures of where they installed the AHRS and remote compass for a G900X system? Dave Leikam RV-10 #40496 N89DA (Reserved) Muskego, WI ________________________________ Message 4 _____________________________________ Time: 05:23:57 AM PST US From: linn Subject: Re: RV10-List: G900X AHRS & remote compass Nice picture! Thinking more about the electronic slip indicator ..... what's it do sitting still on the ground??? The other post about the AHRS being out of cal makes sense. If it's accurate on the ground .... or taxiing straight and out in flight I think points to a true slip. Linn Robin Marks wrote: > Does this help? > > > > Robin > > > > > ------------------------------------------------------------------------ > > > ------------------------------------------------------------------------ > > > Checked by AVG - www.avg.com > ________________________________ Message 5 _____________________________________ Time: 07:53:31 AM PST US Subject: RV10-List: Re: HID lights From: "jayb" How did you mount your balasts? Photos? Thanks, Jay [quote="dlm46007(at)cox.net"]Just in case the new builders have not considered HID lights. See the difference on my 10. http://www.planelights.com/index.php?id=661 (http://www.planelights.com/index.php?id=661) > [b] Read this topic online here: http://forums.matronics.com/viewtopic.php?p=242921#242921 ________________________________ Message 6 _____________________________________ Time: 08:23:27 AM PST US From: "David McNeill" Subject: RE: RV10-List: Re: HID lights The install pictures are available on a click from the original link or http://www.planelights.com/index.php?id=685 -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of jayb Sent: Wednesday, May 06, 2009 7:53 AM Subject: RV10-List: Re: HID lights How did you mount your balasts? Photos? Thanks, Jay [quote="dlm46007(at)cox.net"]Just in case the new builders have not considered HID lights. See the difference on my 10. http://www.planelights.com/index.php?id=661 (http://www.planelights.com/index.php?id=661) > [b] Read this topic online here: http://forums.matronics.com/viewtopic.php?p=242921#242921 ________________________________ Message 7 _____________________________________ Time: 08:54:55 AM PST US From: "SteinAir, Inc." Subject: RE: RV10-List: G900X AHRS & remote compass The harness attach cables haven't really been a big problem in the RV-10's with the G900X Remote Mag in that area, but the attach bolts usually are. If either one of them causes an issue anyway, you can usually just degauss it....at least that's been our experience with lots of these RV10's with G900X's in them. Chris's solution isn't a bad one either, you just need to make sure it's fairly robust as well. Cheers, Stein -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com]On Behalf Of Chris and Susie Sent: Wednesday, May 06, 2009 12:49 AM To: rv10-list@matronics.com Subject: Re: RV10-List: G900X AHRS & remote compass Robin my only concern would be the harness atach cables. We installed our unit at the top of the baulkhead to get away from them Chris ----- Original Message ----- From: Robin Marks To: rv10-list@matronics.com Sent: Wednesday, May 06, 2009 3:13 PM Subject: RE: RV10-List: G900X AHRS & remote compass Does this help? Robin ________________________________ Message 8 _____________________________________ Time: 08:54:55 AM PST US Subject: Re: RV10-List: Re: HID lights From: Rob Kochman Here's what I did: http://kochman.net/N819K/wp-content/uploads/2008/09/img_4685.jpg On Wed, May 6, 2009 at 8:19 AM, David McNeill wrote: > > > The install pictures are available on a click from the original link or > > http://www.planelights.com/index.php?id=685 > > > -----Original Message----- > From: owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] On Behalf Of jayb > Sent: Wednesday, May 06, 2009 7:53 AM > To: rv10-list@matronics.com > Subject: RV10-List: Re: HID lights > > > How did you mount your balasts? Photos? > > Thanks, > Jay > > > [quote="dlm46007(at)cox.net"]Just in case the new builders have not > considered HID lights. See the difference on my 