RV10-List Digest Tue 10/27/09

RV10-List Digest Archive

Tue 10/27/09

Total Messages Posted: 19



Today's Message Index:
----------------------
 
     1. 04:52 AM - Re: Re: Firewall wiring/cable routing (David McNeill)
     2. 06:38 AM - Re: Re: Firewall wiring/cable routing (Miller John)
     3. 08:54 AM - Re: Door Pin - Idea (Miller John)
     4. 10:11 AM - Re: Door Pin - Idea (Dave Saylor)
     5. 01:56 PM - N829GW Maiden flight (aerosport1)
     6. 02:01 PM - Re: N829GW Maiden flight (Condrey, Bob (US SSA))
     7. 02:35 PM - Re: N829GW Maiden flight (Jeff Carpenter)
     8. 02:45 PM - Re: N829GW Maiden flight (Fred Williams, M.D.)
     9. 02:54 PM - Re: N829GW Maiden flight (Geoff Combs)
    10. 03:05 PM - Re: N829GW Maiden flight (Deems Davis)
    11. 03:29 PM - Re: N829GW Maiden flight (Robin Marks)
    12. 03:39 PM - Re: N829GW Maiden flight (Bill Mauledriver Watson)
    13. 03:54 PM - Re: N829GW Maiden flight (ricksked@embarqmail.com)
    14. 05:21 PM - Re: N829GW Maiden flight (Lenny Iszak)
    15. 05:41 PM - Re: N829GW Maiden flight (Tim Olson)
    16. 06:13 PM - Re: N829GW Maiden flight (Les Kearney)
    17. 07:08 PM - Re: N829GW Maiden flight (Kelly McMullen)
    18. 08:22 PM - Re: N829GW Maiden flight (Don McDonald)
    19. 09:02 PM - Re: N829GW Maiden flight (AirMike)
 
 
 

Message 1


					INDEX  Back to Main INDEX
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 04:52:29 AM PST US
From: "David McNeill" <dlm46007@cox.net>
Subject: Re: Firewall wiring/cable routing      
      The glare shield holes (both sides) are for easy access to the backside of
      the panel. At my age standing on one's head for the time required to
      disconnected the EFIS connectors is unacceptable. I hold those panels in
      with cap screws so that the can be removed with an Allen wrench after the
      windscreen is installed as my panel is not removable (in sections) .   
        _____  
      
      From: owner-rv10-list-server@matronics.com
      [mailto:owner-rv10-list-server@matronics.com] On Behalf Of John Gonzalez
      Sent: Monday, October 26, 2009 9:07 PM
      Subject: RE: RV10-List: Re: Firewall wiring/cable routing
      
      
      I never understood that either as after the windscreen is on there is no
      room to actually get your hands, arms or head in there to work on the
      avionics. Perhaps a removable windscreen is in development. 
      
      > Subject: RV10-List: Re: Firewall wiring/cable routing
      > From: johngoodman@earthlink.net
      > Date: Mon, 26 Oct 2009 19:27:58 -0700
      > To: rv10-list@matronics.com
      > 
      > 
      > OK, I've gotta ask - is the hole in the glareshield for GPS? Or, the
      world's biggest defrost?
      > John
      > 
      > --------
      > #40572 QB Fuselage, wings finished. Finish Kit progressing. Engine &amp;
      Panel delivery soon.
      > N711JG reserved
      > 
      > 
      > 
      > 
      > Read this topic online here:
      > 
      > http://forums.matronics.com/viewtopic.php?p=269596#269596
      > 
      > 
      > 
      > 
      > 
      > 
      > 
      
      

Message 2


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 06:38:07 AM PST US
From: Miller John <gengrumpy@aol.com>
Subject: Re: Firewall wiring/cable routing      
      Dave,
      
      I'm going to keep those baggage compartment tie downs.
      
      Remind me how much they were and I'll send a check.
      
