---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sat 03/20/10: 13 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:42 AM - Re: Finish Kit Question (stuewe) 2. 08:05 AM - USB Outlet (Les Kearney) 3. 08:33 AM - Re: USB Outlet (Rene Felker) 4. 10:11 AM - Re: USB Outlet (Les Kearney) 5. 11:34 AM - Re: USB Outlet (Lenny Iszak) 6. 01:43 PM - Re: front spar bracket - HS (Russell Shavitz) 7. 01:43 PM - Re: Re: USB Outlet (RV Builder (Michael Sausen)) 8. 05:42 PM - AHRS and Magnetometer location on the 10 (Strasnuts) 9. 05:48 PM - Re: Finish Kit Question (Bob Turner) 10. 05:53 PM - Re: Re: Finish Kit Question (Kelly McMullen) 11. 06:33 PM - Re: RV-10 Kit for sale (doctornigel) 12. 08:04 PM - Re: Re: Finish Kit Question (Jeff Carpenter) 13. 11:40 PM - New Latch Final Assembly (Scott Schmidt) ________________________________ Message 1 _____________________________________ Time: 07:42:35 AM PST US Subject: RV10-List: Re: Finish Kit Question From: "stuewe" Tim Olson wrote: > Man, you really got me upset. > I'm going to close down that part of the site now. > > > Tim, Obviously you are upset. Although I am not sure why. I do not want to upset you any further, but I do want to ask you to please reconsider shutting down the builder's section of your site. It was and could continue to be a great resource for those of us still following in your footsteps. There is some TERRIFIC info there. Please reconsider. Stuewe stuewe@gmail.com Read this topic online here: http://forums.matronics.com/viewtopic.php?p=291038#291038 ________________________________ Message 2 _____________________________________ Time: 08:05:28 AM PST US From: "Les Kearney" Subject: RV10-List: USB Outlet Hi I am thinking about lumbing in a couple of USB ports. Does anyone have a source / part number for a USB port? Cheers Les ________________________________ Message 3 _____________________________________ Time: 08:33:49 AM PST US From: "Rene Felker" Subject: RE: RV10-List: USB Outlet Steinair.. Here is the page. http://www.steinair.com/accessories.htm Rene 801-721-6080 From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Les Kearney Sent: Saturday, March 20, 2010 9:04 AM Subject: RV10-List: USB Outlet Hi I am thinking about lumbing in a couple of USB ports. Does anyone have a source / part number for a USB port? Cheers Les ________________________________ Message 4 _____________________________________ Time: 10:11:50 AM PST US From: "Les Kearney" Subject: RE: RV10-List: USB Outlet Hi Rene Stien sells a cable for providing EFIS access. What I would like to do is mount a couple of USB ports that provide power only to USB powered devices such as an IPhone. There would be no connectivity, just power. Cheers Les _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Rene Felker Sent: March-20-10 9:31 AM Subject: RE: RV10-List: USB Outlet Steinair.. Here is the page. http://www.steinair.com/accessories.htm Rene 801-721-6080 From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Les Kearney Sent: Saturday, March 20, 2010 9:04 AM Subject: RV10-List: USB Outlet Hi I am thinking about lumbing in a couple of USB ports. Does anyone have a source / part number for a USB port? Cheers Les http://www.matronics.com/Navigator?RV10-List http://forums.matronics.com http://www.matronics.com/contribution ________________________________ Message 5 _____________________________________ Time: 11:34:32 AM PST US Subject: RV10-List: Re: USB Outlet From: "Lenny Iszak" Les, You could just get a couple of these from ebay: http://cgi.ebay.com/Mini-Car-Cigarette-Lighter-to-USB-Charger-Adapter-f-MP3_W0QQitemZ150424165829QQcmdZViewItemQQptZPDA_Accessories?hash=item2305fa9dc5 Remove the electronics and connect it to Stein's cable. Or use the whole thing as it is in a cigarette lighter socket. I got one of those cables that Stein sells but with dual USB ports. Don't rember where i got it from, but if you need it, let me know and I'll look into it. Lenny Read this topic online here: http://forums.matronics.com/viewtopic.php?p=291070#291070 ________________________________ Message 6 _____________________________________ Time: 01:43:54 PM PST US From: Russell Shavitz Subject: Re: RV10-List: front spar bracket - HS Jake I did these on my horizontal mill if you are still having trouble I can make you a set, it took me about 10 min. Russ Shavitz -----Original Message----- >From: Rick >Sent: Mar 18, 2010 11:13 PM >To: "rv10-list@matronics.com" >Subject: Re: RV10-List: front spar bracket - HS > > >Just to keep you going in the right direction ....2/32nds is >1/16th. ;) > >Rick > >On Mar 18, 2010, at 7:45 PM, "JHearnsberger" > wrote: > >> > >> >> These brackets have been driving me crazy. I got the first bracket >> perfect, the left bracket. I screwed up the second, the right >> bracket. So, I tossed it. There was just enough angle left to try >> cutting the right bracket again. My cut is ok.... but, the two >> holes are about 1/32 or 2/32 lower than the two holes on the left >> bracket. >> >> Do I need to keep re-doing these brackets over and over until I get >> them perfect or are they