10. > > http://www.planelights.com/index.php?id=661 > (http://www.planelights.com/index.php?id=661) > > > [b] > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=242921#242921 > > -- Rob Kochman RV-10 Wings Woodinville, WA (near Seattle) http://kochman.net/N819K ________________________________ Message 9 _____________________________________ Time: 08:54:55 AM PST US Subject: RV10-List: hid lights question From: pilotdds@aol.com With com and nav antenna in the wing tips has anyone using the hid lights noted interference with nav,loc,gs or com?Thanks ________________________________ Message 10 ____________________________________ Time: 09:26:26 AM PST US From: Chris Johnston Subject: RV10-List: Stock Door Seals Hey all - just a quick note for those who are wanting (trying!) to use the stock door seals... others have reported that the new seals that are being sent are tan in color, which is true. I had called Vans tech support to get the straight skinny on whether there's a better way to do door seals (answer: nope.) so I ordered a new one to replace the one I beat up, and when I asked about the color, he checked, and found that they had two grey seals left. I bought one, so there's one lonely grey seal there if someone is interested. You'd have to ask for it specifically, but as of 0900 Pacific, there's one available. cj ________________________________ Message 11 ____________________________________ Time: 09:44:01 AM PST US From: Tim Olson Subject: Re: RV10-List: G900X AHRS & remote compass Although mine isn't a G900X, the same theory applies and I haven't seen a problem after the system is calibrated. You can move the cables all you want and nothing changes. I did use Brass hardware to mount the units though. But used standard hardware on the cable ends. A good calibration helps get rid of the iron effects on some systems. Tim Olson - RV-10 N104CD do not archive SteinAir, Inc. wrote: > The harness attach cables haven't really been a big problem in the > RV-10's with the G900X Remote Mag in that area, but the attach bolts > usually are. If either one of them causes an issue anyway, you can > usually just degauss it....at least that's been our experience with lots > of these RV10's with G900X's in them. Chris's solution isn't a bad one > either, you just need to make sure it's fairly robust as well. > > Cheers, > Stein > > -----Original Message----- > *From:* owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com]*On Behalf Of* Chris > and Susie > *Sent:* Wednesday, May 06, 2009 12:49 AM > *To:* rv10-list@matronics.com > *Subject:* Re: RV10-List: G900X AHRS & remote compass > > Robin my only concern would be the harness atach cables. We > installed our unit at the top of the baulkhead to get away from them > > Chris > > ----- Original Message ----- > *From:* Robin Marks > *To:* rv10-list@matronics.com > *Sent:* Wednesday, May 06, 2009 3:13 PM > *Subject:* RE: RV10-List: G900X AHRS & remote compass > > Does this help? > > > > Robin > > > > * > > href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List > href="http://forums.matronics.com">http://forums.matronics.com > href="http://www.matronics.com/contribution">http://www.matronics.com/c > * > > * > > > * ________________________________ Message 12 ____________________________________ Time: 10:30:29 AM PST US From: "David McNeill" Subject: RE: RV10-List: hid lights question none. Specs on emissions are available from the plane lights contact. _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of pilotdds@aol.com Sent: Wednesday, May 06, 2009 8:53 AM Subject: RV10-List: hid lights question With com and nav antenna in the wing tips has anyone using the hid lights noted interference with nav,loc,gs or com?Thanks _____ Shopping for Mom? Save yourself a little time and money on AOL Shopping. ________________________________ Message 13 ____________________________________ Time: 10:59:11 AM PST US Subject: RV10-List: Re: HID lights From: "Planelights" Hi guys, Steve here from Planelights. Power draw: On any HID system you will have about a 10sec warm up. During that 10sec they will be