---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Fri 09/04/09: 10 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:11 AM - Free Wing Cradles (Dawson-Townsend,Timothy) 2. 09:41 AM - Re: Free Wing Cradles (Steve Stella) 3. 09:41 AM - Re: Free Wing Cradles (Steve Stella) 4. 10:12 AM - Re: Re: A kid.. Really?? (Tim Olson) 5. 10:46 AM - Re: Re: A kid.. Really?? (Jeff Carpenter) 6. 10:54 AM - Re: Free Wing Cradles (william@gbta.net) 7. 11:45 AM - Removing masking tape residue from plexiglass (Dawson-Townsend,Timothy) 8. 11:55 AM - Re: Removing masking tape residue from plexiglass (gary) 9. 12:47 PM - Re: Removing masking tape residue from plexiglass (Rob Kochman) 10. 02:06 PM - Re: Removing masking tape residue from plexiglass (Linn Walters) ________________________________ Message 1 _____________________________________ Time: 09:11:35 AM PST US Subject: RV10-List: Free Wing Cradles From: "Dawson-Townsend,Timothy" Anyone want 'em? They're in eastern Massachusetts, however . . . TDT Tim Dawson-Townsend 40025 tdt@aurora.aero 617-500-4812 (office) 617-905-4800 (mobile) ________________________________ Message 2 _____________________________________ Time: 09:41:03 AM PST US From: "Steve Stella" Subject: RE: RV10-List: Free Wing Cradles Where in eastern Mass? Steven Stella #40654 Wings N521RV reserved _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Dawson-Townsend,Timothy Sent: Friday, September 04, 2009 12:08 PM Subject: RV10-List: Free Wing Cradles Anyone want 'em? They're in eastern Massachusetts, however . . . TDT Tim Dawson-Townsend 40025 tdt@aurora.aero 617-500-4812 (office) 617-905-4800 (mobile) ________________________________ Message 3 _____________________________________ Time: 09:41:28 AM PST US From: "Steve Stella" Subject: RE: RV10-List: Free Wing Cradles I'll take them. I'm in central Mass around Sturbridge. Give me a call on my cell 508-989-1974 Steve Stella #40654 Wings N521RV reserved _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Dawson-Townsend,Timothy Sent: Friday, September 04, 2009 12:08 PM Subject: RV10-List: Free Wing Cradles Anyone want 'em? They're in eastern Massachusetts, however . . . TDT Tim Dawson-Townsend 40025 tdt@aurora.aero 617-500-4812 (office) 617-905-4800 (mobile) ________________________________ Message 4 _____________________________________ Time: 10:12:36 AM PST US From: Tim Olson Subject: Re: RV10-List: Re: A kid.. Really?? Awesome, Bill. Isn't it funny.... not only is a kid much more complex than an airplane in construction, but it's WAY easier and more fun to make than an airplane too! Not only that but usually when you ding them a little, they repair on their own. :) Tim Olson - RV-10 N104CD do not archive Bill and Tami Britton wrote: > While we're on the subject of new family members I thought I'd throw in > mine. Add 1 more to the family. Bristol Ashlyn was born on Aug. 28. 5 > lbs. 9 ozs. and 6 weeks early. Spent 5 days in Wichita KS at Wesley med > center in the NICU for preemies. Back closer to home at Great Bend, KS > hospital now and doing great. Her 8 year old brother and 5 year old > sister finally got to play with and hold her for a little bit tonight. > AWESOME doesn't even come close to describing how mom and I feel right > now. Hope I feel close to the same excitement if I ever get my -10 > done!!!!! > > By the way, do not archive!!!!! > > Back to RV's. > > Bill Britton > RV-10 wings > > Oh yeah, anybody that's installed a bench seat in the rear got any > suggestions/pictures for me??? > > ----- Original Message ----- From: "nukeflyboy" > To: > Sent: Monday, August 31, 2009 4:37 PM > Subject: RV10-List: Re: A kid.. Really?? > > >> >> Phil, >> Congratulations! You are about to embark on the most rewarding and >> challenging adventure in your life. You have no idea, but that little >> 7 lb bundle will be the center of your universe for quite a while. It >> is a journey worth doing well. >> >> Building a RV-10 and fatherhood are not totally incompatible, but you >> should expect the airplane to take a serious back seat. If you want >> to keep them, then the family will have to come first. I started my >> RV-6 in 1992 when my 2 daughters were 7 and 9. Working on the 6 was >> my hobby and stress reliever, but the family always came first. >> Result: 8 years and 3 months to build. >> >> My advice is to keep building but make it a low second priority. The >> kit will wait, forget about completion schedules, and just look at >> building as an alternative to golf or television. >> >> -------- >> Dave Moore >> RV-6 flying >> RV-10 QB - cabin top/fiberglass hell >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=260696#260696 >> >> >> >> >> >> >> >> >> >> > > > -------------------------------------------------------------------------------- > > > > > Checked by AVG - www.avg.com > 05:50:00 > > ------------------------------------------------------------------------ > > > ------------------------------------------------------------------------ > ________________________________ Message 5 _____________________________________ Time: 10:46:08 AM PST US From: Jeff Carpenter Subject: Re: RV10-List: Re: A kid.. Really?? I love all the practice that goes in to making a kid. On Sep 4, 2009, at 10:02 AM, Tim Olson wrote: > > Awesome, Bill. Isn't it funny.... not only is a kid much more > complex than an airplane in construction, but it's WAY easier > and more fun to make than an airplane too! Not only that but > usually when you ding them a little, they repair on their own. :) > > Tim Olson - RV-10 N104CD > do not archive > > > Bill and Tami Britton wrote: >> While we're on the subject of new family members I thought I'd >> throw in mine. Add 1 more to the family. Bristol Ashlyn was born >> on Aug. 28. 