---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Mon 07/13/09: 21 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:41 AM - FW: Home available in OSH (John Cox) 2. 07:50 AM - Email for Mike Schulz? (Dawson-Townsend,Timothy) 3. 09:19 AM - static lines (Sandra & Rick Lark) 4. 09:29 AM - Re: static lines (Condrey, Bob (US SSA)) 5. 09:35 AM - Re: static lines (AirMike) 6. 09:40 AM - Re: static lines (Rene Felker) 7. 09:52 AM - Re: static lines (Jeff Carpenter) 8. 10:23 AM - Hanger for shoulder belts? () 9. 10:42 AM - Re: static lines (Bill Mauledriver Watson) 10. 10:43 AM - Re: static lines (Lew Gallagher) 11. 11:10 AM - Re: Email for Mike Schulz? (Lew Gallagher) 12. 11:23 AM - Re: FW: Home available in OSH (Robin Marks) 13. 11:31 AM - Selling RV10 Baggage door & compass (AirMike) 14. 03:42 PM - oil cooling (pilotdds@aol.com) 15. 04:06 PM - Re: oil cooling (pilotdds@aol.com) 16. 06:56 PM - Re: LSE cooling (John Testement) 17. 07:52 PM - Re: LSE cooling (Condrey, Bob (US SSA)) 18. 08:12 PM - Re: FW: Home available in OSH (John Cox) 19. 09:22 PM - Re: Hanger for shoulder belts? (Don McDonald) 20. 09:54 PM - Re: FW: Home available in OSH (Robin Marks) 21. 11:12 PM - Re: FW: Home available in OSH (Robin Marks) ________________________________ Message 1 _____________________________________ Time: 06:41:30 AM PST US Subject: RV10-List: FW: Home available in OSH From: "John Cox" _____________________________________________ I still have a room or two available for wayward pilots or builders in Old Oshkosh. Five bedrooms, 2.5 baths, sleeps eight, Central Air Conditioning, newly remodeled S.Steel kitchen appliances, HDTV and just 5 minutes from the field. $250 for an individual or $500 for a couple from Sunday, July 26th through Sunday, August 2. John Cox - Oregon and headed to OSH '09 503-453-6016 cellular ________________________________ Message 2 _____________________________________ Time: 07:50:53 AM PST US Subject: RV10-List: Email for Mike Schulz? From: "Dawson-Townsend,Timothy" Mike, are you out there, or does someone have an email for Mike vis-=E0-vis countersink for shoulder belts? TDT Tim Dawson-Townsend 40025 tdt@aurora.aero 617-500-4812 (office) 617-905-4800 (mobile) ________________________________ Message 3 _____________________________________ Time: 09:19:06 AM PST US From: "Sandra & Rick Lark" Subject: RV10-List: static lines Hi all Just trying to assemble a parts list for Airventure and would like to use the Cleveland Tools static ports. It appears they are designed for 1/4" tygon tubing which I have lots of experience with. My concern is whether it is ridged enough and can support itself on it's way to the instrument panel from the tail ( ie will it sag and pinch itself off in between ribs etc?). Other possible solutions would be Safeairs fittings/tubing etc. Also ACS has their tubing etc. General consensus?? Any and all opinions welcome. Thx Rick 40956 ________________________________ Message 4 _____________________________________ Time: 09:29:04 AM PST US Subject: RE: RV10-List: static lines From: "Condrey, Bob (US SSA)" I used them and transitioned to 1/4" OD tubing just aft of the baggage bulkhead. Bob N442PM (flying) -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Sandra & Rick Lark Sent: Monday, July 13, 2009 11:17 AM Subject: RV10-List: static lines Hi all Just trying to assemble a parts list for Airventure and would like to use the Cleveland Tools static ports. It appears they are designed for 1/4" tygon tubing which I have lots of experience with. My concern is whether it is ridged enough and can support itself on it's way to the instrument panel from the tail ( ie will it sag and pinch itself off in between ribs etc?). Other possible solutions would be Safeairs fittings/tubing etc. Also ACS has their tubing etc. General consensus?? Any and all opinions welcome. Thx Rick 40956 ________________________________ Message 5 _____________________________________ Time: 09:35:35 AM PST US Subject: RV10-List: Re: static lines From: "AirMike" I have the Cleveland kit. It seems fairly rigid. Be sure to run an arc higher than the ports to drain water. I suspended it with tie wraps behind the cabin and then ran it in the regular holes protected with snap bushings. If you are really concerned buy some Click Bond fasteners to secure the tubing to the airframe between frames. You should look into the Click Bond fasteners anyway for wire runs. Way good stuff but pricey. http://www.theflightshop.com/ -------- OSH '09 or Bust (busted) be there someday Q/B Kit - FWF end game Read this topic online here: http://forums.matronics.com/viewtopic.php?p=252798#252798 ________________________________ Message 6 _____________________________________ Time: 09:40:28 AM PST US From: "Rene Felker" Subject: RE: RV10-List: static lines I used the safeair ports, tubing and fittings. Works great. Also, I think Stein is also selling the quick disconnect fittings. Rene' Felker