---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Wed 06/10/09: 22 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:39 AM - Re: First Flight (Michael Wellenzohn) 2. 06:04 AM - Re: Sam James Cowl (Lenny Iszak) 3. 06:16 AM - Re: First Flight (Deems Davis) 4. 06:39 AM - Re: First Flight (Fred Williams, M.D.) 5. 06:39 AM - Re: First Flight (Tim Olson) 6. 06:52 AM - Re: First Flight (Condrey, Bob (US SSA)) 7. 07:27 AM - Re: First Flight (Don McDonald) 8. 09:23 AM - Re: First Flight (Robin Marks) 9. 10:01 AM - Re: First Flight (woxofswa) 10. 10:02 AM - Seamech air conditioning (woxofswa) 11. 04:25 PM - Re: Seamech air conditioning (Perry, Phil) 12. 05:54 PM - First Flight N46WD (Frank Dombroski) 13. 06:30 PM - Re: First Flight N46WD (Deems Davis) 14. 06:56 PM - Re: First Flight N46WD (fdombroski) 15. 06:56 PM - Van's cowl For Sale- Chicago area (Phil White) 16. 07:06 PM - Re: First Flight N46WD (Bob Leffler) 17. 07:40 PM - Re: Re: First Flight N46WD (Jesse Saint) 18. 07:41 PM - Re: Re: First Flight N46WD (William Curtis) 19. 07:42 PM - Re: First Flight N46WD (Tim Olson) 20. 07:55 PM - Re: Re: First Flight N46WD (Patrick Pulis) 21. 09:33 PM - Re: rear seat crotch strap attachment (AirMike) 22. 09:45 PM - Re: First Flight N46WD (Don McDonald) ________________________________ Message 1 _____________________________________ Time: 12:39:15 AM PST US Subject: RV10-List: Re: First Flight From: "Michael Wellenzohn" Well done, congratulation from CH as well! Can't wait but still so much to do. Mike -------- RV-10 builder (avionics, wiring) #511 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=247523#247523 ________________________________ Message 2 _____________________________________ Time: 06:04:20 AM PST US Subject: RV10-List: Re: Sam James Cowl From: "Lenny Iszak" Robin, if it fits will you inflate my air matress at Osh, your way? :)) Seriously, after hearing a few horror stories how this thing didn't fit and needed a lot of rework, I was somewhat relieved to see one installed and looking like it wasn't a big deal. I'll keep my fingers crossed. Lenny Read this topic online here: http://forums.matronics.com/viewtopic.php?p=247543#247543 ________________________________ Message 3 _____________________________________ Time: 06:16:46 AM PST US From: Deems Davis Subject: Re: RV10-List: First Flight Great Job, and Congratulations Don. Sounds like you are off to a great start. keep us informed on how it goes. Whats is the boundary of your test area? Deems partner14 wrote: > > Well add another one to the list.... finally,,,, 414DM flew today... and boy did it fly... straight and level, all temps ok, no problems whatsoever, and I even greased the landing. Now to get the time flown off. > Don McDonald > #40636 Flying!!!!!!!!!!!!!!! > > -------- > Don A. McDonald > 40636 > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=247513#247513 > > > ________________________________ Message 4 _____________________________________ Time: 06:39:01 AM PST US From: "Fred Williams, M.D." Subject: Re: RV10-List: First Flight Congratulations Don All that work begins to pay off. We want pics....... :-) Fred Williams N515FW. Hopefully off to Kansas for a day trip this weekend. ________________________________ Message 5 _____________________________________ Time: 06:39:53 AM PST US From: Tim Olson Subject: Re: RV10-List: First Flight That's awesome, Don! Glad it went well for you. What kind of plane did you end up in for your training? That flyoff should give you a good bit of experience. Tim Olson - RV-10 N104CD do not archive partner14 wrote: > > > Well add another one to the list.... finally,,,, 414DM flew today... > and boy did it fly... straight and level, all temps ok, no problems > whatsoever, and I even greased the landing. Now to get the time > flown off. Don McDonald #40636 Flying!!!!!!!!!!!!!!! > > -------- Don A. McDonald 40636 > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=247513#247513 > > ________________________________ Message 6 _____________________________________ Time: 06:52:23 AM PST US Subject: RE: RV10-List: First Flight From: "Condrey, Bob (US SSA)" Congratulations, our fleet is growing rapidly! Good luck with the rest of the flyoff. Bob -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of partner14 Sent: Tuesday, June 09, 2009 11:27 PM Subject: RV10-List: First Flight Well add another one to the list.... finally,,,, 414DM flew today... and boy did it fly... straight and level, all temps ok, no problems whatsoever, and I even greased the landing. Now to get the time flown off. Don McDonald #40636 Flying!!!!!!!!!!!!!!! -------- Don A. McDonald 40636 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=247513#247513 ________________________________ Message 7 _____________________________________ Time: 07:27:14 AM PST US From: Don McDonald Subject: Re: RV10-List: First Flight I really lucked out... I became farely good friends with the FAA inspector. .. he not only came out and inspected the plane on his own time, but afterw ard we all went out to dinner.