---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sun 07/12/09: 12 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:23 AM - Spinner Back Plate Spacer (William Curtis) 2. 10:16 AM - Re: Spinner Back Plate Spacer (orchidman) 3. 11:17 AM - Re: Spinner Back Plate Spacer (Bill Mauledriver Watson) 4. 12:04 PM - Re: Spinner Back Plate Spacer (William Curtis) 5. 12:11 PM - Re: Spinner Back Plate Spacer (N777TY) 6. 02:36 PM - Flap Positioning System Instructions (johngoodman) 7. 03:06 PM - Re: Flap Positioning System Instructions (Lenny Iszak) 8. 05:15 PM - Re: Flap Positioning System Instructions (johngoodman) 9. 06:22 PM - Rudder Stop (Scott Schmidt) 10. 07:44 PM - Re: Rudder Stop (Jesse Saint) 11. 08:52 PM - Re: Rudder Stop (DejaVu) 12. 10:53 PM - Re: Hanger for shoulder belts? (AirMike) ________________________________ Message 1 _____________________________________ Time: 08:23:40 AM PST US Subject: RV10-List: Spinner Back Plate Spacer From: William Curtis I'm fitting the prop with an old Hartzell hub and I need to know the hight of the spacer specified on page 47-02 Figure 1 - Spinner Back Plate assembly. William 40237 - http://nerv10.com/wcurtis/ ________________________________ Message 2 _____________________________________ Time: 10:16:42 AM PST US Subject: RV10-List: Re: Spinner Back Plate Spacer From: "orchidman" [quote="wcurtis(at)nerv10.com"]I'm fitting the prop with an old Hartzell hub and I need to know the hight of the spacer specified on page 47-02 Figure 1 - Spinner Back Plate assembly. William 40237 - http://nerv10.com/wcurtis/ (http://nerv10.com/wcurtis/) > [b] Not sure if I can help with the plane at the hanger but are you wanting to know the thickness of the S-602-1, its diameter, or the Doubler Ring S-602B or ??? Not sure what you mean by 'hight' -------- Gary Blankenbiller RV10 - # 40674 (N2GB Flying) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=252663#252663 ________________________________ Message 3 _____________________________________ Time: 11:17:05 AM PST US From: Bill Mauledriver Watson Subject: Re: RV10-List: Spinner Back Plate Spacer William, unfortunately, I can't get a gauge on the spacer or the doubler. I assume you are looking for the thickness of the spacers in Figure 2 rather than the doubler in figure 1. William Curtis wrote: > I'm fitting the prop with an old Hartzell hub and I need to know the > hight of the spacer specified on page 47-02 Figure 1 - Spinner Back > Plate assembly. > > William > 40237 - http://nerv10.com/wcurtis/ > * > > > * ________________________________ Message 4 _____________________________________ Time: 12:04:46 PM PST US Subject: Re: RV10-List: Spinner Back Plate Spacer From: William Curtis Bill, Yup, you are right it is Figure 2. It looks like the part number is S-604 and the height is 1/4", Larry Rosen confirmed this for me. This spacer is between the prop hub and the spinner backing plate as depicted in chapter 47 Figure 2. Since I did not have a new prop that I'm using to fit the spinner and cowling, I did not have the appropriate spacers. I'm fabricating the spacers for fitting purposes. Thanks for the help. William 40237 - http://nerv10.com/wcurtis/ On Sun, Jul 12, 2009 at 2:12 PM, Bill Mauledriver Watson < MauleDriver@nc.rr.com> wrote: > MauleDriver@nc.rr.com> > > William, unfortunately, I can't get a gauge on the spacer or the doubler. > I assume you are looking for the thickness of the spacers in Figure 2 > rather than the doubler in figure 1. > > > William Curtis wrote: > >> I'm fitting the prop with an old Hartzell hub and I need to know the hight >> of the spacer specified on page 47-02 Figure 1 - Spinner Back Plate >> assembly. >> William >> 40237 - http://nerv10.com/wcurtis/ >> * >> >> >> * >> > > ________________________________ Message 5 _____________________________________ Time: 12:11:24 PM PST US Subject: RV10-List: Re: Spinner Back Plate Spacer From: "N777TY" Van's sells these spacers.... of course, I found that out after I sourced them out from somewhere else.. You don't wanna know how much Hartzell wants for 'em... :) but they're $5 each at