      Thanks - John
      
      On Oct 27, 2009, at 6:51 AM, David McNeill wrote:
      
      > The glare shield holes (both sides) are for easy access to the  
      > backside of the panel. At my age standing on one's head for the time  
      > required to disconnected the EFIS connectors is unacceptable. I hold  
      > those panels in with cap screws so that the can be removed with an  
      > Allen wrench after the windscreen is installed as my panel is not  
      > removable (in sections) .
      > From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com 
      > ] On Behalf Of John Gonzalez
      > Sent: Monday, October 26, 2009 9:07 PM
      > To: RV 10 group
      > Subject: RE: RV10-List: Re: Firewall wiring/cable routing
      >
      > I never understood that either as after the windscreen is on there  
      > is no room to actually get your hands, arms or head in there to work  
      > on the avionics. Perhaps a removable windscreen is in development.
      >
      > > Subject: RV10-List: Re: Firewall wiring/cable routing
      > > From: johngoodman@earthlink.net
      > > Date: Mon, 26 Oct 2009 19:27:58 -0700
      > > To: rv10-list@matronics.com
      > >
      > >
      > >
      > > OK, I've gotta ask - is the hole in the glareshield for GPS? Or,  
      > the world's biggest defrost?
      > > John
      > >
      > > --------
      > > #40572 QB Fuselage, wings finished. Finish Kit progressing. Engine  
      > &amp; Panel delivery soon.
      > > N711JG reserved
      > >
      > >
      > >
      > >
      > > Read this topic online here:
      > >
      > > http://forums.matronics.com/viewtopic.php?p=269596#269596
      > >
      > >
      > >
      > >
      > >
      > >
      > >
      >
      >
      > href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List
      > href="http://forums.matronics.com">http://forums.matronics.com
      > href="http://www.matronics.com/contribution">http:// 
      > www.matronics.com/c
      >
      >
      
      

Message 3


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 08:54:46 AM PST US
From: Miller John <gengrumpy@aol.com>
Subject: Re: Door Pin - Idea      
      Dave,
      
      I'm going to keep the tie downs.
      
      Will get a check in the mail to you today.
      
      Thanks - grumpy
      
      On Oct 6, 2009, at 12:34 PM, Dave Saylor wrote:
      
      > Fifth item down:
      >
      > http://www.aircraftersllc.com/products.htm
      >
      > Dave Saylor
      > AirCrafters LLC
      > 140 Aviation Way
      > Watsonville, CA 95076
      > 831-722-9141 Shop
      > 831-750-0284 Cell
      >
      >
      > On Tue, Oct 6, 2009 at 9:56 AM, Miller John <gengrumpy@aol.com> wrote:
      > It would be nice to have a metal block the exact same size as the  
      > nylon one for retrofit.
      >
      > The bullet and block would not retrofit to my door.....
      >
      > grumpy
      > N184JM
      >
      > Do not archive
      >
      >
      
      

Message 4


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 10:11:31 AM PST US
Subject: Re: Door Pin - Idea
From: Dave Saylor <dave.saylor.aircrafters@gmail.com>      
      Thanks, John.
      
      Dave Saylor
      AirCrafters LLC
      140 Aviation Way
      Watsonville, CA 95076
      831-722-9141 Shop
      831-750-0284 Cell
      
      
      On Tue, Oct 27, 2009 at 8:48 AM, Miller John <gengrumpy@aol.com> wrote:
      
      > Dave,
      >
      > I'm going to keep the tie downs.
      >
      > Will get a check in the mail to you today.
      >
      > Thanks - grumpy
      >
      > On Oct 6, 2009, at 12:34 PM, Dave Saylor wrote:
      >
      > Fifth item down:
      >
      > http://www.aircraftersllc.com/products.htm
      >
      > Dave Saylor
      > AirCrafters LLC
      > 140 Aviation Way
      > Watsonville, CA 95076
      > 831-722-9141 Shop
      > 831-750-0284 Cell
      >
      >
      > On Tue, Oct 6, 2009 at 9:56 AM, Miller John <gengrumpy@aol.com> wrote:
      >
      >> It would be nice to have a metal block the exact same size as the nylon
      >> one for retrofit.
      >>
      >> The bullet and block would not retrofit to my door.....
      >>
      >> grumpy
      >> N184JM
      >>
      >> Do not archive
      >
      > *
      >
      > ===================================
      > tp://www.matronics.com/Navigator?RV10-List
      > ====================================nics.com
      > ====================================w.matronics.com/contribution
      > ===================================
      > *
      >
      >
      > 
      >
      > *
      >
      > *
      >
      >
      

Message 5


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 01:56:03 PM PST US
Subject: N829GW Maiden flight
From: "aerosport1" <g.combs@aerosportmodeling.com>      
      
      After 2 years and 20 days.
      