pulling about 7a(80w) @ 12v. After they are warmed up, they will pull about 4.5a(54w) @ 12v. Your stock lights should have been 75w halogen bulbs, the wiring should be adequate to handle the HID's. These lights will work fine with a wig wag system. You will need to be able to wire the lights to stay on for at least 1 minute prior to flashing. That allows the xenon gas inside the bulb to stabilize prior to flashing. If you look at our website you will see the RFI comparison charts. http://www.planelights.com/index.php?id=702 You will see that our ballast should not interfere with any Nav or Comm equipment. We have had a few people say that a strobe light causes more intercom interference than our lights. Thanks Steve Read this topic online here: http://forums.matronics.com/viewtopic.php?p=242940#242940 ________________________________ Message 14 ____________________________________ Time: 11:26:37 AM PST US From: "Mike Schulz" Subject: RE: RV10-List: Re: Bending Fuse Side Skins Paul, Glad to find someone that I can help. If you could give me a call we can get them on the way. Mike Schulz Pro Fish Enterprises, LLC 4878 Edgewater Drive Mound, MN 55364 612-590-8604 -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Paul Ohman Sent: Tuesday, May 05, 2009 6:43 PM Subject: RV10-List: Re: Bending Fuse Side Skins Great timing Mike, we are starting that section soon. I will take them. PM sent -------- Paul Ohman 40810 slow build wings Read this topic online here: http://forums.matronics.com/viewtopic.php?p=242846#242846 ________________________________ Message 15 ____________________________________ Time: 01:23:59 PM PST US From: RobHickman@aol.com Subject: RV10-List: Dark Orange RV-10 Does anyone have pictures of the dark Orange RV-10 that was for sale a few months ago that they can email me? Rob Hickman N402RH RV-10 **************Big savings on Dell=99s most popular laptops. Now star ting at $449! =http:%2F%2Fad.doubleclick.net%2Fclk%3B214663377%3B36502382%3Bh) ________________________________ Message 16 ____________________________________ Time: 01:38:53 PM PST US From: RobHickman@aol.com Subject: Re: RV10-List: Dark Orange RV-10 It also had a FLIR camera, not the tan and orange one. Rob Hickman N402RH **************Big savings on Dell=99s most popular laptops. Now star ting at $449! =http:%2F%2Fad.doubleclick.net%2Fclk%3B214663377%3B36502382%3Bh) ________________________________ Message 17 ____________________________________ Time: 01:55:47 PM PST US From: "Dave Saylor" Subject: RV10-List: David Bowman Please call re Seminar David Bowman, Please give me a call about this weekend. I don't have contact info for you, and would like to confirm a few things. Thanks, Dave Saylor AirCrafters LLC 140 Aviation Way Watsonville, CA 831-722-9141 831-750-0284 CL www.AirCraftersLLC.com ________________________________ Message 18 ____________________________________ Time: 02:50:41 PM PST US Subject: RE: RV10-List: Dark Orange RV-10 From: "John Cox" V2FzIHRoaXMgd2hhdCB5b3Ugd2FudGVkPw0KDQogDQoNCkpvaG4NCg0KIA0KDQpGcm9tOiBvd25l ci1ydjEwLWxpc3Qtc2VydmVyQG1hdHJvbmljcy5jb20gW21haWx0bzpvd25lci1ydjEwLWxpc3Qt c2VydmVyQG1hdHJvbmljcy5jb21dIE9uIEJlaGFsZiBPZiBSb2JIaWNrbWFuQGFvbC5jb20NClNl bnQ6IFdlZG5lc2RheSwgTWF5IDA2LCAyMDA5IDE6MjIgUE0NClRvOiBydjEwLWxpc3RAbWF0cm9u aWNzLmNvbQ0KU3ViamVjdDogUlYxMC1MaXN0OiBEYXJrIE9yYW5nZSBSVi0xMA0KDQogDQoNCkRv ZXMgYW55b25lIGhhdmUgcGljdHVyZXMgb2YgdGhlIGRhcmsgT3JhbmdlIFJWLTEwIHRoYXQgd2Fz IGZvciBzYWxlIGEgZmV3IG1vbnRocyBhZ28gdGhhdCB0aGV5IGNhbiBlbWFpbCBtZT8NCg0KIA0K DQogDQoNClJvYiBIaWNrbWFuDQoNCk40MDJSSCBSVi0xMA0KDQogDQoNCl9fX19fX19fX19fX19f X19fX19fX19fX19fX19fX19fDQoNCkJpZyBzYXZpbmdzIG9uIERlbGwncyBtb3N0IHBvcHVsYXIg bGFwdG9wcy4gTm93IHN0YXJ0aW5nIGF0ICQ0NDkhIDxodHRwOi8vcHIuYXR3b2xhLmNvbS9wcm9t b2Nsay8xMDAxMjY1NzV4MTIyMTgyNzUxMHgxMjAxMzk5MDkwL2FvbD9yZWRpcj1odHRwOiUyRiUy RmFkLmRvdWJsZWNsaWNrLm5ldCUyRmNsayUzQjIxNDY2MzM3NyUzQjM2NTAyMzgyJTNCaD4gDQoN CiANCiANCl8tPT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09 PT09PT09PT09PT09DQpfLT0gICAgICAgICAgLSBUaGUgUlYxMC1MaXN0IEVtYWlsIEZvcnVtIC0N Cl8tPSBVc2UgdGhlIE1hdHJvbmljcyBMaXN0IEZlYXR1cmVzIE5hdmlnYXRvciB0byBicm93c2UN