---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Tue 06/09/09: 16 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:35 AM - Towbar mod (Jesse Saint) 2. 11:45 AM - rear seat crotch strap attachment (Bob Turner) 3. 12:10 PM - Re: rear seat crotch strap attachment (Danny Riggs) 4. 12:10 PM - Re: rear seat crotch strap attachment (ricksked@embarqmail.com) 5. 12:21 PM - Re: rear seat crotch strap attachment (David Saylor) 6. 12:22 PM - Re: rear seat crotch strap attachment (Chuck Weyant) 7. 12:42 PM - Re: rear seat crotch strap attachment (Tim Olson) 8. 02:05 PM - Re: How do you change the VFR code on the Garmin GTX 330 (Michael Wellenzohn) 9. 07:31 PM - Re: Sam James Cowl (Lenny Iszak) 10. 09:23 PM - Re: Re: Sam James Cowl (Robin Marks) 11. 09:27 PM - First Flight (partner14) 12. 09:40 PM - Re: Re: Sam James Cowl (Dave Leikam) 13. 09:48 PM - Re: First Flight (Les Kearney) 14. 09:48 PM - Re: First Flight (Patrick Pulis) 15. 10:09 PM - Re: First Flight (McGann, Ron) 16. 11:37 PM - Re: First Flight (Chris and Susie) ________________________________ Message 1 _____________________________________ Time: 07:35:13 AM PST US From: Jesse Saint Subject: RV10-List: Towbar mod Jesse Saint Saint Aviation jesse@saintaviation.com 352-427-0285 Sent from my iPhone ________________________________ Message 2 _____________________________________ Time: 11:45:52 AM PST US Subject: RV10-List: rear seat crotch strap attachment From: "Bob Turner" My QB came with the rear seat crotch strap attachment installed. Does anyone use this? Any reason not to remove it? (I keep kneeling on it, and it hurts!) -------- Bob Turner RV-10 QB Read this topic online here: http://forums.matronics.com/viewtopic.php?p=247452#247452 ________________________________ Message 3 _____________________________________ Time: 12:10:40 PM PST US From: Danny Riggs Subject: RE: RV10-List: rear seat crotch strap attachment The discussions i've seen make it appear that most folks cut it off. I'm at the same stage in building and I'm really tired of sitting on it! One of t hese days I'll get agrivated enough to whack it off > Subject: RV10-List: rear seat crotch strap attachment > From: bobturner@alum.rpi.edu > Date: Tue=2C 9 Jun 2009 11:44:40 -0700 > To: rv10-list@matronics.com > > > My QB came with the rear seat crotch strap attachment installed. Does any one use this? Any reason not to remove it? (I keep kneeling on it=2C and it hurts!) > > -------- > Bob Turner > RV-10 QB > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=247452#247452 > > > > > > > =========== =========== =========== =========== > > > _________________________________________________________________ Windows Live=99: Keep your life in sync. http://windowslive.com/explore?ocid=TXT_TAGLM_WL_BR_life_in_synch_062009 ________________________________ Message 4 _____________________________________ Time: 12:10:41 PM PST US Subject: Re: RV10-List: rear seat crotch strap attachment From: ricksked@embarqmail.com I cut mine out...most have I think Rick Sked N246RS Final assembly ------Original Message------ From: Bob Turner Sender: owner-rv10-list-server@matronics.com ReplyTo: Rv Sent: Jun 9, 2009 11:44 AM Subject: RV10-List: rear seat crotch strap attachment My QB came with the rear seat crotch strap attachment installed. Does anyone use this? Any reason not to remove it? (I keep kneeling on it, and it hurts!) -------- Bob Turner RV-10 QB Read this topic online here: http://forums.matronics.com/viewtopic.php?p=247452#247452 Sent via BlackBerry by AT&T ________________________________ Message 5 _____________________________________ Time: 12:21:33 PM PST US Subject: Re: RV10-List: rear seat crotch strap attachment From: David Saylor I kept mine. They aren't that big a deal once you start flying. Dave On Tue, Jun 9, 2009 at 11:44 AM, Bob Turner wrote: > > My QB came with the rear seat crotch strap attachment installed. Does > anyone use this? Any reason not to remove it? (I keep kneeling on it, and it > hurts!) > > -------- > Bob Turner > RV-10 QB > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=247452#247452 > > -- Dave Saylor AirCrafters LLC 140 Aviation Way Watsonville, CA 95076 831-722-9141 Shop 831-750-0284 Cell ________________________________ Message 6 _____________________________________ Time: 12:22:04 PM PST US From: "Chuck Weyant" Subject: Re: RV10-List: rear seat crotch strap attachment If I remember correctly, I drilled out the rivets and saved the brackets. > I cut mine out...most have I think > > Rick Sked > N246RS > Final assembly > ------Original Message------ > From: Bob Turner > Sender: owner-rv10-list-server@matronics.com > To: Rv > ReplyTo: Rv > Sent: Jun 9, 2009 11:44 AM > Subject: RV10-List: rear seat crotch strap attachment > > > My QB came with the rear seat crotch strap attachment installed. Does > anyone use this? Any reason not to remove it? (I keep kneeling on it, and > it hurts!) > > -------- > Bob Turner > RV-10 QB ________________________________ Message 7 _____________________________________ Time: 12:42:00 PM PST US