---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Thu 08/06/09: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:16 AM - stephen saint's wing root fairing (Robert Brunkenhoefer) 2. 12:11 PM - Gretz GA-1000 Cracked (Barry Marz) 3. 12:53 PM - Re: Gretz GA-1000 Cracked (RV Builder (Michael Sausen)) 4. 04:38 PM - Seatbelt countersink (Eric_Kallio) 5. 05:24 PM - Re: Gretz GA-1000 Cracked (Bob Leffler) ________________________________ Message 1 _____________________________________ Time: 08:16:59 AM PST US From: Robert Brunkenhoefer Subject: RV10-List: stephen saint's wing root fairing how do i get a wing root fairing like the one on N256H registered to stephen saint? robert brunkenhoefer. 160 + hrs and enjoying it. 661G ________________________________ Message 2 _____________________________________ Time: 12:11:03 PM PST US From: Barry Marz Subject: RV10-List: Gretz GA-1000 Cracked I just found a 1"x1/8" crack along the bottom seam of my GA-1000 heated pitot. I have 150hr on the plane and 10-15hr using the heat on the pitot. Talked to Warren Gretz and the best he could come up with was to patch it with J&B Weld. Emailed the new producers of the GA-1000 but no response. It still heats up, but I'm going to replace it. Just wanted to give everyone a heads up. Blue Skys Barry Marz 18735 Baseleg AVE. FT. Myers, Fl 33917 239-567-2271 blalmarz@embarqmail.com ________________________________ Message 3 _____________________________________ Time: 12:53:14 PM PST US From: "RV Builder (Michael Sausen)" Subject: RE: RV10-List: Gretz GA-1000 Cracked Given the fact that it's just a thermoplastic with basically an embedded element and thermistor, you should be able to fix it just fine with some JB Weld or similar. IMHO Michael -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Barry Marz Sent: Thursday, August 06, 2009 1:54 PM Subject: RV10-List: Gretz GA-1000 Cracked I just found a 1"x1/8" crack along the bottom seam of my GA-1000 heated pitot. I have 150hr on the plane and 10-15hr using the heat on the pitot. Talked to Warren Gretz and the best he could come up with was to patch it with J&B Weld. Emailed the new producers of the GA-1000 but no response. It still heats up, but I'm going to replace it. Just wanted to give everyone a heads up. Blue Skys Barry Marz 18735 Baseleg AVE. FT. Myers, Fl 33917 239-567-2271 blalmarz@embarqmail.com ________________________________ Message 4 _____________________________________ Time: 04:38:45 PM PST US Subject: RV10-List: Seatbelt countersink From: "Eric_Kallio" Anyone have a list for the seatbelt countersink? I am just about to the point where I will need to buy it if I can't get my hands on one. Thanks. Eric Kallio Read this topic online here: http://forums.matronics.com/viewtopic.php?p=256434#256434 ________________________________ Message 5 _____________________________________ Time: 05:24:01 PM PST US From: "Bob Leffler" Subject: RE: RV10-List: Gretz GA-1000 Cracked I had to have my pitot replaced via warranty. It had a short between one of the thermistor leads and ground. Andrew takes awhile to respond. I got the impression that he only reads his email on a periodic basis. I found I got a quicker response by giving him a call. Just remember that he's 14 hours ahead. He's good to deal with, just not responsive via email. Bob -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of RV Builder (Michael Sausen) Sent: Thursday, August 06, 2009 3:52 PM Subject: RE: RV10-List: Gretz GA-1000 Cracked Given the fact that it's just a thermoplastic with basically an embedded element and thermistor, you should be able to fix it just fine with some JB Weld or similar. IMHO Michael -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Barry Marz Sent: Thursday, August 06, 2009 1:54 PM Subject: RV10-List: Gretz GA-1000 Cracked I just found a 1"x1/8" crack along the bottom seam of my GA-1000 heated pitot. I have 150hr on the plane and 10-15hr using the heat on the pitot. Talked to Warren Gretz and the best he could come up with was to patch it with J&B Weld. Emailed the new producers of the GA-1000 but no response. It still heats up, but I'm going to replace it. Just wanted to give everyone a heads up. Blue Skys Barry Marz 18735 Baseleg AVE. FT. Myers, Fl 33917 239-567-2271 blalmarz@embarqmail.com ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.