---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sat 04/03/10: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:34 AM - Re: CHP Stick Grips... company change (jchang10) 2. 10:39 AM - Re: Re: CHP Stick Grips... company change (Bill Mauledriver Watson) 3. 12:32 PM - iPad (Miller John) 4. 02:59 PM - Re: Re: CHP Stick Grips... company change (Don McDonald) 5. 04:00 PM - Re: iPad (Lenny Iszak) 6. 07:27 PM - Re: Re: CHP Stick Grips... company change (Rick) ________________________________ Message 1 _____________________________________ Time: 08:34:48 AM PST US Subject: RV10-List: Re: CHP Stick Grips... company change From: "jchang10" It seems like quite a few people have the Tosten grips in their -10's. Can anyone flying with one of these grips, address whether the forward sweep on the grip is an issue as far as panel interference goes? With that forward sweep, clearly, you get less forward distance until hitting the panel. I'm just not sure if that is a practical concern at all when everything is finally rigged and tested. Thanks! Jae Read this topic online here: http://forums.matronics.com/viewtopic.php?p=292867#292867 ________________________________ Message 2 _____________________________________ Time: 10:39:21 AM PST US From: Bill Mauledriver Watson Subject: Re: RV10-List: Re: CHP Stick Grips... company change I've trial fitted it and found that the stick has to be modified in some way to clear the panel. I bent mine in a press. Others have re-welded it. I'm not sure if any of the stick tops or any of the alternate panel setups end up without requiring some mod of the stick. Bill "pants off the ground" Watson jchang10 wrote: > > It seems like quite a few people have the Tosten grips in their -10's. > > Can anyone flying with one of these grips, address whether the forward sweep on the grip is an issue as far as panel interference goes? > > With that forward sweep, clearly, you get less forward distance until hitting the panel. I'm just not sure if that is a practical concern at all when everything is finally rigged and tested. > > Thanks! > Jae > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=292867#292867 > > > ________________________________ Message 3 _____________________________________ Time: 12:32:30 PM PST US From: Miller John Subject: RV10-List: iPad > > Can't wait for the first user evaluation of the iPad and the > free .pdf approach plates from pdfplates.com! > > This just might be the solution many of us are waiting for! > > grumpy ________________________________ Message 4 _____________________________________ Time: 02:59:19 PM PST US From: Don McDonald Subject: Re: RV10-List: Re: CHP Stick Grips... company change Jae, if you zoom in on the pic attached, you will see what I did to make th em clear the panel... they go right under and clear by at least .050".....N ot that I will ever need to push the stick that far forward.- I might hav e slightly modified the connection on the bottom... just can't remember.- - But they work fine, no issues. Don McDonald --- On Sat, 4/3/10, jchang10 wrote: From: jchang10 Subject: RV10-List: Re: CHP Stick Grips... company change It seems like quite a few people have the Tosten grips in their -10's. Can anyone flying with one of these grips, address whether the forward swee p on the grip is an issue as far as panel interference goes? With that forward sweep, clearly, you get less forward distance until hitti ng the panel. I'm just not sure if that is a practical concern at all when everything is finally rigged and tested. Thanks! Jae Read this topic online here: http://forums.matronics.com/viewtopic.php?p=292867#292867 le, List Admin. =0A=0A=0A ________________________________ Message 5 _____________________________________ Time: 04:00:31 PM PST US Subject: RV10-List: Re: iPad From: "Lenny Iszak" Foreflight just released their high definition, Ipad compatible version, and it looks like it has approach plates. It's a free update too. http://www.foreflight.com/assets/images/content/ffm-ipad/ss/ss_plate.jpg Lenny gengrumpy(at)aol.com wrote: > > > > > Can't wait for the first user evaluation of the iPad and the > > free .pdf approach plates from pdfplates.com! > > > > This just might be the solution many of us are waiting for! > > > > grumpy > > > > > Read this topic online here: http://forums.matronics.com/viewtopic.php?p=292889#292889 ________________________________ Message 6 _____________________________________ Time: 07:27:17 PM PST US From: "Rick" Subject: RE: RV10-List: Re: CHP Stick Grips... company change Jae, I have the CH, now Tosten grips. They work fine and mine just brush the switches and CB's on the panel at full forward. I cut the sticks a low as they would go to install the grips. FWIW, nothing against them but on my next aircraft I'm using the Infinity grips and modify the stick to allow them to not hit the panel. Reason? They just feel nicer to me and the switches have a more tactile feel and are less apt to be inadvertently actuated, my 2 cents as always, Rick Sked N246RS coming close to the magical 100 hours -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of jchang10 Sent: Saturday, April 03, 2010 8:34 AM Subject: RV10-List: Re: CHP Stick Grips... company change It seems like quite a few people have the Tosten grips in their -10's. Can anyone flying with one of these grips, address whether the forward sweep on the grip is an issue as far as panel interference goes? With that forward sweep, clearly, you get less forward distance until hitting the panel. I'm just not sure if that is a practical concern at all when everything is finally rigged and tested. Thanks! Jae Read this topic online here: http://forums.matronics.com/viewtopic.php?p=292867#292867 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.