RV10-List Digest Archive

Sun 09/12/10


Total Messages Posted: 8



Today's Message Index:
----------------------
 
     1. 06:45 AM - Re: LED Nav Lights (Pascal)
     2. 09:32 AM - Re: RV-List: LED Nav Lights (Terry Mortimore)
     3. 10:42 AM - Re: Re: RV-List: LED Nav Lights (Sean Stephens)
     4. 05:08 PM - Part Numbers for IO540 D4A5 (Roxanne and Mike Lefever)
     5. 06:12 PM - Re: Part Numbers for IO540 D4A5 (Michael Kraus)
     6. 07:14 PM - Re: Part Numbers for IO540 D4A5 (Kelly McMullen)
     7. 08:11 PM - Re: Part Numbers for IO540 D4A5 (Kelly McMullen)
     8. 08:13 PM - LED Nav lights (Rick Lark)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:45:32 AM PST US
    From: "Pascal" <rv10builder@verizon.net>
    Subject: Re: LED Nav Lights
    credit to Pete Howell- check VAF for instructions: http://picasaweb.google.com/fly.rv9A/NavLights# I used this method and my lights look as good as the pictures. Pascal From: Rick Lark Sent: Saturday, September 11, 2010 7:05 PM Subject: Re: RV10-List: LED Nav Lights Robin I've been thinking of buying LED nav and strobes from either Aveo or Aero Leds. Their products certainly are nice but pricey. I'm sure I could fabricate the nav leds, but with your application, are the strobes in your pictures the standard strobes we all have seen/used for the last 15 years, or something else? Rick #40956 Southampton, Ont - On Sat, 9/11/10, Robin Marks <robin@PaintTheWeb.com> wrote: From: Robin Marks <robin@PaintTheWeb.com> Subject: RV10-List: LED Nav Lights To: rv10-list@matronics.com, rv-list@matronics.com Received: Saturday, September 11, 2010, 6:03 AM For some time I have mentioned the =9Cdiscount=9D way I was going about adding LED Nav lights to my RV-8A build. After having spent $220 on my first set of LED=99s for the -10 (which still required modifications http://painttheweb.com/painttheweb/rv-10/Lights_LEDHID.aspx ) I decided to fabricate some Red/Green Nav lights out of Auto parts. The lights were purchased on eBay for well under $10.00 each. The sockets were maybe $3.00 each and the Red Green Mirrored plexi was about $8.00 delivered. I think they turned out great. They are definitely brighter than my -10 Nav lights and many people comment on how noticeable my -10 nav lights are on the ground and in flight. Here are a few photos of the Nav lights installed. Note these are older Vans wing tips so we had to cut away the corners and replace them with aero tips. Photos here: http://picasaweb.google.com/marks.robin/RV8AN880EE# Robin RV-4 Sold RV-6A Sold RV-10 170 Hours RV-8A Flying by years end (or else!) =nofollow target=_blank>http://www.matronics.com/Navigator?RV10-List et=_blank>http://forums.matronics.com llow target=_blank>http://www.matronics.com/contribution


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:32:46 AM PST US
    From: "Terry Mortimore" <terry.mortimore@shaw.ca>
    Subject: Re: RV-List: LED Nav Lights
    Hi Robin, I apologize for not following this thread as closely as I should have. The lights really look good, I've looked in the archive but can't find any previous notes regarding the lights you used. A ebay search came up with 200,000 hits, can you give us some light descriptions or part numbers to help a brother builder out? I see on ebay white and red LED lights but no Green. Do you relie on the green and red mirrored plexi for the colour or are green bulbs available? Can you point us in the right direction for the coloured plexi? Is the second bulb in your installation a strobe? If so are these roll your own as well? Thanks in advance, Terry. ----- Original Message ----- From: Robin Marks To: rv10-list@matronics.com ; rv-list@matronics.com Sent: Saturday, September 11, 2010 2:03 AM Subject: RV-List: LED Nav Lights For some time I have mentioned the =93discount=94 way I was going about adding LED Nav lights to my RV-8A build. After having spent $220 on my first set of LED=92s for the -10 (which still required modifications http://painttheweb.com/painttheweb/rv-10/Lights_LEDHID.aspx ) I decided to fabricate some Red/Green Nav lights out of Auto parts. The lights were purchased on eBay for well under $10.00 each. The sockets were maybe $3.00 each and the Red Green Mirrored plexi was about $8.00 delivered. I think they turned out great. They are definitely brighter than my -10 Nav lights and many people comment on how noticeable my -10 nav lights are on the ground and in flight. Here are a few photos of the Nav lights installed. Note these are older Vans wing tips so we had to cut away the corners and replace them with aero tips. Photos here: http://picasaweb.google.com/marks.robin/RV8AN880EE# Robin RV-4 Sold RV-6A Sold RV-10 170 Hours RV-8A Flying by years end (or else!)