Cl8tPSB0aGUgbWFueSBMaXN0IHV0aWxpdGllcyBzdWNoIGFzIExpc3QgVW4vU3Vic2NyaXB0aW9u LA0KXy09IEFyY2hpdmUgU2VhcmNoICYgRG93bmxvYWQsIDctRGF5IEJyb3dzZSwgQ2hhdCwgRkFR LA0KXy09IFBob3Rvc2hhcmUsIGFuZCBtdWNoIG11Y2ggbW9yZToNCl8tPQ0KXy09ICAgLS0+IGh0 dHA6Ly93d3cubWF0cm9uaWNzLmNvbS9OYXZpZ2F0b3I/UlYxMC1MaXN0DQpfLT0NCl8tPT09PT09 PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09DQpf LT0gICAgICAgICAgICAgICAtIE1BVFJPTklDUyBXRUIgRk9SVU1TIC0NCl8tPSBTYW1lIGdyZWF0 IGNvbnRlbnQgYWxzbyBhdmFpbGFibGUgdmlhIHRoZSBXZWIgRm9ydW1zIQ0KXy09DQpfLT0gICAt LT4gaHR0cDovL2ZvcnVtcy5tYXRyb25pY3MuY29tDQpfLT0NCl8tPT09PT09PT09PT09PT09PT09 PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09DQpfLT0gICAgICAgICAg ICAgLSBMaXN0IENvbnRyaWJ1dGlvbiBXZWIgU2l0ZSAtDQpfLT0gIFRoYW5rIHlvdSBmb3IgeW91 ciBnZW5lcm91cyBzdXBwb3J0IQ0KXy09ICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgLU1h dHQgRHJhbGxlLCBMaXN0IEFkbWluLg0KXy09ICAgLS0+IGh0dHA6Ly93d3cubWF0cm9uaWNzLmNv bS9jb250cmlidXRpb24NCl8tPT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09 PT09PT09PT09PT09PT09PT09PT09DQogDQo ________________________________ Message 19 ____________________________________ Time: 04:13:31 PM PST US From: Patrick Pulis Subject: Re: RV10-List: G900X AHRS & remote compass Any pictures of each install please Gary?=0A=0ARegards=0A=0APatrick=0ASouth Oz=0A=0ADo Not Archive=0A=0A=0A=0A=0A________________________________=0AFr om: gary =0ATo: rv10-list@matronics.com=0ASent: Wedne sday, 6 May, 2009 9:45:44 PM=0ASubject: RE: RV10-List: G900X AHRS & remote compass=0A=0A=0AI followed the recommendation from Garmin and put the AHRS on the mount from Van and the Magnitromiter in the tail like they picture i n the manual.=0A-=0AIt works great=0A-=0AGary Specketer=0A-=0A=0A____ ____________________________=0A=0AFrom:owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Dave Leikam=0AS ent: Thursday, June 04, 2009 10:46 PM=0ATo: RV-10 matronics=0ASubject: RV10 -List: G900X AHRS & remote compass=0A-=0ADoes anyone have pictures of whe re they installed the AHRS and remote compass for a G900X system?=0A-=0AD ave Leikam=0ARV-10 #40496=0AN89DA (Reserved)=0AMuskego , WI=0A -=0A - =0Ahttp://www.matronics.com/Navigator?RV10-List=0Ahttp://forums.matronics.c = =0A=0A=0A Enjoy a safer web experience. Upgrade to the new Inte rnet Explorer 8 optimised for Yahoo!7. Get it now. ________________________________ Message 20 ____________________________________ Time: 04:13:31 PM PST US From: Patrick Pulis Subject: Re: RV10-List: G900X AHRS & remote compass Could try Hooker Harness?=0A=0ARegards=0A=0APat=0A=0A=0A=0A=0A_____________ ___________________=0AFrom: Robin Marks =0ATo: rv10- list@matronics.com=0ASent: Wednesday, 6 May, 2009 5:46:47 PM=0ASubject: RE: RV10-List: G900X AHRS & remote compass=0A=0A=0ARon,=0A=C2-=C2-=C2- =C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2- I was going to suggest you look at that but I was not following the thread that closely and didn =99t want to add my 2 cents when it=99s not worth a penny. I knew long before the install that we were going with S/S so we never had the sto ck units in place to see exactly how the interference presented itself on t he display. I suspect if you just jiggle it while your avionics are on it m ay show you. If I recall you had a slight turn anomaly in only one directio n? If so I doubt it=99s the harness cables. I assume (bad idea) that the changes would be back & forth vs. only in one direction. =0A=C2-=C2 -=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2- Can someone can s uggest a supplier for Ron as I am on the road (again) and don=99t hav e my records handy.=0ARobin=0A=C2-=0A=C2-=0AFrom:owner-rv10-list-server @matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of M cGANN, Ron=0ASent: Wednesday, May 06, 2009 12:18 AM=0ATo: rv10-list@matroni cs.com=0ASubject: RE: RV10-List: G900X AHRS & remote compass=0A=C2-=0AYou know I reckon that may be the problem with my installation as well =93 where do you get the stainless steel harness attach cables?=C2- (My A HRS/Mag tray is in almost the same position).