RV10-List Digest Archive

Thu 03/25/10


Total Messages Posted: 6



Today's Message Index:
----------------------
 
     1. 08:28 AM - Re: Rear headset jack locations (dmaib@me.com)
     2. 02:24 PM - Firewall Thickness (Jesse Saint)
     3. 02:35 PM - Firewall Thickness (Jesse Saint)
     4. 03:07 PM - Re: Firewall Thickness (Perry, Phil)
     5. 03:38 PM - Re: Firewall Thickness (John Hilger)
     6. 05:22 PM - TCW product availablity (Bob-tcw)
 
 
 


Message 1



  • 					INDEX
    		•  Back to Main INDEX
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 08:28:16 AM PST US
    Subject: Re: Rear headset jack locations
    From: "dmaib@me.com" <dmaib@me.com>
          
      
      I am totally in agreement with Myron on this issue. I used my Uflymike for my last
      three or four years as a gainfully employed pilot and have continued to use
      them in my RV-10 as a retired airport bum. Be disciplined about putting in a
      new battery on some kind of schedule and be aware of the warnings you get when
      the battery is getting low, and it is great. Best headset combo I have ever
      used in 40+ years of flying.
      
      --------
      David Maib
      RV-10 #40559
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=291675#291675
      
      


    Message 2

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 02:24:00 PM PST US
    From: Jesse Saint <jesse@saintaviation.com>
    Subject: Firewall Thickness
          
      Does anybody have a caliper and access to their uninstalled firewall (or 
      good access to an edge in there somewhere) that could give me the 
      thickness of the SS sheet used for the FW?
      
      Thanks.
      
      Jesse Saint
      Saint Aviation, Inc.
      jesse@saintaviation.com
      Cell: 352-427-0285
      Fax: 815-377-3694
      
      


    Message 3

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 02:35:00 PM PST US
    From: Jesse Saint <jesse@saintaviation.com>
    Subject: Firewall Thickness
          
      Does anybody have a caliper and access to their uninstalled firewall (or 
      good access to an edge in there somewhere) that could give me the 
      thickness of the SS sheet used for the FW?
      
      Thanks.
      
      Jesse Saint
      Saint Aviation, Inc.
      jesse@saintaviation.com
      Cell: 352-427-0285
      Fax: 815-377-3694
      
      


    Message 4

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 03:07:51 PM PST US
    Subject: Re: Firewall Thickness
    From: "Perry, Phil" <Phil.Perry@netapp.com>
          
      LjAyNSBvbiBtaW5lLiANCg0KUGhpbA0KDQpfX19fX19fX19fX19fX19fX19fX19fX19fX19fX19f
      Xw0KDQpGcm9tOiBKZXNzZSBTYWludCA8amVzc2VAc2FpbnRhdmlhdGlvbi5jb20+IA0KVG86IHJ2
      MTAtbGlzdEBtYXRyb25pY3MuY29tIDxydjEwLWxpc3RAbWF0cm9uaWNzLmNvbT4gDQpTZW50OiBU
      aHUgTWFyIDI1IDEzOjE0OjI4IDIwMTANClN1YmplY3Q6IFJWMTAtTGlzdDogRmlyZXdhbGwgVGhp
      Y2tuZXNzIA0KDQoNCkRvZXMgYW55Ym9keSBoYXZlIGEgY2FsaXBlciBhbmQgYWNjZXNzIHRvIHRo
      ZWlyIHVuaW5zdGFsbGVkIGZpcmV3YWxsIChvciBnb29kIGFjY2VzcyB0byBhbiBlZGdlIGluIHRo
      ZXJlIHNvbWV3aGVyZSkgdGhhdCBjb3VsZCBnaXZlIG1lIHRoZSB0aGlja25lc3Mgb2YgdGhlIFNT
      IHNoZWV0IHVzZWQgZm9yIHRoZSBGVz8NCg0KVGhhbmtzLg0KDQpKZXNzZSBTYWludA0KU2FpbnQg
      QXZpYXRpb24sIEluYy4NCmplc3NlQHNhaW50YXZpYXRpb24uY29tDQpDZWxsOiAzNTItNDI3LTAy
      ODUNCkZheDogODE1LTM3Ny0zNjk0DQoNCg0KDQpfLT0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0z
      RD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0z
      RD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0z
      RD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRD0zRA0KXy09M0QgICAgICAgICAg
      LSBUaGUgUlYxMC1MaXN0IEVtYWlsIEZvcnVtIC0NCl8tPTNEIFVzZSB0aGUgTWF0cm9uaWNzIExp
      c3QgRmVhdHVyZXMgTmF2aWdhdG9yIHRvIGJyb3dzZQ0KXy09M0QgdGhlIG1hbnkgTGlzdCB1dGls
      aXRpZXMgc3VjaCBhcyBMaXN0IFVuL1N1YnNjcmlwdGlvbiwNCl8tPTNEIEFyY2hpdmUgU2VhcmNo
      ICYgRG93bmxvYWQsIDctRGF5IEJyb3dzZSwgQ2hhdCwgRkFRLA0KXy09M0QgUGhvdG9zaGFyZSwg
      YW5kIG11Y2ggbXVjaCBtb3JlOg0KXy09M0QNCl8tPTNEICAgLS0+IGh0dHA6Ly93d3cubWF0cm9u
      aWNzLmNvbS9OYXZpZ2F0b3I/UlYxMC1MaXN0DQpfLT0zRA0KXy09M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9
      M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9
      M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9
      M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0QNCl8tPTNEICAg
      ICAgICAgICAgICAgLSBNQVRST05JQ1MgV0VCIEZPUlVNUyAtDQpfLT0zRCBTYW1lIGdyZWF0IGNv
      bnRlbnQgYWxzbyBhdmFpbGFibGUgdmlhIHRoZSBXZWIgRm9ydW1zIQ0KXy09M0QNCl8tPTNEICAg
      LS0+IGh0dHA6Ly9mb3J1bXMubWF0cm9uaWNzLmNvbQ0KXy09M0QNCl8tPTNEPTNEPTNEPTNEPTNE
      PTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNE
      PTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNE
      PTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEPTNEDQpfLT0z
      RCAgICAgICAgICAgICAtIExpc3QgQ29udHJpYnV0aW9uIFdlYiBTaXRlIC0NCl8tPTNEICBUaGFu
      ayB5b3UgZm9yIHlvdXIgZ2VuZXJvdXMgc3VwcG9ydCENCl8tPTNEICAgICAgICAgICAgICAgICAg
      ICAgICAgICAgICAgLU1hdHQgRHJhbGxlLCBMaXN0IEFkbWluLg0KXy09M0QgICAtLT4gaHR0cDov
      L3d3dy5tYXRyb25pY3MuY29tL2NvbnRyaWJ1dGlvbg0KXy09M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9
      M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9
      M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9
      M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0Q9M0QNCg0KDQo
      


