---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sun 09/05/10: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:17 PM - Flap not bottoming out against rear spar doubler (rv10flyer) 2. 04:54 PM - Flush door handle locks (Eric_Kallio) 3. 04:56 PM - Re: HID Lights (eagerlee) 4. 08:09 PM - Re: Re: HID Lights (Rick Lark) 5. 08:35 PM - Re: Flush door handle locks (Steve DiNieri) 6. 09:11 PM - C-1013 (Michael Kraus) 7. 09:33 PM - Re: C-1013 (Seano) 8. 09:35 PM - Re: C-1013 (Kelly McMullen) 9. 10:25 PM - Re: C-1013 (Dave Leikam) ________________________________ Message 1 _____________________________________ Time: 04:17:53 PM PST US Subject: RV10-List: Flap not bottoming out against rear spar doubler From: "rv10flyer" Ref Pg 23-9, Step 4. I have about 1/16" clearance between rear spar doubler and flap leading edge(reflex position). The flap leading edge is bottoming out against the bottom wing skin before reaching the doubler. I don't want to finish the aileron rigging or move on to the tips until this is resolved. I did check angle between aft top wing skin and flap...it does equal approx 3 degrees. -------- Wayne Gillispie, A&P 5/93, PPC 10/08 Grayson, KY Bldr# 40983 Ord complete kit 8/24/09; DB Sch del 11/20/09 Emp 12/01/09-3/14/10 332 hrs Wings 3/14/10- Read this topic online here: http://forums.matronics.com/viewtopic.php?p=311481#311481 ________________________________ Message 2 _____________________________________ Time: 04:54:47 PM PST US Subject: RV10-List: Flush door handle locks From: "Eric_Kallio" I am getting ready to install the door locks for the flush door handles from IFLYRV10.com. Haven't a clue where I put the instructions, and I can't find them posted on the website. I have searched the archives and found some install pics for the handles, but nothing for the final install of the lock. Anyone have one they can post? Install the locks and glue on the interior fabric and the doors go on for good. Eric Kallio Read this topic online here: http://forums.matronics.com/viewtopic.php?p=311484#311484 ________________________________ Message 3 _____________________________________ Time: 04:56:44 PM PST US Subject: RV10-List: Re: HID Lights From: "eagerlee" hasn't anyone come up with a drop in replacement for the GE4509 that uses LED's and costs less than a hundred bucks? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=311485#311485 ________________________________ Message 4 _____________________________________ Time: 08:09:12 PM PST US From: "Rick Lark" Subject: Re: RV10-List: Re: HID Lights I saw a drop in replacement (someone correct me if I'm wrong) that aeroleds.com had at Airventure. The lumen output was similar to HID's. >From what I gather the length and width of the beam from the led landing lights are the issue (again someone correct me if I'm mistaken). Also I believe the price was significantly more than $100 Rick #40956 ----- Original Message ----- From: "eagerlee" Sent: Sunday, September 05, 2010 7:56 PM Subject: RV10-List: Re: HID Lights > > hasn't anyone come up with a drop in replacement for the GE4509 that uses > LED's and costs less than a hundred bucks? > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=311485#311485 > > > ________________________________ Message 5 _____________________________________ Time: 08:35:57 PM PST US From: "Steve DiNieri" Subject: Re: RV10-List: Flush door handle locks Eric, heres the pdf files. they are in the website in the documents section. I've been meaning to change the site a bit to make it easier to navigate.. steve -------------------------------------------------- From: "Eric_Kallio" Sent: Sunday, September 05, 2010 7:54 PM Subject: RV10-List: Flush door handle locks > > I am getting ready to install the door locks for the flush door handles > from IFLYRV10.com. Haven't a clue where I put the instructions, and I > can't find them posted on the website. I have searched the archives and > found some install pics for the handles, but nothing for the final install > of the lock. Anyone have one they can post? Install the locks and glue on > the interior fabric and the doors go on for good. > > Eric Kallio > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=311484#311484 > > > > Checked by AVG - www.avg.com > 14:34:00 > ________________________________ Message 6 _____________________________________ Time: 09:11:40 PM PST US Subject: RV10-List: C-1013 From: Michael Kraus Any idea where they go? Do not archive..... Sent from my iPhone
________________________________ Message 7 _____________________________________ Time: 09:33:50 PM PST US Subject: Re: RV10-List: C-1013 From: Seano Looks like strut attach brackets? From memory. I could definitely be wrong without looking it up. Sent from my iPhone On Sep 5, 2010, at 22:02, Michael Kraus wrote: > Any idea where they go? > > > Do not archive..... > > Sent from my iPhone > > 

> 
> 
>
________________________________ Message 8 _____________________________________ Time: 09:35:23 PM PST US From: Kelly McMullen Subject: Re: RV10-List: C-1013 Well, the parts listing says they are door strut attach brackets. On 9/5/2010 9:02 PM, Michael Kraus wrote: > Any idea where they go? > > > Do not archive..... > > Sent from my iPhone > > 

>
>
>
________________________________ Message 9 _____________________________________ Time: 10:25:44 PM PST US From: "Dave Leikam" Subject: Re: RV10-List: C-1013 Door gas strut brackets. They attach to the doors. Dave Leikam do not archive ----- Original Message ----- From: "Michael Kraus" Sent: Sunday, September 05, 2010 11:02 PM Subject: RV10-List: C-1013 > Any idea where they go? > -------------------------------------------------------------------------------- > > Do not archive..... > > Sent from my iPhone > > 

>
> href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List
> href="http://forums.matronics.com">http://forums.matronics.com
> href="http://www.matronics.com/contribution">http://www.matronics.com/contribution
>
>
------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.