---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Fri 09/18/09: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:47 AM - Re: Re: LOP (Lean of Peak) Injector Tuning (Don McDonald) 2. 04:03 PM - Re: LOP (Lean of Peak) Injector Tuning (Bob Turner) 3. 08:58 PM - CB-1002-H Governor Bracket Installation Photos...? (Matt Dralle) 4. 09:30 PM - Re: CB-1002-H Governor Bracket Installation Photos...? (Lenny Iszak) 5. 09:48 PM - Re: CB-1002-H Governor Bracket Installation Photos...? (Brian) ________________________________ Message 1 _____________________________________ Time: 08:47:58 AM PST US From: Don McDonald Subject: RE: RV10-List: Re: LOP (Lean of Peak) Injector Tuning Does anyone have a picture of this "air dam". Thanks, Don- --- On Thu, 9/17/09, gary wrote: From: gary Subject: RE: RV10-List: Re: LOP (Lean of Peak) Injector Tuning I have the standard inlets, but based on this list and Alan Barrett's recommendation I put a small air dam in front of the front injector. Raining down here this week so have not flown.- Will keep you posted. Gary Specketer -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Tim Olson Sent: Thursday, September 17, 2009 3:17 AM Subject: Re: RV10-List: Re: LOP (Lean of Peak) Injector Tuning I think on either....- The issue is seemingly with the airflow blast coming in the round inlets, over the injectors.- A small air dam to lessen the direct flow changed things a lot. More info coming in the future... Tim Olson - RV-10 N104CD do not archive N777TY wrote: > > which James cowl? The regular one or the one for cold air induction? > they're slightly different.. > > just helped my buddy go through the hoops of getting the injectors > tuned, and results seem to be good.. this is on a -10 /w James cowl + > BPE cold air engine.. (2 mags... for now) > > -------- RV-7A N777TY > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=263230#263230 > le, List Admin. //mail.yahoo.com ________________________________ Message 2 _____________________________________ Time: 04:03:13 PM PST US Subject: RV10-List: Re: LOP (Lean of Peak) Injector Tuning From: "Bob Turner" There's a photo about 6 posts up. -------- Bob Turner RV-10 QB Read this topic online here: http://forums.matronics.com/viewtopic.php?p=263740#263740 ________________________________ Message 3 _____________________________________ Time: 08:58:52 PM PST US From: Matt Dralle Subject: RV10-List: CB-1002-H Governor Bracket Installation Photos...? Dear Listers, Van's turned me on to a bracket for the RV-10 called the CB-1002-H which is a bracket for mounting the governor control cable on front mounted governors. Does anyone have some good pictures of how this bracket is installed? Maybe even a scan of the baffling installation OP sheet where the RV-10 baffling is described? Since the IO-390 has a front mounted governor similar to the IO-540 used on the RV-10, some of these baffling pieces seem to work. Any docs you could provide would be most appreciated! Matt Dralle RV-8 #82880 N998RV http://www.mattsrv8.com - Matt's RV-8 Construction Blog Engine Baffling... ________________________________ Message 4 _____________________________________ Time: 09:30:07 PM PST US Subject: RV10-List: Re: CB-1002-H Governor Bracket Installation Photos...? From: "Lenny Iszak" Matt, See if this helps. Lenny Read this topic online here: http://forums.matronics.com/viewtopic.php?p=263786#263786 Attachments: http://forums.matronics.com//files/baffle_346.jpg ________________________________ Message 5 _____________________________________ Time: 09:48:36 PM PST US From: "Brian" Subject: RE: RV10-List: CB-1002-H Governor Bracket Installation Photos...? Hope this helps...lower left of the photo. -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Matt Dralle Sent: Friday, September 18, 2009 10:58 PM rv7-list@matronics.com Subject: RV10-List: CB-1002-H Governor Bracket Installation Photos...? Dear Listers, Van's turned me on to a bracket for the RV-10 called the CB-1002-H which is a bracket for mounting the governor control cable on front mounted governors. Does anyone have some good pictures of how this bracket is installed? Maybe even a scan of the baffling installation OP sheet where the RV-10 baffling is described? Since the IO-390 has a front mounted governor similar to the IO-540 used on the RV-10, some of these baffling pieces seem to work. Any docs you could provide would be most appreciated! Matt Dralle RV-8 #82880 N998RV http://www.mattsrv8.com - Matt's RV-8 Construction Blog Engine Baffling... ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.