RV-10 N423CF Flying 801-721-6080 -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Sandra & Rick Lark Sent: Monday, July 13, 2009 10:17 AM Subject: RV10-List: static lines Hi all Just trying to assemble a parts list for Airventure and would like to use the Cleveland Tools static ports. It appears they are designed for 1/4" tygon tubing which I have lots of experience with. My concern is whether it is ridged enough and can support itself on it's way to the instrument panel from the tail ( ie will it sag and pinch itself off in between ribs etc?). Other possible solutions would be Safeairs fittings/tubing etc. Also ACS has their tubing etc. General consensus?? Any and all opinions welcome. Thx Rick 40956 ________________________________ Message 7 _____________________________________ Time: 09:52:36 AM PST US From: Jeff Carpenter Subject: Re: RV10-List: static lines I've got the Clevelnd ports interfaced to Stein's static tubing with 1/4" id clear tubing from the aviation department of my True Value hardware store. It wasn't too hard to mount and support it all in a way that will not pinch itself off... I don't have any pics, but could take some in the next day or two if that would be helpful. Jeff Carpenter 40304 On Jul 13, 2009, at 9:16 AM, Sandra & Rick Lark wrote: > > > Hi all > > Just trying to assemble a parts list for Airventure and would like > to use the Cleveland Tools static ports. It appears they are > designed for 1/4" tygon tubing which I have lots of experience with. > > My concern is whether it is ridged enough and can support itself on > it's way to the instrument panel from the tail ( ie will it sag and > pinch itself off in between ribs etc?). > > Other possible solutions would be Safeairs fittings/tubing etc. > Also ACS has their tubing etc. General consensus?? > > Any and all opinions welcome. Thx > > Rick > 40956 > > ________________________________ Message 8 _____________________________________ Time: 10:23:40 AM PST US From: Subject: RV10-List: Hanger for shoulder belts? Still looking for the response to where did you get the headliner? I believe the question goes to Don McDonald who posted the very nice picture of the hanger location that prompted the question. Others are anxiously waiting!!! Thanks, Rich ________________________________ Message 9 _____________________________________ Time: 10:42:00 AM PST US From: Bill Mauledriver Watson Subject: Re: RV10-List: static lines Like others, I used Tygon to attach to the ports then transitioned to the stiff stuff and the quick connect fittings right behind the baggage area. I had first plumbed it with Tygon all the way to the front but went back and changed it to the stiff stuff and the screw on fittings because the fittings are easier to handle than the barbed stuff. And the stiff tubing may be tougher than the Tygon. Remember that if you are installing a GRT or similar system with a remote AHRS, you may need to plumb a static drop or two for he the AHRS. My dual GRT AHRS is installed on the Vans supplied shelf next to the battery and pitch AP servo. Bill Watson 40605 Sandra & Rick Lark wrote: > > Hi all > > Just trying to assemble a parts list for Airventure and would like to > use the Cleveland Tools static ports. It appears they are designed > for 1/4" tygon tubing which I have lots of experience with. > > My concern is whether it is ridged enough and can support itself on > it's way to the instrument panel from the tail ( ie will it sag and > pinch itself off in between ribs etc?). > > Other possible solutions would be Safeairs fittings/tubing etc. Also > ACS has their tubing etc. General consensus?? > > Any and all opinions welcome. Thx > > Rick > 40956 > > ________________________________ Message 10 ____________________________________ Time: 10:43:18 AM PST US Subject: RV10-List: Re: static lines From: "Lew Gallagher" Hey Jeff, Pictures would be great. Thanks in advance. Later, - Lew -------- non-pilot crazy about building NOW OFICIALLY BUILDER #40549 Painting done! On with wiring and avionics. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=252811#252811 ________________________________ Message 11 ____________________________________ Time: 11:10:47 AM PST US From: "Lew Gallagher" Subject: Re: RV10-List: Email for Mike Schulz? Hey Tim, I had sent the countersink on another loop and along the way I think it got replaced with a sharper one. Bob was the last on my list before it was to come back to me, but apparently he's added Mike since I didn't have that name. And now there's Eric and yourself. It shouldn't be too hard to coordinate, but I would like to be back on the end of the list. By the way, if you plan to glass over the heads of the screws on the canopy top, you need to countersink a little deeper than flush. Later, - Lew ----- Original Message ----- From: Dawson-Townsend,Timothy To: rv10-list@matronics.com Sent: Monday, July 13, 2009 10:46 AM Subject: RV10-List: Email for Mike