ok? >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=290790#290790 >> >> >> >> >> Attachments: >> >> http://forums.matronics.com//files/photo_177.jpg >> >> >> >> >> >> >> > > Russell Shavitz Shavitz Heating & Air Conditioning 4849 Main Street, Skokie, IL 60077 office: 847-678-1000 cell: 847-417-6622 www.shavitz.com ________________________________ Message 7 _____________________________________ Time: 01:43:55 PM PST US From: "RV Builder (Michael Sausen)" Subject: RE: RV10-List: Re: USB Outlet You can get lighter to USB adapters like that almost anywhere nowadays. Wire for 12v lighter sockets and you will be future proof. michael -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Lenny Iszak Sent: Saturday, March 20, 2010 1:33 PM Subject: RV10-List: Re: USB Outlet Les, You could just get a couple of these from ebay: http://cgi.ebay.com/Mini-Car-Cigarette-Lighter-to-USB-Charger-Adapter-f-MP3_W0QQitemZ150424165829QQcmdZViewItemQQptZPDA_Accessories?hash=item2305fa9dc5 Remove the electronics and connect it to Stein's cable. Or use the whole thing as it is in a cigarette lighter socket. I got one of those cables that Stein sells but with dual USB ports. Don't rember where i got it from, but if you need it, let me know and I'll look into it. Lenny Read this topic online here: http://forums.matronics.com/viewtopic.php?p=291070#291070 ________________________________ Message 8 _____________________________________ Time: 05:42:39 PM PST US Subject: RV10-List: AHRS and Magnetometer location on the 10 From: "Strasnuts" I don't get it. I read the G3x installation manual and noticed the bracket they use to mount the magnetometer goes on the aft deck in front of the horizontal. Later it suggest to keep it at least 10 feet from any motor or servo. The elevator trim servo is right under the aft deck so I don't get it. Would it be better in the wing opposite the one with the aileron servo? It is a GMU 44. I plan on mounting the AHRS over the battery up high but again the manual suggests to mount it no more than 6.5 feet from the cg. -------- Cust. #40936 RV-10 SB Fuselage N801VR reserved Read this topic online here: http://forums.matronics.com/viewtopic.php?p=291101#291101 ________________________________ Message 9 _____________________________________ Time: 05:48:02 PM PST US Subject: RV10-List: Re: Finish Kit Question From: "Bob Turner" Stuewe: I trust Tim was writing tongue in cheek. Pascal: I bought my FFW kit at the end of last summer (2009). The exhaust instructions say, "...these instructions are for the old exhaust, not the one you received. But they go together similarly.." (!) -------- Bob Turner RV-10 QB Read this topic online here: http://forums.matronics.com/viewtopic.php?p=291103#291103 ________________________________ Message 10 ____________________________________ Time: 05:53:58 PM PST US Subject: Re: RV10-List: Re: Finish Kit Question From: Kelly McMullen I could be wrong, but I believe Tim wanted to limit access to the plans pages to those that have registered with him with builder numbers. So direct linking is not appropriate, if I understand correctly...copy right issues, etc. Do not archive On Sat, Mar 20, 2010 at 6:47 PM, Bob Turner wrote: > > Stuewe: I trust Tim was writing tongue in cheek. > > Pascal: I bought my FFW kit at the end of last summer (2009). The exhaust instructions say, "...these instructions are for the old exhaust, not the one you received. But they go together similarly.." (!) > > -------- > Bob Turner > RV-10 QB ________________________________ Message 11 ____________________________________ Time: 06:33:31 PM PST US Subject: RV10-List: Re: RV-10 Kit for sale From: "doctornigel" For anyone that wants to contact me off list about the RV-10 for sale, my email is nschultz3@cfl.rr.com , thanks Read this topic online here: http://forums.matronics.com/viewtopic.php?p=291107#291107 ________________________________ Message 12 ____________________________________ Time: 08:04:18 PM PST US From: Jeff Carpenter Subject: Re: RV10-List: Re: Finish Kit Question It was not tongue in cheek... it's down. On Mar 20, 2010, at 5:47 PM, Bob Turner wrote: > > Stuewe: I trust Tim was writing tongue in cheek. > > Pascal: I bought my FFW kit at the end of last summer (2009). The > exhaust instructions say, "...these instructions are for the old > exhaust, not the one you received. But they go together > similarly.." (!) > > -------- > Bob Turner > RV-10 QB > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=291103#291103 > > ________________________________ Message 13 ____________________________________ Time: 11:40:45 PM PST US From: Scott Schmidt Subject: RV10-List: New Latch Final Assembly I finished one door today with the new latch and just want to say how cool I think this system is. Hopefully the video shows how nice this works. There are a couple more pictures and information here. http://www.vansairforce.com/community/showthread.php?p=416233#post416233 Here is a separate link to the video. http://www.youtube.com/watch?v=g8oIYi55JL4 Scott Schmidt scottmschmidt@yahoo.com ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.