- Anyway, I specifically asked for an area to the west and north of the Lincoln airport so it would include the Orovil le and Willows airports (still gotta eat, right), then he not only granted that, but gave me the 50 mile radiius as well.- Thanks, Don --- On Wed, 6/10/09, Deems Davis wrote: From: Deems Davis Subject: Re: RV10-List: First Flight Great Job, and Congratulations Don. Sounds like you are off to a great start. keep us informed on how it goes. Whats is the boundary of your test area? Deems partner14 wrote: > > Well add another one to the list.... finally,,,, 414DM flew today... and boy did it fly... straight and level, all temps ok, no problems whatsoever, and I even greased the landing.- Now to get the time flown off. > Don McDonald > #40636 Flying!!!!!!!!!!!!!!! > > -------- > Don A. McDonald > 40636 > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=247513#247513 > > >--- le, List Admin. =0A=0A=0A ________________________________ Message 8 _____________________________________ Time: 09:23:55 AM PST US Subject: RE: RV10-List: First Flight From: "Robin Marks" Fantastic Don. Your Phase 1 will be complete before you know it and then the world is just a few fill ups away. Robin -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of partner14 Sent: Tuesday, June 09, 2009 9:27 PM Subject: RV10-List: First Flight Well add another one to the list.... finally,,,, 414DM flew today... and boy did it fly... straight and level, all temps ok, no problems whatsoever, and I even greased the landing. Now to get the time flown off. Don McDonald #40636 Flying!!!!!!!!!!!!!!! -------- Don A. McDonald 40636 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=247513#247513 Checked by AVG - www.avg.com 06/10/09 05:52:00 ________________________________ Message 9 _____________________________________ Time: 10:01:26 AM PST US Subject: RV10-List: Re: First Flight From: "woxofswa" Congrats Don. Hope to see you and your ship at Copperstate. I'll start marinating the asada. -------- Myron Nelson Mesa, AZ Emp completed, legacy build fuse in progress Read this topic online here: http://forums.matronics.com/viewtopic.php?p=247564#247564 ________________________________ Message 10 ____________________________________ Time: 10:02:26 AM PST US Subject: RV10-List: Seamech air conditioning From: "woxofswa" Anyone know anything about a company call Seamech and their a/c package for RV's? -------- Myron Nelson Mesa, AZ Emp completed, legacy build fuse in progress Read this topic online here: http://forums.matronics.com/viewtopic.php?p=247565#247565 ________________________________ Message 11 ____________________________________ Time: 04:25:12 PM PST US Subject: RE: RV10-List: Seamech air conditioning From: "Perry, Phil" Not much help for you, but I'm planning on going with the portable unit from Plane Air. I like the portability and flexibility of trading weight for cooling. :) http://www.planeairusa.com Phil -----Original Message----- From: woxofswa [mailto:woxof@aol.com] Sent: Wednesday, June 10, 2009 12:02 PM Subject: RV10-List: Seamech air conditioning Anyone know anything about a company call Seamech and their a/c package for RV's? -------- Myron Nelson Mesa, AZ Emp completed, legacy build fuse in progress Read this topic online here: http://forums.matronics.com/viewtopic.php?p=247565#247565 ________________________________ Message 12 ____________________________________ Time: 05:54:53 PM PST US From: "Frank Dombroski" Subject: RV10-List: First Flight N46WD Another first flight. they seem to be accelerating as well as the -10's do. First day accounted for 6 hours of aviating joy. Plane trims to a balanced hands off state. I still have a few EFIS/Avionics settings to wrestle with, and some radio noise to quiet down, but the bird flys like a dream. Cheers, Frank Dombroski N46WD - Aviating N40 ________________________________ Message 13 ____________________________________ Time: 06:30:26 PM PST US From: Deems Davis Subject: Re: RV10-List: First Flight N46WD