From: Tim Olson Subject: Re: RV10-List: rear seat crotch strap attachment I'm sure SOMEONE left theirs on, but to date I don't remember ever seeing one in person. That lug is a knee-gouge waiting to happen. For what it's worth, even when my kids were much smaller, the 4 points left without the crotch strap are plenty to hold them in. Tim Olson - RV-10 N104CD Danny Riggs wrote: > The discussions i've seen make it appear that most folks cut it off. I'm > at the same stage in building and I'm really tired of sitting on it! One > of these days I'll get agrivated enough to whack it off > > > Subject: RV10-List: rear seat crotch strap attachment > > From: bobturner@alum.rpi.edu > > Date: Tue, 9 Jun 2009 11:44:40 -0700 > > To: rv10-list@matronics.com > > > > > > My QB came with the rear seat crotch strap attachment installed. Does > anyone use this? Any reason not to remove it? (I keep kneeling on it, > and it hurts!) > > > > -------- > > Bob Turner > > RV-10 QB > > > > > > > > > > Read this topic online here: > > > > http://forums.matronics.com/viewtopic.php?p=247452#247452 > > > > > > > > > >====================== > &g================ > > > > > > > > ------------------------------------------------------------------------ > Windows Live: Keep your life in sync. Check it out. > > > * > > > * ________________________________ Message 8 _____________________________________ Time: 02:05:32 PM PST US Subject: RV10-List: Re: How do you change the VFR code on the Garmin GTX 330 From: "Michael Wellenzohn" I just wanted to let you know about a software glitch in Garmins GTX 330. Nothing critical but in case you try to change the VFR ID if you have set before the Aircraft ID to HEX and entered the HEX ID it won't save the newly entered VFR code. YOu have to set the Aircraft ID to N number then reboot and after that you can change the VFR ID in my case to 7000. Then reboot again and set the aircraft id to hex and enter the HEX ID. Now all works fine and now that was the last bit in my panel that needed to be resolved as far as I could test it in the workshop. Now I am waiting for the new VP-200 software update to see the external starter button work. Attached some pics. Cheers Michael -------- RV-10 builder (avionics, wiring) #511 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=247469#247469 Attachments: http://forums.matronics.com//files/dsc04426_535.jpg http://forums.matronics.com//files/dsc04517_193.jpg ________________________________ Message 9 _____________________________________ Time: 07:31:13 PM PST US Subject: RV10-List: Re: Sam James Cowl From: "Lenny Iszak" Just picked up my James plenum today, and Sam showed me an RV-10 with the plenum installed. It had no fiberglass rework on it and the fit was perfect. It looks like all the glitches have are worked out. I will let you all know when I get to install it. Don't have my engine yet. By the way, did any of you get your engine delivered yet from Van's Sun n' Fun deals? Lenny Read this topic online here: http://forums.matronics.com/viewtopic.php?p=247495#247495 ________________________________ Message 10 ____________________________________ Time: 09:23:17 PM PST US Subject: RE: RV10-List: Re: Sam James Cowl From: "Robin Marks" "It looks like all the glitches have are worked out" Lenny, Lenny, Lenny....I think Deems has a bridge to sell you? Robin (wishing you the best) Do Not Archive -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Lenny Iszak Sent: Tuesday, June 09, 2009 7:30 PM Subject: RV10-List: Re: Sam James Cowl Just picked up my James plenum today, and Sam showed me an RV-10 with the plenum installed. It had no fiberglass rework on it and the fit was perfect. It looks like all the glitches have are worked out. I will let you all know when I get to install it. Don't have my engine yet. By the way, did any of you get your engine delivered yet from Van's Sun n' Fun deals? Lenny Read this topic online here: http://forums.matronics.com/viewtopic.php?p=247495#247495 Checked by AVG - www.avg.com 06/09/09 18:08:00 ________________________________ Message 11 ____________________________________ Time: 09:27:46 PM PST US Subject: RV10-List: First Flight From: "partner14" Well add another one to the list.... finally,,,, 414DM flew today... and boy did it fly... straight and level, all temps ok, no problems whatsoever, and I even greased the landing. Now to get the time flown off. Don McDonald #40636 Flying!!!!!!!!!!!!!!! -------- Don A. McDonald 40636 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=247513#247513 ________________________________ Message 12 ____________________________________ Time: 09:40:19 PM PST US From: "Dave Leikam" Subject: Re: RV10-List: Re: Sam James Cowl I got mine on June 1st. Dave Leikam RV-10 #40496 N89DA Muskego, WI do not archive ----- Original Message ----- From: "Lenny Iszak" Sent: Tuesday, June 09, 2009 9:29 PM Subject: RV10-List: Re: Sam James Cowl > > Just picked up my James plenum today, and Sam showed me an RV-10 with the > plenum installed. It had no fiberglass rework on it and the