      On 10-26-09  at 4:30 PM N829GW took it's maiden flight with myself at the controls.
      I flew for 40 minutes and all went well. I now need to fly off 40 hours before
      I can start taking trips and passengers. And then My wife's honey dew list
      kicks into high gear. 
      That RVgrin just keeps giving and giving
      What a great airplane
      
      Geoff
      
      --------
      Geoff Combs
       RV-10 QB N829GW
      Finishing
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=269702#269702
      
      
      Attachments: 
      
      http://forums.matronics.com//files/air1_107.jpg
      http://forums.matronics.com//files/landg_n829gw_671.jpg
      http://forums.matronics.com//files/panel2_806.jpg
      http://forums.matronics.com//files/rvgrin_528.jpg
      http://forums.matronics.com//files/right_n829gw_162.jpg
      
      

Message 6


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 02:01:21 PM PST US
From: "Condrey, Bob (US SSA)" <bob.condrey@baesystems.com>
Subject: N829GW Maiden flight      
      
      Congratulations!
      
      Bob
      
      -----Original Message-----
      From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of aerosport1
      Sent: Tuesday, October 27, 2009 3:53 PM
      Subject: RV10-List: N829GW Maiden flight
      
      
      After 2 years and 20 days.
      
      On 10-26-09  at 4:30 PM N829GW took it's maiden flight with myself at the controls.
      I flew for 40 minutes and all went well. I now need to fly off 40 hours before
      I can start taking trips and passengers. And then My wife's honey dew list
      kicks into high gear. 
      That RVgrin just keeps giving and giving
      What a great airplane
      
      Geoff
      
      --------
      Geoff Combs
       RV-10 QB N829GW
      Finishing
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=269702#269702
      
      
      Attachments: 
      
      http://forums.matronics.com//files/air1_107.jpg
      http://forums.matronics.com//files/landg_n829gw_671.jpg
      http://forums.matronics.com//files/panel2_806.jpg
      http://forums.matronics.com//files/rvgrin_528.jpg
      http://forums.matronics.com//files/right_n829gw_162.jpg
      
      

Message 7


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 02:35:18 PM PST US
From: Jeff Carpenter <jeff@westcottpress.com>
Subject: Re: N829GW Maiden flight      
      
      Wow!... that is one gorgeous airplane.
      
      
      On Oct 27, 2009, at 1:52 PM, aerosport1 wrote:
      
      > >
      >
      > After 2 years and 20 days.
      >
      > On 10-26-09  at 4:30 PM N829GW took it's maiden flight with myself  
      > at the controls. I flew for 40 minutes and all went well. I now need  
      > to fly off 40 hours before I can start taking trips and passengers.  
      > And then My wife's honey dew list kicks into high gear.
      > That RVgrin just keeps giving and giving
      > What a great airplane
      >
      > Geoff
      >
      > --------
      > Geoff Combs
      > RV-10 QB N829GW
      > Finishing
      >
      >
      > Read this topic online here:
      >
      > http://forums.matronics.com/viewtopic.php?p=269702#269702
      >
      >
      > Attachments:
      >
      > http://forums.matronics.com//files/air1_107.jpg
      > http://forums.matronics.com//files/landg_n829gw_671.jpg
      > http://forums.matronics.com//files/panel2_806.jpg
      > http://forums.matronics.com//files/rvgrin_528.jpg
      > http://forums.matronics.com//files/right_n829gw_162.jpg
      >
      >
      
      

Message 8


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 02:45:16 PM PST US
From: "Fred Williams, M.D." <drfred@suddenlinkmail.com>
Subject: Re: N829GW Maiden flight      
      
      Geoff:
      
      Sweet looking airplane.   What's the back round city?
      
      Congrats. 
      
