---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Tue 10/27/09: 19 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:52 AM - Re: Re: Firewall wiring/cable routing (David McNeill) 2. 06:38 AM - Re: Re: Firewall wiring/cable routing (Miller John) 3. 08:54 AM - Re: Door Pin - Idea (Miller John) 4. 10:11 AM - Re: Door Pin - Idea (Dave Saylor) 5. 01:56 PM - N829GW Maiden flight (aerosport1) 6. 02:01 PM - Re: N829GW Maiden flight (Condrey, Bob (US SSA)) 7. 02:35 PM - Re: N829GW Maiden flight (Jeff Carpenter) 8. 02:45 PM - Re: N829GW Maiden flight (Fred Williams, M.D.) 9. 02:54 PM - Re: N829GW Maiden flight (Geoff Combs) 10. 03:05 PM - Re: N829GW Maiden flight (Deems Davis) 11. 03:29 PM - Re: N829GW Maiden flight (Robin Marks) 12. 03:39 PM - Re: N829GW Maiden flight (Bill Mauledriver Watson) 13. 03:54 PM - Re: N829GW Maiden flight (ricksked@embarqmail.com) 14. 05:21 PM - Re: N829GW Maiden flight (Lenny Iszak) 15. 05:41 PM - Re: N829GW Maiden flight (Tim Olson) 16. 06:13 PM - Re: N829GW Maiden flight (Les Kearney) 17. 07:08 PM - Re: N829GW Maiden flight (Kelly McMullen) 18. 08:22 PM - Re: N829GW Maiden flight (Don McDonald) 19. 09:02 PM - Re: N829GW Maiden flight (AirMike) ________________________________ Message 1 _____________________________________ Time: 04:52:29 AM PST US From: "David McNeill" Subject: RE: RV10-List: Re: Firewall wiring/cable routing The glare shield holes (both sides) are for easy access to the backside of the panel. At my age standing on one's head for the time required to disconnected the EFIS connectors is unacceptable. I hold those panels in with cap screws so that the can be removed with an Allen wrench after the windscreen is installed as my panel is not removable (in sections) . _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of John Gonzalez Sent: Monday, October 26, 2009 9:07 PM Subject: RE: RV10-List: Re: Firewall wiring/cable routing I never understood that either as after the windscreen is on there is no room to actually get your hands, arms or head in there to work on the avionics. Perhaps a removable windscreen is in development. > Subject: RV10-List: Re: Firewall wiring/cable routing > From: johngoodman@earthlink.net > Date: Mon, 26 Oct 2009 19:27:58 -0700 > To: rv10-list@matronics.com > > > OK, I've gotta ask - is the hole in the glareshield for GPS? Or, the world's biggest defrost? > John > > -------- > #40572 QB Fuselage, wings finished. Finish Kit progressing. Engine & Panel delivery soon. > N711JG reserved > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=269596#269596 > > > > > > > ________________________________ Message 2 _____________________________________ Time: 06:38:07 AM PST US From: Miller John Subject: Re: RV10-List: Re: Firewall wiring/cable routing Dave, I'm going to keep those baggage compartment tie downs. Remind me how much they were and I'll send a check. Thanks - John On Oct 27, 2009, at 6:51 AM, David McNeill wrote: > The glare shield holes (both sides) are for easy access to the > backside of the panel. At my age standing on one's head for the time > required to disconnected the EFIS connectors is unacceptable. I hold > those panels in with cap screws so that the can be removed with an > Allen wrench after the windscreen is installed as my panel is not > removable (in sections) . > From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com > ] On Behalf Of John Gonzalez > Sent: Monday, October 26, 2009 9:07 PM > To: RV 10 group > Subject: RE: RV10-List: Re: Firewall wiring/cable routing > > I never understood that either as after the windscreen is on there > is no room to actually get your hands, arms or head in there to work > on the avionics. Perhaps a removable windscreen is in development. > > > Subject: RV10-List: Re: Firewall wiring/cable routing > > From: johngoodman@earthlink.net > > Date: Mon, 26 Oct 