fit was > perfect. It looks like all the glitches have are worked out. I will let > you all know when I get to install it. Don't have my engine yet. > > By the way, did any of you get your engine delivered yet from Van's Sun n' > Fun deals? > > Lenny > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=247495#247495 > > > ________________________________ Message 13 ____________________________________ Time: 09:48:35 PM PST US From: "Les Kearney" Subject: RE: RV10-List: First Flight Congrats Don! You have given #40643 a real incentive to get finished sometime..... Cheers Les -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of partner14 Sent: June-09-09 10:27 PM Subject: RV10-List: First Flight Well add another one to the list.... finally,,,, 414DM flew today... and boy did it fly... straight and level, all temps ok, no problems whatsoever, and I even greased the landing. Now to get the time flown off. Don McDonald #40636 Flying!!!!!!!!!!!!!!! -------- Don A. McDonald 40636 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=247513#247513 ________________________________ Message 14 ____________________________________ Time: 09:48:44 PM PST US From: Patrick Pulis Subject: Re: RV10-List: First Flight Well done Don.- Wishing you smooth, clear and safe skies mate.=0A=0ARegar ds=0A=0APatrick Pulis=0AAdelaide, South Australia=0A=0A=0A=0A=0A___________ _____________________=0AFrom: partner14 =0ATo: rv10-list@matronics.com=0ASent: Wednesday, 10 June, 2009 1:56:46 PM=0ASubje 4" =0A=0AWell add another one to the list.... f inally,,,, 414DM flew today... and boy did it fly... straight and level, al l temps ok, no problems whatsoever, and I even greased the landing.- Now to get the time flown off.=0ADon McDonald=0A#40636 Flying!!!!!!!!!!!!!!!=0A =0A--------=0ADon A. McDonald=0A40636=0A=0A=0A=0A=0ARead this topic online here:=0A=0Ahttp://forums.matronics.com/viewtopic.php?p=247513#247513=0A =========================0A ===================0A=0A=0A Need a Holiday? Win a $10,000 Holiday of your choice. Enter now.http://us.lrd.yah oo.com/_ylc=X3oDMTJxN2x2ZmNpBF9zAzIwMjM2MTY2MTMEdG1fZG1lY2gDVGV4dCBMaW5rB HRtX2xuawNVMTEwMzk3NwR0bV9uZXQDWWFob28hBHRtX3BvcwN0YWdsaW5lBHRtX3BwdHkDYXVu eg--/SIG=14600t3ni/**http%3A//au.rd.yahoo.com/mail/tagline/creativeholida ys/*http%3A//au.docs.yahoo.com/homepageset/%3Fp1=other%26p2=au%26p3=m ailtagline ________________________________ Message 15 ____________________________________ Time: 10:09:01 PM PST US Subject: RE: RV10-List: First Flight From: "McGann, Ron" Congratulations Don - it takes ages to wash the grin off :-) Cheers Ron VH-XRM -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of partner14 Sent: Wednesday, 10 June 2009 2:27 PM Subject: RV10-List: First Flight Well add another one to the list.... finally,,,, 414DM flew today... and boy did it fly... straight and level, all temps ok, no problems whatsoever, and I even greased the landing. Now to get the time flown off. Don McDonald #40636 Flying!!!!!!!!!!!!!!! -------- Don A. McDonald 40636 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=247513#247513 DISCLAIMER:--------------------------------------------------------------------------- This e-mail transmission and any documents, files and previous e-mail messages attached to it are private and confidential. They may contain proprietary or copyright material or information that is subject to legal professional privilege. They are for the use of the intended recipient only. Any unauthorised viewing, use, disclosure, copying, alteration, storage or distribution of, or reliance on, this message is strictly prohibited. No part may be reproduced, adapted or transmitted without the written permission of the owner. If you have received this transmission in error, or are not an authorised recipient, please immediately notify the sender by return email, delete this message and all copies from your e-mail system, and destroy any printed copies. Receipt by anyone other than the intended recipient should not be deemed a waiver of any privilege or protection. Thales Australia does not warrant or represent that this e-mail or any documents, files and previous e-mail messages attached are error or virus free. -------------------------------------------------------------------------------------- ________________________________ Message 16 ____________________________________ Time: 11:37:07 PM PST US From: "Chris and Susie" Subject: Re: RV10-List: First Flight Onya Don congrats from down below Chris VH-ICY ----- Original Message ----- From: "partner14" Sent: Wednesday, June 10, 2009 2:26 PM Subject: RV10-List: First Flight > > Well add another one to the list.... finally,,,, 414DM flew today... and > boy did it fly... straight and level, all temps ok, no problems > whatsoever, and I even greased the landing. Now to get the time flown > off. > Don McDonald > #40636 Flying!!!!!!!!!!!!!!! > > -------- > Don A. McDonald > 40636 > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=247513#247513 > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.