      Dr Fred.
      N515 FW
      180 hrs
      >
      >
      >   
      
      

Message 9


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 02:54:33 PM PST US
From: "Geoff Combs" <g.combs@aerosportmodeling.com>
Subject: N829GW Maiden flight      
      
      That is Columbus Ohio
      
      Geoff Combs
      President
      Aerosport Modeling & Design
      8090 Howe Industrial Parkway 
      Canal Winchester, Ohio 43110
      614-834-5227p
      614-834-5230f
      www.aerosportmodeling.com
      
      
      -----Original Message-----
      From: owner-rv10-list-server@matronics.com
      [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Fred Williams,
      M.D.
      Sent: Tuesday, October 27, 2009 5:34 PM
      Subject: Re: RV10-List: N829GW Maiden flight
      
      
      --> <drfred@suddenlinkmail.com>
      
      Geoff:
      
      Sweet looking airplane.   What's the back round city?
      
      Congrats. 
      
      Dr Fred.
      N515 FW
      180 hrs
      >
      >
      >   
      
      

Message 10


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 03:05:32 PM PST US
From: Deems Davis <deemsdavis@cox.net>
Subject: Re: N829GW Maiden flight      
      
      I've been waiting for the News , Great Job Geoff!
      
      Deems Davis
      N519PJ
      www.deemsrv10.com
      
      aerosport1 wrote:
      >
      > After 2 years and 20 days.
      >  
      > On 10-26-09  at 4:30 PM N829GW took it's maiden flight with myself at the controls.
      I flew for 40 minutes and all went well. I now need to fly off 40 hours
      before I can start taking trips and passengers. And then My wife's honey dew
      list kicks into high gear. 
      > That RVgrin just keeps giving and giving
      > What a great airplane
      >
      > Geoff
      >
      > --------
      > Geoff Combs
      >  RV-10 QB N829GW
      > Finishing
      >
      >
      > Read this topic online here:
      >
      > http://forums.matronics.com/viewtopic.php?p=269702#269702
      >
      >
      > Attachments: 
      >
      > http://forums.matronics.com//files/air1_107.jpg
      > http://forums.matronics.com//files/landg_n829gw_671.jpg
      > http://forums.matronics.com//files/panel2_806.jpg
      > http://forums.matronics.com//files/rvgrin_528.jpg
      > http://forums.matronics.com//files/right_n829gw_162.jpg
      >
      >
      >   
      
      

Message 11


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 03:29:15 PM PST US
Subject: N829GW Maiden flight
From: "Robin Marks" <robin1@mrmoisture.com>      
      
      Fantastic news and a beautiful aircraft! Enjoy your Phase 1.
      
      Robin
      
      Do Not Archive
      
      

Message 12


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 03:39:21 PM PST US
From: Bill Mauledriver Watson <MauleDriver@nc.rr.com>
Subject: Re: N829GW Maiden flight      
      
      Looks Fantastic!  Congratulations.
      
      Bill Watson
      
      aerosport1 wrote:
      >
      > After 2 years and 20 days.
      >  
      > On 10-26-09  at 4:30 PM N829GW took it's maiden flight with myself at the controls.
      I flew for 40 minutes and all went well. I now need to fly off 40 hours
      before I can start taking trips and passengers. And then My wife's honey dew
      list kicks into high gear. 
      > That RVgrin just keeps giving and giving
      > What a great airplane
      >
      > Geoff
      >
      > --------
      > Geoff Combs
      >  RV-10 QB N829GW
      > Finishing
      >
      >
      > Read this topic online here:
      >
      > http://forums.matronics.com/viewtopic.php?p=269702#269702
      >
      >
      > Attachments: 
      >
      > http://forums.matronics.com//files/air1_107.jpg
      > http://forums.matronics.com//files/landg_n829gw_671.jpg
      > http://forums.matronics.com//files/panel2_806.jpg
      > http://forums.matronics.com//files/rvgrin_528.jpg
      > http://forums.matronics.com//files/right_n829gw_162.jpg
      >
      >
      >   
      
      

Message 13


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 03:54:09 PM PST US
Subject: Re: N829GW Maiden flight
From: ricksked@embarqmail.com      
      
      Geoff,
      
      Great job....how much rudder trim did you use if any...I copied your system 
      
      Rick S.
      N246RS
      65 hours and climbing 
      ------Original Message------
      From: Geoff Combs
      Sender: owner-rv10-list-server@matronics.com
      ReplyTo: Rv
      Sent: Oct 27, 2009 2:51 PM
      Subject: RE: RV10-List: N829GW Maiden flight
      