2009 19:27:58 -0700 > > To: rv10-list@matronics.com > > > > > > > > OK, I've gotta ask - is the hole in the glareshield for GPS? Or, > the world's biggest defrost? > > John > > > > -------- > > #40572 QB Fuselage, wings finished. Finish Kit progressing. Engine > & Panel delivery soon. > > N711JG reserved > > > > > > > > > > Read this topic online here: > > > > http://forums.matronics.com/viewtopic.php?p=269596#269596 > > > > > > > > > > > > > > > > > href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List > href="http://forums.matronics.com">http://forums.matronics.com > href="http://www.matronics.com/contribution">http:// > www.matronics.com/c > > ________________________________ Message 3 _____________________________________ Time: 08:54:46 AM PST US From: Miller John Subject: Re: RV10-List: Door Pin - Idea Dave, I'm going to keep the tie downs. Will get a check in the mail to you today. Thanks - grumpy On Oct 6, 2009, at 12:34 PM, Dave Saylor wrote: > Fifth item down: > > http://www.aircraftersllc.com/products.htm > > Dave Saylor > AirCrafters LLC > 140 Aviation Way > Watsonville, CA 95076 > 831-722-9141 Shop > 831-750-0284 Cell > > > On Tue, Oct 6, 2009 at 9:56 AM, Miller John wrote: > It would be nice to have a metal block the exact same size as the > nylon one for retrofit. > > The bullet and block would not retrofit to my door..... > > grumpy > N184JM > > Do not archive > > ________________________________ Message 4 _____________________________________ Time: 10:11:31 AM PST US Subject: Re: RV10-List: Door Pin - Idea From: Dave Saylor Thanks, John. Dave Saylor AirCrafters LLC 140 Aviation Way Watsonville, CA 95076 831-722-9141 Shop 831-750-0284 Cell On Tue, Oct 27, 2009 at 8:48 AM, Miller John wrote: > Dave, > > I'm going to keep the tie downs. > > Will get a check in the mail to you today. > > Thanks - grumpy > > On Oct 6, 2009, at 12:34 PM, Dave Saylor wrote: > > Fifth item down: > > http://www.aircraftersllc.com/products.htm > > Dave Saylor > AirCrafters LLC > 140 Aviation Way > Watsonville, CA 95076 > 831-722-9141 Shop > 831-750-0284 Cell > > > On Tue, Oct 6, 2009 at 9:56 AM, Miller John wrote: > >> It would be nice to have a metal block the exact same size as the nylon >> one for retrofit. >> >> The bullet and block would not retrofit to my door..... >> >> grumpy >> N184JM >> >> Do not archive > > * > > =================================== > tp://www.matronics.com/Navigator?RV10-List > ====================================nics.com > ====================================w.matronics.com/contribution > =================================== > * > > > > > * > > * > > ________________________________ Message 5 _____________________________________ Time: 01:56:03 PM PST US Subject: RV10-List: N829GW Maiden flight From: "aerosport1" After 2 years and 20 days. On 10-26-09 at 4:30 PM N829GW took it's maiden flight with myself at the controls. I flew for 40 minutes and all went well. I now need to fly off 40 hours before I can start taking trips and passengers. And then My wife's honey dew list kicks into high gear. That RVgrin just keeps giving and giving What a great airplane Geoff -------- Geoff Combs RV-10 QB N829GW Finishing Read this topic online here: http://forums.matronics.com/viewtopic.php?p=269702#269702 Attachments: http://forums.matronics.com//files/air1_107.jpg http://forums.matronics.com//files/landg_n829gw_671.jpg http://forums.matronics.com//files/panel2_806.jpg http://forums.matronics.com//files/rvgrin_528.jpg http://forums.matronics.com//files/right_n829gw_162.jpg ________________________________ Message 6 _____________________________________ Time: 02:01:21 PM PST US From: "Condrey, Bob (US SSA)" Subject: RE: RV10-List: N829GW Maiden flight Congratulations! Bob -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of aerosport1 Sent: Tuesday, October 27, 2009 3:53 PM