Schulz? Mike, are you out there, or does someone have an email for Mike vis-=E0-vis countersink for shoulder belts? TDT Tim Dawson-Townsend 40025 tdt@aurora.aero 617-500-4812 (office) 617-905-4800 (mobile) ________________________________ Message 12 ____________________________________ Time: 11:23:09 AM PST US Subject: RE: RV10-List: FW: Home available in OSH From: "Robin Marks" John, How are you getting to OSH? Robin From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of John Cox Sent: Monday, July 13, 2009 6:40 AM Subject: RV10-List: FW: Home available in OSH _____________________________________________ I still have a room or two available for wayward pilots or builders in Old Oshkosh. Five bedrooms, 2.5 baths, sleeps eight, Central Air Conditioning, newly remodeled S.Steel kitchen appliances, HDTV and just 5 minutes from the field. $250 for an individual or $500 for a couple from Sunday, July 26th through Sunday, August 2. John Cox - Oregon and headed to OSH '09 503-453-6016 cellular Checked by AVG - www.avg.com 07/12/09 17:56:00 ________________________________ Message 13 ____________________________________ Time: 11:31:39 AM PST US Subject: RV10-List: Selling RV10 Baggage door & compass From: "AirMike" Now at the end of the build process, I need to get rid of some stuff.. I have an baggage door (inside/outside and frames). I managed to salvage the original that I had originally screwed up. Also I have compass that I believe came from a C182. It is short a bit of fluid, but seems to be in fine condition. In the spirit of this web site, I will sell these things to the first member to make a reasonable offer and postage. -------- OSH '09 or Bust (busted) be there someday Q/B Kit - end game Read this topic online here: http://forums.matronics.com/viewtopic.php?p=252819#252819 ________________________________ Message 14 ____________________________________ Time: 03:42:43 PM PST US Subject: RV10-List: oil cooling From: pilotdds@aol.com How are you doing with your oil temps-How is your plenum working out-was it scratch built?thanks for your input--jim -----Original Message----- From: partner14 Sent: Mon, Jul 6, 2009 10:51 pm Subject: RV10-List: LSE cooling For those of you with the Lightspeed ignition, how are you cooling the main box? Spruce carries several cooling fans, most with multiple ports. Is this the only answer? -------- Don A. McDonald 40636 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=251881#251881 ________________________________ Message 15 ____________________________________ Time: 04:06:54 PM PST US Subject: Re: RV10-List: oil cooling From: pilotdds@aol.com sorry wrong address -----Original Message----- From: pilotdds@aol.com Sent: Mon, Jul 13, 2009 3:41 pm Subject: RV10-List: oil cooling How are you doing with your oil temps-How is your plenum working out-was it scratch built?thanks for your input--jim -----Original Message----- From: partner14 Sent: Mon, Jul 6, 2009 10:51 pm Subject: RV10-List: LSE cooling For those of you with the Lightspeed ignition, how are you cooling the main box? Spruce carries several cooling fans, most with multiple ports. Is this the only answer? -------- Don A. McDonald 40636 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=251881#251881 ________________________________ Message 16 ____________________________________ Time: 06:56:43 PM PST US From: "John Testement" Subject: RE: RV10-List: LSE cooling What did you or others use to transition from the cooling fan tubing to the Lightspeed cooling port John Testement N311RV #40321 Flying Do not archive -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Robert Brunkenhoefer Sent: Tuesday, July 07, 2009 11:49 AM Subject: Re: RV10-List: LSE cooling --> that's what i use. hooking one port to the cooling intake port on the unit. klaus said to do it that way. robert On Jul 7, 2009, at 12:51 AM, partner14 wrote: > --> > > > For those of you with the Lightspeed ignition, how are you cooling the > main box? Spruce carries several cooling fans, most with multiple > ports. Is this the only answer? > > -------- > Don A. McDonald > 40636 > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=251881#251881 > > Checked by AVG - www.avg.com 17:55:00 ________________________________ Message 17 ____________________________________ Time: 07:52:36 PM PST US Subject: Re: RV10-List: LSE cooling From: "Condrey, Bob (US SSA)" I used a piece of 5/8" SCAT and found a nylon pipe thread to 3/8 ID barb fitting at the HW store. Then attached some 3/8 I'd tubung from there to the LSE cooling port. I actually have 2 LSEs so I put a tee in the line also. Bob ----- Original Message ----- From: owner-rv10-list-server@matronics.com Sent: Mon Jul 13 18:53:42 2009 Subject: RE: RV10-List: LSE cooling What did you or others use to transition from the cooling fan tubing to the Lightspeed cooling port John Testement N311RV #40321 Flying Do not archive -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Robert