      
      That is Columbus Ohio
      
      Geoff Combs
      President
      Aerosport Modeling & Design
      8090 Howe Industrial Parkway 
      Canal Winchester, Ohio 43110
      614-834-5227p
      614-834-5230f
      www.aerosportmodeling.com
      
      
      -----Original Message-----
      From: owner-rv10-list-server@matronics.com
      [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Fred Williams,
      M.D.
      Sent: Tuesday, October 27, 2009 5:34 PM
      Subject: Re: RV10-List: N829GW Maiden flight
      
      
      --> <drfred@suddenlinkmail.com>
      
      Geoff:
      
      Sweet looking airplane.   What's the back round city?
      
      Congrats. 
      
      Dr Fred.
      N515 FW
      180 hrs
      >
      >
      >   
      
      
      Sent via BlackBerry by AT&T
      
      

Message 14


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 05:21:23 PM PST US
Subject: Re: N829GW Maiden flight
From: "Lenny Iszak" <lenard@rapiddecision.com>      
      
      Congrats Geoff!
      The paint job is awesome!
      
      Enjoy your flyoff!
      
      Lenny
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=269751#269751
      
      

Message 15


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 05:41:58 PM PST US
From: Tim Olson <Tim@MyRV10.com>
Subject: Re: N829GW Maiden flight      
      
      Beautiful! What a great day!
      Tim Olson - RV-10 N104CD
      do not archive
      
      
      aerosport1 wrote:
      > 
      > After 2 years and 20 days.
      >  
      > On 10-26-09  at 4:30 PM N829GW took it's maiden flight with myself at the controls.
      I flew for 40 minutes and all went well. I now need to fly off 40 hours
      before I can start taking trips and passengers. And then My wife's honey dew
      list kicks into high gear. 
      > That RVgrin just keeps giving and giving
      > What a great airplane
      > 
      > Geoff
      > 
      > --------
      > Geoff Combs
      >  RV-10 QB N829GW
      > Finishing
      > 
      > 
      > 
      > 
      > Read this topic online here:
      > 
      > http://forums.matronics.com/viewtopic.php?p=269702#269702
      > 
      > 
      > 
      > 
      > Attachments: 
      > 
      > http://forums.matronics.com//files/air1_107.jpg
      > http://forums.matronics.com//files/landg_n829gw_671.jpg
      > http://forums.matronics.com//files/panel2_806.jpg
      > http://forums.matronics.com//files/rvgrin_528.jpg
      > http://forums.matronics.com//files/right_n829gw_162.jpg
      > 
      > 
      > 
      > 
      > 
      > 
      > 
      
      

Message 16


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 06:13:02 PM PST US
From: "Les Kearney" <kearney@shaw.ca>
Subject: N829GW Maiden flight      
      
      Geoff
      
      That is a very nice bit of kit.
      
      Congrats
      
      Les
      
      -----Original Message-----
      From: owner-rv10-list-server@matronics.com
      [mailto:owner-rv10-list-server@matronics.com] On Behalf Of aerosport1
      Sent: October-27-09 2:53 PM
      Subject: RV10-List: N829GW Maiden flight
      
      <g.combs@aerosportmodeling.com>
      
      After 2 years and 20 days.
      
      On 10-26-09  at 4:30 PM N829GW took it's maiden flight with myself at the
      controls. I flew for 40 minutes and all went well. I now need to fly off 40
      hours before I can start taking trips and passengers. And then My wife's
      honey dew list kicks into high gear. 
      That RVgrin just keeps giving and giving
      What a great airplane
      
      Geoff
      
      --------
      Geoff Combs
       RV-10 QB N829GW
      Finishing
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=269702#269702
      
      
      Attachments: 
      
      http://forums.matronics.com//files/air1_107.jpg
      http://forums.matronics.com//files/landg_n829gw_671.jpg
      http://forums.matronics.com//files/panel2_806.jpg
      http://forums.matronics.com//files/rvgrin_528.jpg
      http://forums.matronics.com//files/right_n829gw_162.jpg
      
      