Subject: RV10-List: N829GW Maiden flight After 2 years and 20 days. On 10-26-09 at 4:30 PM N829GW took it's maiden flight with myself at the controls. I flew for 40 minutes and all went well. I now need to fly off 40 hours before I can start taking trips and passengers. And then My wife's honey dew list kicks into high gear. That RVgrin just keeps giving and giving What a great airplane Geoff -------- Geoff Combs RV-10 QB N829GW Finishing Read this topic online here: http://forums.matronics.com/viewtopic.php?p=269702#269702 Attachments: http://forums.matronics.com//files/air1_107.jpg http://forums.matronics.com//files/landg_n829gw_671.jpg http://forums.matronics.com//files/panel2_806.jpg http://forums.matronics.com//files/rvgrin_528.jpg http://forums.matronics.com//files/right_n829gw_162.jpg ________________________________ Message 7 _____________________________________ Time: 02:35:18 PM PST US From: Jeff Carpenter Subject: Re: RV10-List: N829GW Maiden flight Wow!... that is one gorgeous airplane. On Oct 27, 2009, at 1:52 PM, aerosport1 wrote: > > > > After 2 years and 20 days. > > On 10-26-09 at 4:30 PM N829GW took it's maiden flight with myself > at the controls. I flew for 40 minutes and all went well. I now need > to fly off 40 hours before I can start taking trips and passengers. > And then My wife's honey dew list kicks into high gear. > That RVgrin just keeps giving and giving > What a great airplane > > Geoff > > -------- > Geoff Combs > RV-10 QB N829GW > Finishing > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=269702#269702 > > > Attachments: > > http://forums.matronics.com//files/air1_107.jpg > http://forums.matronics.com//files/landg_n829gw_671.jpg > http://forums.matronics.com//files/panel2_806.jpg > http://forums.matronics.com//files/rvgrin_528.jpg > http://forums.matronics.com//files/right_n829gw_162.jpg > > ________________________________ Message 8 _____________________________________ Time: 02:45:16 PM PST US From: "Fred Williams, M.D." Subject: Re: RV10-List: N829GW Maiden flight Geoff: Sweet looking airplane. What's the back round city? Congrats. Dr Fred. N515 FW 180 hrs > > > ________________________________ Message 9 _____________________________________ Time: 02:54:33 PM PST US From: "Geoff Combs" Subject: RE: RV10-List: N829GW Maiden flight That is Columbus Ohio Geoff Combs President Aerosport Modeling & Design 8090 Howe Industrial Parkway Canal Winchester, Ohio 43110 614-834-5227p 614-834-5230f www.aerosportmodeling.com -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Fred Williams, M.D. Sent: Tuesday, October 27, 2009 5:34 PM Subject: Re: RV10-List: N829GW Maiden flight --> Geoff: Sweet looking airplane. What's the back round city? Congrats. Dr Fred. N515 FW 180 hrs > > > ________________________________ Message 10 ____________________________________ Time: 03:05:32 PM PST US From: Deems Davis Subject: Re: RV10-List: N829GW Maiden flight I've been waiting for the News , Great Job Geoff! Deems Davis N519PJ www.deemsrv10.com aerosport1 wrote: > > After 2 years and 20 days. > > On 10-26-09 at 4:30 PM N829GW took it's maiden flight with myself at the controls. I flew for 40 minutes and all went well. I now need to fly off 40 hours before I can start taking trips and passengers. And then My wife's honey dew list kicks into high gear. > That RVgrin just keeps giving and giving > What a great airplane > > Geoff > > -------- > Geoff Combs > RV-10 QB N829GW > Finishing > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=269702#269702 > > > Attachments: > > http://forums.matronics.com//files/air1_107.jpg > http://forums.matronics.com//files/landg_n829gw_671.jpg > http://forums.matronics.com//files/panel2_806.jpg > http://forums.matronics.com//files/rvgrin_528.jpg > http://forums.matronics.com//files/right_n829gw_162.jpg > > > ________________________________ Message 11 ____________________________________ Time: 03:29:15 PM PST US Subject: RE: RV10-List: N829GW Maiden flight From: "Robin Marks" Fantastic news and a beautiful aircraft! Enjoy your Phase 1. Robin Do Not Archive ________________________________ Message 12 ____________________________________ Time: 03:39:21 PM PST US From: Bill Mauledriver Watson Subject: Re: RV10-List: N829GW Maiden flight Looks Fantastic! Congratulations. Bill Watson aerosport1 wrote: > > After 2 years and 20 days. > > On 10-26-09 at 4:30 PM N829GW took it's maiden flight with myself at the controls. I flew for 40 minutes and all went well. I now need to fly off 40 hours before I can start taking trips and passengers. And then My wife's honey dew list kicks into high gear. > That RVgrin just keeps giving and giving > What a great airplane > > Geoff > > -------- > Geoff Combs > RV-10 QB N829GW > Finishing > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=269702#269702 > > > Attachments: > > http://forums.matronics.com//files/air1_107.jpg > http://forums.matronics.com//files/landg_n829gw_671.jpg > http://forums.matronics.com//files/panel2_806.jpg > http://forums.matronics.com//files/rvgrin_528.jpg > http://forums.matronics.com//files/right_n829gw_162.jpg > > > ________________________________ Message 13 ____________________________________ Time: 03:54:09 PM PST US Subject: Re: RV10-List: N829GW Maiden flight From: ricksked@embarqmail.com Geoff, Great job....how much rudder trim did you use if any...I copied your system Rick S. N246RS 65 hours and climbing ------Original Message------ From: Geoff Combs Sender: owner-rv10-list-server@matronics.com ReplyTo: Rv Sent: Oct 27, 2009 2:51 PM Subject: RE: RV10-List: N829GW Maiden flight That is Columbus Ohio Geoff Combs President Aerosport Modeling & Design 8090 Howe Industrial Parkway Canal Winchester, Ohio 43110 614-834-5227p 614-834-5230f www.aerosportmodeling.com -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Fred Williams, M.D. Sent: Tuesday, October 27, 2009 5:34 PM Subject: Re: RV10-List: N829GW Maiden flight --> Geoff: Sweet looking airplane. What's the back round city? Congrats. Dr Fred. N515 FW 180 hrs > > > Sent via BlackBerry by AT&T ________________________________ Message 14 ____________________________________ Time: 05:21:23 PM PST US Subject: RV10-List: Re: N829GW Maiden flight From: "Lenny Iszak" Congrats Geoff! The paint job is awesome! Enjoy your flyoff! Lenny Read this topic online here: http://forums.matronics.com/viewtopic.php?p=269751#269751 ________________________________ Message 15 ____________________________________ Time: 05:41:58 PM PST US From: Tim Olson Subject: Re: RV10-List: N829GW Maiden flight Beautiful! What a great day! Tim Olson - RV-10 N104CD do not archive aerosport1 wrote: > > After 2 years and 20 days. > > On 10-26-09 at 4:30 PM N829GW took it's maiden flight with myself at the controls. I flew for 40 minutes and all went well. I now need to fly off 40 hours before I can start taking trips and passengers. And then My wife's honey dew list kicks into high gear. > That RVgrin just keeps giving and giving > What a great airplane > > Geoff > > -------- > Geoff Combs > RV-10 QB N829GW > Finishing > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=269702#269702 > > > > > Attachments: > > http://forums.matronics.com//files/air1_107.jpg > http://forums.matronics.com//files/landg_n829gw_671.jpg > http://forums.matronics.com//files/panel2_806.jpg > http://forums.matronics.com//files/rvgrin_528.jpg > http://forums.matronics.com//files/right_n829gw_162.jpg > > > > > > > ________________________________ Message 16 ____________________________________ Time: 06:13:02 PM PST US From: "Les Kearney" Subject: RE: RV10-List: N829GW Maiden flight Geoff That is a very nice bit of kit. Congrats Les -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of