5 lbs. 9 ozs. and 6 weeks early. Spent 5 days in >> Wichita KS at Wesley med center in the NICU for preemies. Back >> closer to home at Great Bend, KS hospital now and doing great. Her >> 8 year old brother and 5 year old sister finally got to play with >> and hold her for a little bit tonight. AWESOME doesn't even come >> close to describing how mom and I feel right now. Hope I feel >> close to the same excitement if I ever get my -10 done!!!!! >> By the way, do not archive!!!!! >> Back to RV's. >> Bill Britton >> RV-10 wings >> Oh yeah, anybody that's installed a bench seat in the rear got any >> suggestions/pictures for me??? >> ----- Original Message ----- From: "nukeflyboy" >> >> To: >> Sent: Monday, August 31, 2009 4:37 PM >> Subject: RV10-List: Re: A kid.. Really?? >>> >>> Phil, >>> Congratulations! You are about to embark on the most rewarding >>> and challenging adventure in your life. You have no idea, but >>> that little 7 lb bundle will be the center of your universe for >>> quite a while. It is a journey worth doing well. >>> >>> Building a RV-10 and fatherhood are not totally incompatible, but >>> you should expect the airplane to take a serious back seat. If >>> you want to keep them, then the family will have to come first. I >>> started my RV-6 in 1992 when my 2 daughters were 7 and 9. Working >>> on the 6 was my hobby and stress reliever, but the family always >>> came first. Result: 8 years and 3 months to build. >>> >>> My advice is to keep building but make it a low second priority. >>> The kit will wait, forget about completion schedules, and just >>> look at building as an alternative to golf or television. >>> >>> -------- >>> Dave Moore >>> RV-6 flying >>> RV-10 QB - cabin top/fiberglass hell >>> >>> >>> >>> >>> Read this topic online here: >>> >>> http://forums.matronics.com/viewtopic.php?p=260696#260696 >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >> -------------------------------------------------------------------------------- Checked >> by AVG - www.avg.com >> 05:50:00 >> ------------------------------------------------------------------------ >> ------------------------------------------------------------------------ > > ________________________________ Message 6 _____________________________________ Time: 10:54:00 AM PST US From: "william@gbta.net" Subject: Re: RV10-List: Free Wing Cradles I'd love them but I'm in Kansas! Bill Britton -- Sent from my Palm Pre Dawson-Townsend,Timothy wrote: Anyone want =98em?=C2- They=99re in eastern Massachusetts, however . . . =C2- TDT =C2- Tim Dawson-Townsend 40025 tdt@aurora.aero 617-500-4812 (office) 617-905-4800 (mobile) =C2- ________________________________ Message 7 _____________________________________ Time: 11:45:06 AM PST US Subject: RV10-List: Removing masking tape residue from plexiglass From: "Dawson-Townsend,Timothy" What's the best stuff to use to remove masking tape residue from plexiglass, as in windows? TDT Tim Dawson-Townsend 40025 tdt@aurora.aero 617-500-4812 (office) 617-905-4800 (mobile) ________________________________ Message 8 _____________________________________ Time: 11:55:08 AM PST US From: "gary" Subject: RE: RV10-List: Removing masking tape residue from plexiglass Mineral Spirits or Naptha Gary Specketer _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Dawson-Townsend,Timothy Sent: Friday, September 04, 2009 1:26 PM Subject: RV10-List: Removing masking tape residue from plexiglass What's the best stuff to use to remove masking tape residue from plexiglass, as in windows? TDT Tim Dawson-Townsend 40025 tdt@aurora.aero 617-500-4812 (office) 617-905-4800 (mobile) ________________________________ Message 9 _____________________________________ Time: 12:47:40 PM PST US Subject: Re: RV10-List: Removing masking tape residue from plexiglass From: Rob Kochman Van's told me to use isopropyl alcohol On Fri, Sep 4, 2009 at 11:50 AM, gary wrote: > Mineral Spirits or Naptha > > > Gary Specketer > > > ------------------------------ > > *From:* owner-rv10-list-server@matronics.com [mailto: > owner-rv10-list-server@matronics.com] *On Behalf Of * > Dawson-Townsend,Timothy > *Sent:* Friday, September 04, 2009 1:26 PM > *To:* rv10-list@matronics.com > *Subject:* RV10-List: Removing masking tape residue from plexiglass > > > What=92s the best stuff to use to remove masking tape residue from > plexiglass, as in windows? > > > TDT > > > Tim Dawson-Townsend > > 40025 > > tdt@aurora.aero > > 617-500-4812 (office) > > 617-905-4800 (mobile) > > > * * > > * * > > ** > > ** > > ** > > *http://www.matronics.com/Navigator?RV10-List* > > ** > > ** > > *http://forums.matronics.com* > > ** > > ** > > *http://www.matronics.com/contribution* > > * * > > * > =========== =========== =========== =========== > * > > -- Rob Kochman RV-10 Wings Woodinville, WA (near Seattle) http://kochman.net/N819K ________________________________ Message 10 ____________________________________ Time: 02:06:59 PM PST US From: Linn Walters Subject: Re: RV10-List: Removing masking tape residue from plexiglass Kerosene. lay a towel over the spot and keep damp. It'll peel off well if you're patient and keep it 'damp' long enough. Linn Dawson-Townsend,Timothy wrote: > Whats the best stuff to use to remove masking tape residue from > plexiglass, as in windows? > > > > TDT > > > > Tim Dawson-Townsend > > 40025 > > tdt@aurora.aero > > 617-500-4812 (office) > > 617-905-4800 (mobile) > > > > * > > > * ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.