Brunkenhoefer Sent: Tuesday, July 07, 2009 11:49 AM Subject: Re: RV10-List: LSE cooling --> that's what i use. hooking one port to the cooling intake port on the unit. klaus said to do it that way. robert On Jul 7, 2009, at 12:51 AM, partner14 wrote: > --> > > > For those of you with the Lightspeed ignition, how are you cooling the > main box? Spruce carries several cooling fans, most with multiple > ports. Is this the only answer? > > -------- > Don A. McDonald > 40636 > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=251881#251881 > > Checked by AVG - www.avg.com 17:55:00 ________________________________ Message 18 ____________________________________ Time: 08:12:19 PM PST US Subject: RE: RV10-List: FW: Home available in OSH From: "John Cox" Flying company from PDX-SEA-ORD. I will get a rental car out of Chicago for the 3 hour drive north. I have an EAA Tech inspection in Manitowok on Saturday PM. Where will you be coming in? Need a lift? John From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Robin Marks Sent: Monday, July 13, 2009 11:23 AM Subject: RE: RV10-List: FW: Home available in OSH John, How are you getting to OSH? Robin From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of John Cox Sent: Monday, July 13, 2009 6:40 AM Subject: RV10-List: FW: Home available in OSH _____________________________________________ I still have a room or two available for wayward pilots or builders in Old Oshkosh. Five bedrooms, 2.5 baths, sleeps eight, Central Air Conditioning, newly remodeled S.Steel kitchen appliances, HDTV and just 5 minutes from the field. $250 for an individual or $500 for a couple from Sunday, July 26th through Sunday, August 2. John Cox - Oregon and headed to OSH '09 503-453-6016 cellular http://www.matronics.com/Navigator?RV10-List http://forums.matronics.com http://www.matronics.com/contribution Checked by AVG - www.avg.com 07/12/09 17:56:00 ________________________________ Message 19 ____________________________________ Time: 09:22:37 PM PST US From: Don McDonald Subject: Re: RV10-List: Hanger for shoulder belts? Yep, I made the hangers for both the shoulder harness and the headsets, but no headliner in my plane... at least not yet. Don McDonald N414DM - Flying - 55 hours --- On Mon, 7/13/09, karolamy@roadrunner.com wrot e: From: karolamy@roadrunner.com Subject: RV10-List: Hanger for shoulder belts? Still looking for the response to where did you get the headliner?- I bel ieve the question goes to Don McDonald who- posted the very nice picture of the hanger location that prompted the question.- Others are anxiously waiting!!! Thanks, Rich le, List Admin. =0A=0A=0A ________________________________ Message 20 ____________________________________ Time: 09:54:56 PM PST US Subject: RE: RV10-List: FW: Home available in OSH From: "Robin Marks" Still up in the air. I want to go...sort of... been traveling a lot in general and even more recently. I want to book your $250 spot because it's such a good deal but I have a pretty good idea I will not be attending OSH this year. The good news is that if I don't come this year I will definitely go in 2010. BTW the -10 is a really nice plane to fly! Robin From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of John Cox Sent: Monday, July 13, 2009 8:08 PM Subject: RE: RV10-List: FW: Home available in OSH Flying company from PDX-SEA-ORD. I will get a rental car out of Chicago for the 3 hour drive north. I have an EAA Tech inspection in Manitowok on Saturday PM. Where will you be coming in? Need a lift? John From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Robin Marks Sent: Monday, July 13, 2009 11:23 AM Subject: RE: RV10-List: FW: Home available in OSH John, How are you getting to OSH? Robin From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of John Cox Sent: Monday, July 13, 2009 6:40 AM Subject: RV10-List: FW: Home available in OSH _____________________________________________ I still have a room or two available for wayward pilots or builders in Old Oshkosh. Five bedrooms, 2.5 baths, sleeps eight, Central Air Conditioning, newly remodeled S.Steel kitchen appliances, HDTV and just 5 minutes from the field. $250 for an individual or $500 for a couple from Sunday, July 26th through Sunday, August 2. John Cox - Oregon and headed to OSH '09 503-453-6016 cellular http://www.matronics.com/Navigator?RV10-List http://forums.matronics.com http://www.matronics.com/contribution Checked by AVG - www.avg.com 07/12/09 17:56:00 http://www.matronics.com/Navigator?RV10-List http://forums.matronics.com http://www.matronics.com/contribution ________________________________ Message 21 ____________________________________ Time: 11:12:04 PM PST US Subject: RE: RV10-List: FW: Home available in OSH From: "Robin Marks" Ok, sooner or later I will learn what is going to the RV-List and what is personal communication. Sorry! Robin Do Not Archive ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.