Message 17


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 07:08:04 PM PST US
Subject: Re: N829GW Maiden flight
From: Kelly McMullen <apilot2@gmail.com>      
      
      Congratulations. Of course now you need to get those wheel pants and
      fairings on, mount interior panels and all that other almost finished
      stuff  that you showed us in OSH. Of course if you work it
      right...those tasks could put off that honey dew list for awhile. ;-)
      
      On Tue, Oct 27, 2009 at 1:52 PM, aerosport1
      <g.combs@aerosportmodeling.com> wrote:
      >
      > After 2 years and 20 days.
      >
      > On 10-26-09 at 4:30 PM N829GW took it's maiden flight with myself at the controls.
      I flew for 40 minutes and all went well. I now need to fly off 40 hours
      before I can start taking trips and passengers. And then My wife's honey dew list
      kicks into high gear.
      > That RVgrin just keeps giving and giving
      > What a great airplane
      >
      > Geoff
      >
      > --------
      > Geoff Combs
      > RV-10 QB N829GW
      > Finishing
      
      

Message 18


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 08:22:11 PM PST US
From: Don McDonald <building_partner@yahoo.com>
Subject: Re: N829GW Maiden flight      
      Great looking plane.... Congrats to the max.- Is the weather going to let
       you get those hours flown off?-- Another one joins the group.- This 
      is great watching this family grow.- Pretty soon we can hold our own flyi
      n.- 
      Don McDonald
      80+ hours and enjoying every minute
      
      --- On Tue, 10/27/09, aerosport1 <g.combs@aerosportmodeling.com> wrote:
      
      
      From: aerosport1 <g.combs@aerosportmodeling.com>
      Subject: RV10-List: N829GW Maiden flight
      
      
      m>
      
      After 2 years and 20 days.
      
      On 10-26-09- at 4:30 PM N829GW took it's maiden flight with myself at the
       controls. I flew for 40 minutes and all went well. I now need to fly off 4
      0 hours before I can start taking trips and passengers. And then My wife's 
      honey dew list kicks into high gear. 
      That RVgrin just keeps giving and giving
      What a great airplane
      
      Geoff
      
      --------
      Geoff Combs
      RV-10 QB N829GW
      Finishing
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=269702#269702
      
      
      Attachments: 
      
      http://forums.matronics.com//files/air1_107.jpg
      http://forums.matronics.com//files/landg_n829gw_671.jpg
      http://forums.matronics.com//files/panel2_806.jpg
      http://forums.matronics.com//files/rvgrin_528.jpg
      http://forums.matronics.com//files/right_n829gw_162.jpg
      
      
      le, List Admin.
      
      
      =0A=0A=0A      
      

Message 19


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 09:02:33 PM PST US
Subject: Re: N829GW Maiden flight
From: "AirMike" <Mikeabel@Pacbell.net>      
      
      Outstanding achievement and a great looking paint job - and panel
      
      Can I steal the paint design???? 
      
      Be very very careful with the test flying. Do not rush it. Pull the cowl every
      few hours - inspect - double check - be careful. I am now at 16 hrs and had some
      attention getters like - high airframe vibration - errors on CHT/EGT readings
      - and a fuel leak. They are all solvable, but caution is paramount. good luck
      
      --------
      OSH '10 or Bust 
      Q/B Kit - phase 1
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=269786#269786
      
      








Other Matronics Email List Services




Post A New Message    rv10-list@matronics.com
UN/SUBSCRIBE    http://www.matronics.com/subscription
List FAQ    http://www.matronics.com/FAQ/RV10-List.htm
Web Forum Interface To Lists    http://forums.matronics.com
Matronics List Wiki    http://wiki.matronics.com
7-Day List Browse    http://www.matronics.com/browse/rv10-list
Browse RV10-List Digests    http://www.matronics.com/digest/rv10-list
Browse Other Lists    http://www.matronics.com/browse
Live Online Chat!    http://www.matronics.com/chat
Archive Downloading    http://www.matronics.com/archives
Photo Share    http://www.matronics.com/photoshare
Other Email Lists    http://www.matronics.com/emaillists
Contributions    http://www.matronics.com/contribution









These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.




-- Please support this service by making your Contribution today! --