Good News and Good job Frank! tell us a little bit about your plane and how you 'outfitted' WD. Pictures? This is getting to be a very pleasant announcement, At this rate OSH will have to double the parking capacity for RV10's this year. And at 6 hour's on the 1st day, frank will soon equal Tim O. for TTAE. Deems Frank Dombroski wrote: > > Another first flight they seem to be accelerating as well as the > -10s do. First day accounted for 6 hours of aviating joy. Plane trims > to a balanced hands off state. I still have a few EFIS/Avionics > settings to wrestle with, and some radio noise to quiet down, but the > bird flys like a dream. > > * > * ________________________________ Message 14 ____________________________________ Time: 06:56:50 PM PST US Subject: RV10-List: Re: First Flight N46WD From: "fdombroski" Empty weight is 1642, this is without paint, rear seats and a few additional creature comforts to be added. I have attached a couple of photos... 2 x AFS 3500 - awaiting one Deck, love these units GTX330 GNS430 ICOM A210 TT VSVG - awaiting Head w/AFS custom software, servos in Dynon D100 -------- Frank Dombroski RV-10 N46WD final assembly RV-8 N84FD final assembly N40 Sky Manor Airport Read this topic online here: http://forums.matronics.com/viewtopic.php?p=247634#247634 Attachments: http://forums.matronics.com//files/rv_10_final_finish_047_230.jpg http://forums.matronics.com//files/rv_10_final_finish_091_143.jpg http://forums.matronics.com//files/rv_10_final_finish_072_206.jpg ________________________________ Message 15 ____________________________________ Time: 06:56:51 PM PST US Subject: RV10-List: Van's cowl For Sale- Chicago area From: "Phil White" I have a stock Van's cowl that won't fit my alternate engine installation. I will deliver free withing 250 miles. $950 or best offer. Save on Van's crating and shipping charges! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=247635#247635 ________________________________ Message 16 ____________________________________ Time: 07:06:16 PM PST US From: "Bob Leffler" Subject: RE: RV10-List: First Flight N46WD Congratulations to both Don and Frank! I think Jeff will need to add a couple more rows to accommodate all the new RV-10s this year. From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Frank Dombroski Sent: Wednesday, June 10, 2009 8:54 PM Subject: RV10-List: First Flight N46WD Another first flight. they seem to be accelerating as well as the -10's do. First day accounted for 6 hours of aviating joy. Plane trims to a balanced hands off state. I still have a few EFIS/Avionics settings to wrestle with, and some radio noise to quiet down, but the bird flys like a dream. Cheers, Frank Dombroski N46WD - Aviating N40 ________________________________ Message 17 ____________________________________ Time: 07:40:01 PM PST US From: Jesse Saint Subject: Re: RV10-List: Re: First Flight N46WD Congrats, and a very nice panel. do not archive Jesse Saint Saint Aviation, Inc. jesse@saintaviation.com Cell: 352-427-0285 Fax: 815-377-3694 On Jun 10, 2009, at 9:55 PM, fdombroski wrote: > > Empty weight is 1642, this is without paint, rear seats and a few > additional creature comforts to be added. > > > I have attached a couple of photos... > > 2 x AFS 3500 - awaiting one Deck, love these units > GTX330 > GNS430 > ICOM A210 > TT VSVG - awaiting Head w/AFS custom software, servos in > Dynon D100 > > -------- > Frank Dombroski > RV-10 N46WD final assembly > RV-8 N84FD final assembly > N40 Sky Manor Airport > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=247634#247634 > > > Attachments: > > http://forums.matronics.com//files/rv_10_final_finish_047_230.jpg > http://forums.matronics.com//files/rv_10_final_finish_091_143.jpg > http://forums.matronics.com//files/rv_10_final_finish_072_206.jpg > > ________________________________ Message 18 ____________________________________ Time: 07:41:17 PM PST US Subject: Re: RV10-List: Re: First Flight N46WD From: William Curtis Congratulation Frank! Look forward to seeing it next time I'm at Sky Manor. William http://wcurtis.nerv10.com/ On Wed, Jun 10, 2009 at 9:55 PM, fdombroski wrote: > > Empty weight is 1642, this is without paint, rear seats and a few > additional creature comforts to be added. > > > I have attached a couple of photos... > > 2 x AFS 3500 - awaiting one Deck, love these units > GTX330 > GNS430 > ICOM A210 > TT VSVG - awaiting Head w/AFS custom software, servos in > Dynon D100 > > -------- > Frank Dombroski > RV-10 N46WD final assembly > RV-8 N84FD