    Message 5

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 03:38:57 PM PST US
    From: John Hilger <ninepapa@bendbroadband.com>
    Subject: Re: Firewall Thickness
          
      Jesse
      
      0.018" thick or just over 1/64".
      I am not sure about the alloy, but my guess would be 303 or 304.
      Hope this helps.
      
      John
      
      
      On Mar 25, 2010, at 1:14 PM, Jesse Saint wrote:
      
      > Does anybody have a caliper and access to their uninstalled firewall 
      (or good access to an edge in there somewhere) that could give me the 
      thickness of the SS sheet used for the FW?
      > 
      > Thanks.
      > 
      > Jesse Saint
      > Saint Aviation, Inc.
      > jesse@saintaviation.com
      > Cell: 352-427-0285
      > Fax: 815-377-3694
      > 
      > 
      > 
      > 
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D
      > 
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D
      > 
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D
      > 
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D
      > 
      
      


    Message 6

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 05:22:39 PM PST US
    From: "Bob-tcw" <rnewman@tcwtech.com>
    Subject: TCW product availablity
          
      Fellow builders,
      
            Our new product,   Integrated Back-up Battery System  (IBBS) is 
      now available and in stock.   This new product provides back-up power 
      for critical electronics in one simple and easy to install package.   
      IBBS combines a Ni-mh battery pack, charging and switching circuitry in 
      one convenient package for easy installation that weighs 1/2 of lead 
      acid battery solutions.   IBBS has been designed to provide back-up 
      power to EFIS, Engine monitors, GPS and Auto-pilot systems.    For those 
      going to Sun-n-Fun we will have a working demo of IBBS as well as all of 
      the other TCW products for you to see first hand.   
      
      All the details are available at:   www.tcwtech.com
      
      
      Thanks,
      Bob Newman
      RV-10  40176
      
      TCW Technologies, LLC.
      

    

    


    

    

    

    

    Other Matronics Email List Services
    

    

    

    


  • Post A New Message
    		•   rv10-list@matronics.com
    

  • UN/SUBSCRIBE
    		•   http://www.matronics.com/subscription
    

  • List FAQ
    		•   http://www.matronics.com/FAQ/RV10-List.htm
    

  • Web Forum Interface To Lists
    		•   http://forums.matronics.com
    

  • Matronics List Wiki
    		•   http://wiki.matronics.com
    

  • 7-Day List Browse
    		•   http://www.matronics.com/browse/rv10-list
    

  • Browse RV10-List Digests
    		•   http://www.matronics.com/digest/rv10-list
    

  • Browse Other Lists
    		•   http://www.matronics.com/browse
    

  • Live Online Chat!
    		•   http://www.matronics.com/chat
    

  • Archive Downloading
    		•   http://www.matronics.com/archives
    

  • Photo Share
    		•   http://www.matronics.com/photoshare
    

  • Other Email Lists
    		•   http://www.matronics.com/emaillists
    

  • Contributions
    		•   http://www.matronics.com/contribution
    



    

    


    

    


    
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.


    

    

-- Please support this service by making your Contribution today! --