Vans.. -------- RV-7A N777TY Read this topic online here: http://forums.matronics.com/viewtopic.php?p=252680#252680 ________________________________ Message 6 _____________________________________ Time: 02:36:29 PM PST US Subject: RV10-List: Flap Positioning System Instructions From: "johngoodman" Anybody have a copy of the FPS installation instructions? Mine have sprung legs. John -------- #40572 QB Fuselage, wings finished. Finish Kit started. N711JG reserved Read this topic online here: http://forums.matronics.com/viewtopic.php?p=252691#252691 ________________________________ Message 7 _____________________________________ Time: 03:06:55 PM PST US Subject: RV10-List: Re: Flap Positioning System Instructions From: "Lenny Iszak" See these links: http://www.showplanes.com/flap_switch_instructions_pg1.pdf http://www.showplanes.com/flap_switch_instructions_pg2.pdf Lenny Read this topic online here: http://forums.matronics.com/viewtopic.php?p=252697#252697 ________________________________ Message 8 _____________________________________ Time: 05:15:00 PM PST US Subject: RV10-List: Re: Flap Positioning System Instructions From: "johngoodman" Thanks, Lenny. Just what I needed. John -------- #40572 QB Fuselage, wings finished. Finish Kit started. N711JG reserved Read this topic online here: http://forums.matronics.com/viewtopic.php?p=252718#252718 ________________________________ Message 9 _____________________________________ Time: 06:22:35 PM PST US From: Scott Schmidt Subject: RV10-List: Rudder Stop This is my "Save the Rudder" mission. http://www.vansairforce.com/community/showthread.php?p=341640&posted=1#post341640 Scott Schmidt ________________________________ Message 10 ____________________________________ Time: 07:44:34 PM PST US From: Jesse Saint Subject: Re: RV10-List: Rudder Stop I agree completely. Does anybody have the sheer strength data to compare that of a #6 steel screw to that of a AD4 aluminum rivet? Jesse Saint Saint Aviation, Inc. jesse@saintaviation.com Cell: 352-427-0285 Fax: 815-377-3694 On Jul 12, 2009, at 8:18 PM, Scott Schmidt wrote: > This is my "Save the Rudder" mission. > > http://www.vansairforce.com/community/showthread.php?p=341640&posted=1#post341640 > > Scott Schmidt > > ________________________________ Message 11 ____________________________________ Time: 08:52:52 PM PST US Subject: Re: RV10-List: Rudder Stop From: DejaVu Yes all three AD4's on one of my stops sheered off during less gusty condition than 50kts. I use #6 screws in their places now. Anh N591VU - flying On Sun 07/12/09 10:37 PM , Jesse Saint jesse@saintaviation.com sent: I agree completely. Does anybody have the sheer strength data to compare that of a #6 steel screw to that of a AD4 aluminum rivet? Jesse Saint Saint Aviation, Inc. jesse@saintaviation.com [1] Cell: Links: ------ [1] mailto:jesse@saintaviation.com [2] http://www.vansairforce.com/community/showthread.php?p=341640&posted =1#post341640 [3] http://metromail.metrocast.net/HTTP://WWW.MATRONICS.COM/NAVIGATOR?RV10-LIST [4] http://metromail.metrocast.net/HTTP://FORUMS.MATRONICS.COM/ [5] http://metromail.metrocast.net/HTTP://WWW.MATRONICS.COM/CONTRIBUTION ________________________________ Message 12 ____________________________________ Time: 10:53:21 PM PST US Subject: RV10-List: Re: Hanger for shoulder belts? From: "AirMike" Dave McNeil made a very cool seat belt holder from one piece of aluminum. It is fairly heavy guage aluminum. The idea of the handles is that you pull it away from the cabin top (1/4") to to release the tension that holds the "keeper" edges on the cabin top. That releases the belt. You slide it out and use it. Reverse the process upon landing. Very simple and elegant - all in one piece. Works great - looks great. I would go for a more rounded knob or lower profile, but the setup works great. -------- OSH '09 or Bust (busted) be there someday Q/B Kit - FWF end game Read this topic online here: http://forums.matronics.com/viewtopic.php?p=252753#252753 Attachments: http://forums.matronics.com//files/p7102376_660.jpg ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.