=0A=C2-=0ACheers,=0ARon=0A =C2-=0ADo not archive=0A=0A________________________________=0A=0AFrom:own er-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics. com] On Behalf Of Robin Marks=0ASent: Wednesday, 6 May 2009 4:18 PM=0ATo: r v10-list@matronics.com=0ASubject: RE: RV10-List: G900X AHRS & remote compas s=0A=C2-=0AStainless Steel hardware.=0AEvery problem has a solution, just add dollars.=0AIf this was not S/S they definitely will interfere with the electronics. You may still have to do the same. These are really sensitive devices.=0A=C2-=0ARobin=0A=C2-=0AFrom:owner-rv10-list-server@matronics .com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Chris and S usie=0ASent: Tuesday, May 05, 2009 10:49 PM=0ATo: rv10-list@matronics.com =0ASubject: Re: RV10-List: G900X AHRS & remote compass=0A=C2-=0ARobin my only concern would be the harness atach cables. We installed our unit at th e top of the baulkhead to get away from them=0A=C2-=0AChris=0A----- Origi nal Message ----- =0AFrom:Robin Marks =0ATo:rv10-list@matronics.com =0ASent :Wednesday, May 06, 2009 3:13 PM=0ASubject:RE: RV10-List: G900X AHRS & remo te compass=0A=C2-=0ADoes this help?=0A=C2-=0ARobin=0A=C2-=0A =C2- =0A =C2-=0A =C2-=0Ahttp://www.matronics.com/Navigator?RV10-List=0A =C2 -=0Ahttp://forums.matronics.com=0A =C2-=0Ahttp://www.matronics.com/cont hecked by AVG - www.avg.com=0A05/05/09 13:07:00=0A =C2-=0A =C2-=0A =C2 -=0Ahttp://www.matronics.com/Navigator?RV10-List=0A =C2-=0Ahttp://forum s.matronics.com=0A =C2-=0Ahttp://www.matronics.com/contribution=0A =C2- =0A =C2-=0A"Warning:=0AThe information contained in this email and any at tached files is=0Aconfidential to BAE Systems Australia. If you are not the intended=0Arecipient, any use, disclosure or copying of this email or any =0Aattachments is expressly prohibited.=C2- If you have received this ema il=0Ain error, please notify us immediately. VIRUS: Every care has been=0At aken to ensure this email and its attachments are virus free,=0Ahowever, an y loss or damage incurred in using this email is not the=0Asender's respons ibility.=C2- It is your responsibility to ensure virus=0Achecks are compl eted before installing any data sent in this email to=0Ayour computer."=0A =C2-=0A =C2-=0A =C2-=0Ahttp://www.matronics.com/Navigator?RV10-List =0Ahttp://forums.matronics.com=0Ahttp://www.matronics.com/contribution=0A =========================0A =0A=0A=0A Enjoy a safer web experience. Upgrade to the new Internet Ex plorer 8 optimised for Yahoo!7. Get it now. ________________________________ Message 21 ____________________________________ Time: 04:49:54 PM PST US From: "gary" Subject: RE: RV10-List: G900X AHRS & remote compass No, but there are pix in the Garmin install manual. I could make copies and send them snail mail or Stein probably could send you electronic copies. Sorry Gary Specketer _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Patrick Pulis Sent: Wednesday, May 06, 2009 6:13 PM Subject: Re: RV10-List: G900X AHRS & remote compass Any pictures of each install please Gary? Regards Patrick South Oz Do Not Archive _____ From: gary Sent: Wednesday, 6 May, 2009 9:45:44 PM Subject: RE: RV10-List: G900X AHRS & remote compass I followed the recommendation from Garmin and put the AHRS on the mount from Van and the Magnitromiter in the tail like they picture in the manual. It works great Gary Specketer _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Dave Leikam Sent: Thursday, June 04, 2009 10:46 PM Subject: RV10-List: G900X AHRS & remote compass Does anyone have pictures of where they installed the AHRS and remote compass for a G900X system? Dave Leikam RV-10 #40496 N89DA (Reserved) Muskego , WI http://www.matronics.com/Navigator?RV10-List http://forums.matronics.com http://www.matronics.com/contribution htt="http://forums.matronics.com/" target=_blank rel=nofollow>http://for - List Contribution ://www.matronics.com/contribution" target=_blank rel=nofollow>http://ww====================== _____ The new Internet Explorer 8 optimised for Yahoo!7: Faster, Safer, Easier. Get it now. . ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.