---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Tue 09/07/10: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:25 AM - Re: injector cleaning (Linn Walters) 2. 05:34 AM - Re: injector cleaning (Kelly McMullen) 3. 12:01 PM - Re: HID Lights (mouser) 4. 12:04 PM - Re: Flush door handle locks (mouser) 5. 12:42 PM - Re: Flush door handle locks (Eric_Kallio) 6. 10:52 PM - Re: Re: Copperstate RV10 Nest 2010 (Deems Davis) ________________________________ Message 1 _____________________________________ Time: 04:25:17 AM PST US From: Linn Walters Subject: Re: RV10-List: injector cleaning Kelly, I can understand your answer if the injectors had been matched to the cylinder previously. Do they come that way from the factory (Lycoming) matched or are the injectors all the same based on engine size??? Linn ..... not a whole lot of injector experience ..... On 9/7/2010 12:43 AM, Kelly McMullen wrote: > > Absolutely. I would suggest cleaning one at a time and at least > starting back into the cylinder it came out of. The only time this > would change would be to swap your first and last to peak injectors to > try for more balance. Hoppes No. 9 is probably the fastest working > cleaner, but is aggressive enough you don't want to leave an injector > in it much more than 30 min. > > > On 9/6/2010 9:26 PM, DLM wrote: >> I plan to clean the injectors tomorrow. Does anyone remember whether >> they should be put back in the same cylinder from which they were >> removed? >> * >> >> >> * > > ________________________________ Message 2 _____________________________________ Time: 05:34:08 AM PST US Subject: Re: RV10-List: injector cleaning From: Kelly McMullen The injectors from the factory are all a single nominal size, within tolerances. But, that does not mean they are identical. If your engine runs LOP with the injectors in present location, why risk screwing that up? If each cylinder flowed air identically, and each injector flowed identically, GAMI and AFM would never need to provide injectors with slightly differing flow. On Tue, Sep 7, 2010 at 4:18 AM, Linn Walters wrote: > > Kelly, I can understand your answer if the injectors had been matched to > the cylinder previously. > Do they come that way from the factory (Lycoming) matched or are the > injectors all the same based on engine size??? > Linn ..... not a whole lot of injector experience ..... > > On 9/7/2010 12:43 AM, Kelly McMullen wrote: >> >> >> Absolutely. I would suggest cleaning one at a time and at least starting >> back into the cylinder it came out of. The only time this would change would >> be to swap your first and last to peak injectors to try for more balance. >> Hoppes No. 9 is probably the fastest working cleaner, but is aggressive >> enough you don't want to leave an injector in it much more than 30 min. >> >> >> On 9/6/2010 9:26 PM, DLM wrote: >>> >>> I plan to clean the injectors tomorrow. Does anyone remember whether they >>> should be put back in the same cylinder from which they were removed? >>> * >>> >>> >>> * >> >> >> >> >> > > ________________________________ Message 3 _____________________________________ Time: 12:01:34 PM PST US Subject: RV10-List: Re: HID Lights From: "mouser" Yeah AeroLEDs has a PAR36 lamp that fits in the DW mounts, but they are $500 a pop. Never need replacing... but you'd have to fly HIDs for a long time before you needed $500 worth of replacement bulbs. -------- RV-10 #40988 http://mouser.org/projects/rv-10/ KLAM Read this topic online here: http://forums.matronics.com/viewtopic.php?p=311720#311720 ________________________________ Message 4 _____________________________________ Time: 12:04:05 PM PST US Subject: RV10-List: Re: Flush door handle locks From: "mouser" Hi Eric, Just to clarify, do the iflyrv10 flush handles work with the 180 degree planearound latch system? Or just the 90 degree (i.e. without the delayed pin extension feature)? -M -------- RV-10 #40988 http://mouser.org/projects/rv-10/ KLAM Read this topic online here: http://forums.matronics.com/viewtopic.php?p=311721#311721 ________________________________ Message 5 _____________________________________ Time: 12:42:04 PM PST US Subject: RV10-List: Re: Flush door handle locks From: "Eric_Kallio" Ahhhhh. Sorry, can't answer that one. I have the 90 degree. Eric Read this topic online here: http://forums.matronics.com/viewtopic.php?p=311723#311723 ________________________________ Message 6 _____________________________________ Time: 10:52:11 PM PST US From: Deems Davis Subject: Re: RV10-List: Re: Copperstate RV10 Nest 2010 Myron, Just getting caught up on email. I'll probably only attend on Sat, so my vote is for Sat. If I can help in any way please let me know. Deems On 9/2/2010 11:00 AM, woxofswa wrote: > --> RV10-List message posted by: "woxofswa" > > There has been a request to do the meal on Friday night instead of Sat noon. I am happy either way and will go with the preferences of the majority of those planning to attend. > > -------- > Myron Nelson > Mesa, AZ > Emp completed, QB wings completed, legacy build fuse in progress > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=311102#311102 > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.