aerosport1 Sent: October-27-09 2:53 PM Subject: RV10-List: N829GW Maiden flight After 2 years and 20 days. On 10-26-09 at 4:30 PM N829GW took it's maiden flight with myself at the controls. I flew for 40 minutes and all went well. I now need to fly off 40 hours before I can start taking trips and passengers. And then My wife's honey dew list kicks into high gear. That RVgrin just keeps giving and giving What a great airplane Geoff -------- Geoff Combs RV-10 QB N829GW Finishing Read this topic online here: http://forums.matronics.com/viewtopic.php?p=269702#269702 Attachments: http://forums.matronics.com//files/air1_107.jpg http://forums.matronics.com//files/landg_n829gw_671.jpg http://forums.matronics.com//files/panel2_806.jpg http://forums.matronics.com//files/rvgrin_528.jpg http://forums.matronics.com//files/right_n829gw_162.jpg ________________________________ Message 17 ____________________________________ Time: 07:08:04 PM PST US Subject: Re: RV10-List: N829GW Maiden flight From: Kelly McMullen Congratulations. Of course now you need to get those wheel pants and fairings on, mount interior panels and all that other almost finished stuff that you showed us in OSH. Of course if you work it right...those tasks could put off that honey dew list for awhile. ;-) On Tue, Oct 27, 2009 at 1:52 PM, aerosport1 wrote: > > After 2 years and 20 days. > > On 10-26-09 at 4:30 PM N829GW took it's maiden flight with myself at the controls. I flew for 40 minutes and all went well. I now need to fly off 40 hours before I can start taking trips and passengers. And then My wife's honey dew list kicks into high gear. > That RVgrin just keeps giving and giving > What a great airplane > > Geoff > > -------- > Geoff Combs > RV-10 QB N829GW > Finishing ________________________________ Message 18 ____________________________________ Time: 08:22:11 PM PST US From: Don McDonald Subject: Re: RV10-List: N829GW Maiden flight Great looking plane.... Congrats to the max.- Is the weather going to let you get those hours flown off?-- Another one joins the group.- This is great watching this family grow.- Pretty soon we can hold our own flyi n.- Don McDonald 80+ hours and enjoying every minute --- On Tue, 10/27/09, aerosport1 wrote: From: aerosport1 Subject: RV10-List: N829GW Maiden flight m> After 2 years and 20 days. On 10-26-09- at 4:30 PM N829GW took it's maiden flight with myself at the controls. I flew for 40 minutes and all went well. I now need to fly off 4 0 hours before I can start taking trips and passengers. And then My wife's honey dew list kicks into high gear. That RVgrin just keeps giving and giving What a great airplane Geoff -------- Geoff Combs RV-10 QB N829GW Finishing Read this topic online here: http://forums.matronics.com/viewtopic.php?p=269702#269702 Attachments: http://forums.matronics.com//files/air1_107.jpg http://forums.matronics.com//files/landg_n829gw_671.jpg http://forums.matronics.com//files/panel2_806.jpg http://forums.matronics.com//files/rvgrin_528.jpg http://forums.matronics.com//files/right_n829gw_162.jpg le, List Admin. =0A=0A=0A ________________________________ Message 19 ____________________________________ Time: 09:02:33 PM PST US Subject: RV10-List: Re: N829GW Maiden flight From: "AirMike" Outstanding achievement and a great looking paint job - and panel Can I steal the paint design???? Be very very careful with the test flying. Do not rush it. Pull the cowl every few hours - inspect - double check - be careful. I am now at 16 hrs and had some attention getters like - high airframe vibration - errors on CHT/EGT readings - and a fuel leak. They are all solvable, but caution is paramount. good luck -------- OSH '10 or Bust Q/B Kit - phase 1 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=269786#269786 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.