---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Wed 10/28/09: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:11 AM - Re: Door Pin - Idea (Robert Brunkenhoefer) 2. 08:48 AM - Sealing Firewall Penetrations (Les Kearney) 3. 09:07 AM - Re: Sealing Firewall Penetrations (Perry, Phil) 4. 10:01 AM - Re: N829GW Maiden flight (Richard Barnes) 5. 10:30 AM - Re: N829GW Maiden flight (orchidman) 6. 12:36 PM - Re: Copperstate RV10 nest (woxofswa) ________________________________ Message 1 _____________________________________ Time: 05:11:21 AM PST US From: Robert Brunkenhoefer Subject: Re: RV10-List: Door Pin - Idea my mechanic had a difficult time making the blocks fit also. we only did one door for now because of it. hole size too small, block too wide in places . robert On Oct 27, 2009, at 10:48 AM, Miller John wrote: > Dave, > > I'm going to keep the tie downs. > > Will get a check in the mail to you today. > > Thanks - grumpy > > On Oct 6, 2009, at 12:34 PM, Dave Saylor wrote: > >> Fifth item down: >> >> http://www.aircraftersllc.com/products.htm >> >> Dave Saylor >> AirCrafters LLC >> 140 Aviation Way >> Watsonville, CA 95076 >> 831-722-9141 Shop >> 831-750-0284 Cell >> >> >> On Tue, Oct 6, 2009 at 9:56 AM, Miller John >> wrote: >> It would be nice to have a metal block the exact same size as the >> nylon one for retrofit. >> >> The bullet and block would not retrofit to my door..... >> >> grumpy >> N184JM >> >> Do not archive >> >> >> >> =================================== >> tp://www.matronics.com/Navigator?RV10-List >> =================================== >> nics.com >> =================================== >> w.matronics.com/contribution >> =================================== >> > > > > ________________________________ Message 2 _____________________________________ Time: 08:48:52 AM PST US From: "Les Kearney" Subject: RV10-List: Sealing Firewall Penetrations Hi I am just about ready to rivet in the center recess of the firewall. I am wonder what the best product would be to seal this in as well as perhaps some of the other firewall penetrations. I am planning to use stainless eyeball penetrations from ACS as well as a SAFEAIR1 firesleeve penetration for wiring. From what I have read fuel tank sealant is good to 400c while wind blown avgas burns at 2,000c. What is the current list thinking on this subject? Cheers Les #40643 - Living in f/g hell ________________________________ Message 3 _____________________________________ Time: 09:07:13 AM PST US Subject: RE: RV10-List: Sealing Firewall Penetrations From: "Perry, Phil" Here is one for you. http://www.flamemaster.com/TechnicalsPDF/cs1900.pdf From: Les Kearney [mailto:kearney@shaw.ca] Sent: Wednesday, October 28, 2009 10:47 AM Subject: RV10-List: Sealing Firewall Penetrations Hi I am just about ready to rivet in the center recess of the firewall. I am wonder what the best product would be to seal this in as well as perhaps some of the other firewall penetrations. I am planning to use stainless eyeball penetrations from ACS as well as a SAFEAIR1 firesleeve penetration for wiring. From what I have read fuel tank sealant is good to 400c while wind blown avgas burns at 2,000c. What is the current list thinking on this subject? Cheers Les #40643 - Living in f/g hell ________________________________ Message 4 _____________________________________ Time: 10:01:36 AM PST US From: "Richard Barnes" Subject: RE: RV10-List: N829GW Maiden flight Congratulations. A beautiful plane and a great looking panel. It looks like you got one of the 4500's. We're still waiting for ours. How does the 4500 work? Rick -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of aerosport1 Sent: Tuesday, October 27, 2009 2:53 PM Subject: RV10-List: N829GW Maiden flight After 2 years and 20 days. On 10-26-09 at 4:30 PM N829GW took it's maiden flight with myself at the controls. I flew for 40 minutes and all went well. I now need to fly off 40 hours before I can start taking trips and passengers. And then My wife's honey dew list kicks into high gear. That RVgrin just keeps giving and giving What a great airplane Geoff -------- Geoff Combs RV-10 QB N829GW Finishing Read this topic online here: http://forums.matronics.com/viewtopic.php?p=269702#269702 Attachments: http://forums.matronics.com//files/air1_107.jpg http://forums.matronics.com//files/landg_n829gw_671.jpg http://forums.matronics.com//files/panel2_806.jpg http://forums.matronics.com//files/rvgrin_528.jpg http://forums.matronics.com//files/right_n829gw_162.jpg ________________________________ Message 5 _____________________________________ Time: 10:30:28 AM PST US Subject: RV10-List: Re: N829GW Maiden flight From: "orchidman" velo wrote: > Congratulations. A beautiful plane and a great looking panel. It looks > like you got one of the 4500's. We're still waiting for ours. How does the > 4500 work? > Rick > -- Rick, ONE [Shocked] Looks like he kyped 2 of the 4500's [Mr. Green] -------- Gary Blankenbiller RV10 - # 40674 (N2GB Flying) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=269866#269866 ________________________________ Message 6 _____________________________________ Time: 12:36:31 PM PST US Subject: RV10-List: Re: Copperstate RV10 nest From: "woxofswa" There was a tanned silvered haired fellow that came for lunch. I didn't catch his name and I believe he came as a guest of another builder. He came back when we were packing up and got a couple of drinks out of the cooler inside the trailer. I am pretty sure that he is the fellow who left the camera. If he sounds familiar to anyone please help me get this camera back to him. Myron 602 421 2868 -------- Myron Nelson Mesa, AZ Emp completed, legacy build fuse in progress Read this topic online here: http://forums.matronics.com/viewtopic.php?p=269881#269881 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.