---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Fri 05/22/09: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:42 AM - Re: IO-540 Available (Jay Wik) 2. 04:39 PM - Comm 2 volume Very low (Deems Davis) 3. 05:10 PM - Re: Comm 2 volume Very low (ricksked@embarqmail.com) 4. 07:17 PM - Re: Comm 2 volume Very low (Benjamin Krotje) ________________________________ Message 1 _____________________________________ Time: 09:42:45 AM PST US Subject: Re: RV10-List: IO-540 Available From: Jay Wik Tom Thanks for calling this morning This linkwill take you to an article about sump and engine mount clearance with the RV-10. There is also a link embeddedhttp:// www.aviationstop.com/2009/01/lycoming-oil-sump-clearance-on-rv-10.html in the article that takes you to a related Van's service bulletin. Unfortunately they don't provide specific dimensions, just that the dimensions that relate to the engine that Van's sells will work. Thanks - Jay On Wed, May 20, 2009 at 3:13 PM, wrote: > > No problem. The alternators are BnC, mags are Slick, the pg is set for a > Hartzell prop. I'll have to check tomorrow on the oil cooler and > exhaust. > > The New Firewall Forward had the Workmanship warranty for the inpection. > Cylinders "may" be covered by Lycoming. > > I'll find out more tomorrow. > > Tom > > On Wed, 20 May 2009 15:51:58 -0400 "Bob Leffler" > writes: > > > > Sorry about the noise, I meant to send this privately. > > > > -----Original Message----- > > From: owner-rv10-list-server@matronics.com > > [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bob > > Leffler > > Sent: Wednesday, May 20, 2009 3:28 PM > > To: rv10-list@matronics.com > > Subject: RE: RV10-List: IO-540 Available > > > > > > > > "It has two new alternators, prop governor, oil cooler, starter, and > > mags." > > Who are the vendors and models for these accessories? > > > > Also, whose exhaust is mounted? > > > > What is the warranty and from whom? > > > > Thanks, > > > > bob > > > > > > > > > > > > > > > > > > > > ____________________________________________________________ > Click here to find the right business program for you and take your career > to the next level. > > http://thirdpartyoffers.juno.com/TGL2141/fc/BLSrjpTESURI5kQ8feL2wHaIOiXntOkT6PpWsl2B5ECdELR6HFSy0gxfhWQ/ > > ________________________________ Message 2 _____________________________________ Time: 04:39:50 PM PST US From: Deems Davis Subject: RV10-List: Comm 2 volume Very low My Com2 Garmin SL40 which is connected through a Garmin 340 audio panel produces only a fraction of the volume, that the Com1 SL 30 does. I've been through the manuals looking for a clue as to where to begin. The audio panel states that the volume is controlled by the volume control on the radios. The Comm2 Vol is at max level. Anybody got suggestions on where to look? THANKS Deems Davis ________________________________ Message 3 _____________________________________ Time: 05:10:31 PM PST US Subject: Re: RV10-List: Comm 2 volume Very low From: ricksked@embarqmail.com Deems, Check to see if your audio in/out are reversed... Rick S N246RS ------Original Message------ From: Deems Davis Sender: owner-rv10-list-server@matronics.com ReplyTo: Rv Sent: May 22, 2009 4:38 PM Subject: RV10-List: Comm 2 volume Very low My Com2 Garmin SL40 which is connected through a Garmin 340 audio panel produces only a fraction of the volume, that the Com1 SL 30 does. I've been through the manuals looking for a clue as to where to begin. The audio panel states that the volume is controlled by the volume control on the radios. The Comm2 Vol is at max level. Anybody got suggestions on where to look? THANKS Deems Davis Sent via BlackBerry by AT&T ________________________________ Message 4 _____________________________________ Time: 07:17:49 PM PST US From: Benjamin Krotje Subject: Re: RV10-List: Comm 2 volume Very low is your volume level set at a fixed value instead of the variable setting? turn of the radio and press and hold the-mem button(i think)-and turn i t on and then change the values to variable --- On Fri, 5/22/09, Deems Davis wrote: From: Deems Davis Subject: RV10-List: Comm 2 volume Very low My Com2 Garmin SL40 which is connected through a Garmin 340 audio panel pro duces only a fraction of the volume, that the Com1 SL 30 does.- I've been through the manuals looking for a clue as to where to begin. The audio pan el states that the volume is controlled by the volume control on the radios . The Comm2 Vol is at max level. Anybody got suggestions on where to look? THANKS Deems Davis le, List Admin. =0A=0A=0A ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.