final assembly > N40 Sky Manor Airport > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=247634#247634 > > > Attachments: > > http://forums.matronics.com//files/rv_10_final_finish_047_230.jpg > http://forums.matronics.com//files/rv_10_final_finish_091_143.jpg > http://forums.matronics.com//files/rv_10_final_finish_072_206.jpg > > ________________________________ Message 19 ____________________________________ Time: 07:42:26 PM PST US From: Tim Olson Subject: Re: RV10-List: First Flight N46WD Big congrats to you Frank, can't wait to see it! And Deems, I may fly a lot, but that Scott Schmidt character...he flies even more than I do! I've been getting a lot of time in that leased cherokee lately too....it sure makes me miss the RV-10. :) Tim Olson - RV-10 N104CD do not archive Deems Davis wrote: > > Good News and Good job Frank! tell us a little bit about your plane and > how you 'outfitted' WD. Pictures? > > This is getting to be a very pleasant announcement, At this rate OSH > will have to double the parking capacity for RV10's this year. And at 6 > hour's on the 1st day, frank will soon equal Tim O. for TTAE. > > Deems > > Frank Dombroski wrote: >> >> Another first flight they seem to be accelerating as well as the >> -10s do. First day accounted for 6 hours of aviating joy. Plane trims >> to a balanced hands off state. I still have a few EFIS/Avionics >> settings to wrestle with, and some radio noise to quiet down, but the >> bird flys like a dream. >> >> * ________________________________ Message 20 ____________________________________ Time: 07:55:43 PM PST US From: Patrick Pulis Subject: Re: RV10-List: Re: First Flight N46WD Congratulations Frank, well done.- Wishing you safe and smooth skies.=0A =0ARegards from down under=0A=0APatrick Pulis=0AAdelaide, South Australia =0A=0A=0A=0A=0A________________________________=0AFrom: fdombroski =0ATo: rv10-list@matronics.com=0ASent: Thursday, 11 June, 20 09 11:25:29 AM=0ASubject: RV10-List: Re: First Flight N46WD=0A=0A--> RV10-L ist message posted by: "fdombroski" =0A=0AEmpty weig ht is 1642, this is without paint, rear seats and a few additional creature comforts to be added.=0A=0A=0AI have attached a couple of photos...=0A=0A2 x AFS 3500 - awaiting one Deck, love these units=0AGTX330=0AGNS430=0AICOM A210=0ATT VSVG - awaiting Head w/AFS custom software, servos in=0ADynon D10 0=0A=0A--------=0AFrank Dombroski=0ARV-10 N46WD final assembly=0ARV-8 N84FD final assembly=0AN40 Sky Manor Airport=0A=0A=0A=0A=0ARead this topic onlin e here:=0A=0Ahttp://forums.matronics.com/viewtopic.php?p=247634#247634=0A =0A=0A=0A=0AAttachments: =0A=0Ahttp://forums.matronics.com//files/rv_10_fin al_finish_047_230.jpg=0Ahttp://forums.matronics.com//files/rv_10_final_fini sh_091_143.jpg=0Ahttp://forums.matronics.com//files/rv_10_final_finish_072_ =========================0A ===================0A=0A=0A Need a Holiday? Win a $10,000 Holiday of your choice. Enter now.http://us.lrd.yah oo.com/_ylc=X3oDMTJxN2x2ZmNpBF9zAzIwMjM2MTY2MTMEdG1fZG1lY2gDVGV4dCBMaW5rB HRtX2xuawNVMTEwMzk3NwR0bV9uZXQDWWFob28hBHRtX3BvcwN0YWdsaW5lBHRtX3BwdHkDYXVu eg--/SIG=14600t3ni/**http%3A//au.rd.yahoo.com/mail/tagline/creativeholida ys/*http%3A//au.docs.yahoo.com/homepageset/%3Fp1=other%26p2=au%26p3=m ailtagline ________________________________ Message 21 ____________________________________ Time: 09:33:17 PM PST US Subject: RV10-List: Re: rear seat crotch strap attachment From: "AirMike" Now I know what that left over piece in the parts box is................... -------- OSH '08 or Bust (busted) be there in "09 Q/B Kit - FWF end game Read this topic online here: http://forums.matronics.com/viewtopic.php?p=247651#247651 ________________________________ Message 22 ____________________________________ Time: 09:45:58 PM PST US From: Don McDonald Subject: Re: RV10-List: First Flight N46WD Way to go Frank.=C2- I'm going out again tomorrow to try and get a couple of hours in.=C2- Is anybody keeping track of how many 10's are flying no w? Don McDonald --- On Wed, 6/10/09, Frank Dombroski wrote: From: Frank Dombroski Subject: RV10-List: First Flight N46WD Another first flight they seem to be accelerating as well as the - 10=99s do.=C2- First day accounted for 6 hours of aviating joy.=C2 - Plane trims to a balanced hands off state.=C2- I still have a few EFI S/Avionics settings to wrestle with, and some radio noise to quiet down, bu t the bird flys like a dream. =C2- Cheers, Frank Dombroski N46WD - Aviating N40 =0A=0A=0A ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.