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:42:43 AM PST US
    From: Sean Stephens <sean@stephensville.com>
    Subject: Re: RV-List: LED Nav Lights
    Just to throw another vendor option out there. I've gone this route http://www.jeffsrv-7a.com/LEDPROJECT1.htm after seeing Deems' installation. And here's how they turned out... http://rv10.stephensville.com/2010/05/10/wingtip-nav-lights/ And here's Deems' pics: http://www.mykitlog.com/users/display_log.php?user=DeemsDavis&project=41&category=1387&log=10822&row=1 Jeff is great to work with, but not sure if he is still producing them. I'd shoot him an email if you are interested. -Sean #40303 fuse side skins On 9/12/10 11:28 AM, Terry Mortimore wrote: > Hi Robin, I apologize for not following this thread as closely as I > should have. > The lights really look good, I've looked in the archive but can't find > any previous notes regarding the lights you used. > A ebay search came up with 200,000 hits, can you give us some light > descriptions or part numbers to help a brother builder out? > I see on ebay white and red LED lights but no Green. Do you relie on > the green and red mirrored plexi for the colour or are green bulbs > available? > Can you point us in the right direction for the coloured plexi? > Is the second bulb in your installation a strobe? If so are these roll > your own as well? > > Thanks in advance, Terry. > > ----- Original Message ----- > *From:* Robin Marks <mailto:robin@PaintTheWeb.com> > *To:* rv10-list@matronics.com <mailto:rv10-list@matronics.com> ; > rv-list@matronics.com <mailto:rv-list@matronics.com> > *Sent:* Saturday, September 11, 2010 2:03 AM > *Subject:* RV-List: LED Nav Lights > > For some time I have mentioned the discount way I was going > about adding LED Nav lights to my RV-8A build. After having spent > $220 on my first set of LEDs for the -10 (which still required > modifications > http://painttheweb.com/painttheweb/rv-10/Lights_LEDHID.aspx ) I > decided to fabricate some Red/Green Nav lights out of Auto parts. > The lights were purchased on eBay for well under $10.00 each. The > sockets were maybe $3.00 each and the Red Green Mirrored plexi was > about $8.00 delivered. I think they turned out great. They are > definitely brighter than my -10 Nav lights and many people comment > on how noticeable my -10 nav lights are on the ground and in flight. > > Here are a few photos of the Nav lights installed. Note these are > older Vans wing tips so we had to cut away the corners and replace > them with aero tips. > > Photos here: > > http://picasaweb.google.com/marks.robin/RV8AN880EE# > <http://picasaweb.google.com/marks.robin/RV8AN880EE> > > Robin > > RV-4 Sold > > RV-6A Sold > > RV-10 170 Hours > > RV-8A Flying by years end (or else!) >


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:08:28 PM PST US
    From: Roxanne and Mike Lefever <roxianmike@msn.com>
    Subject: Part Numbers for IO540 D4A5
    I am trying to verify that an engine kit I am considering buying will clear the engine mount adequately.............does anyone have access to the par t number for the sump on the D4A5?


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:12:10 PM PST US
    Subject: Re: Part Numbers for IO540 D4A5
    From: Michael Kraus <n223rv@wolflakeairport.net>


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:14:22 PM PST US
    Subject: Re: Part Numbers for IO540 D4A5
    From: Kelly McMullen <apilot2@gmail.com>
    Parts manual I have shows 72056 On Sun, Sep 12, 2010 at 6:08 PM, Michael Kraus <n223rv@wolflakeairport.net>wrote: > >


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:11:57 PM PST US
    Subject: Re: Part Numbers for IO540 D4A5
    From: Kelly McMullen <apilot2@gmail.com>
    Make that an LW-13901 On Sun, Sep 12, 2010 at 7:11 PM, Kelly McMullen <apilot2@gmail.com> wrote: > Parts manual I have shows 72056 > > On Sun, Sep 12, 2010 at 6:08 PM, Michael Kraus <n223rv@wolflakeairport.net > > wrote: > >> >> >> >


    Message 8


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:13:34 PM PST US
    From: Rick Lark <larkrv10@yahoo.ca>
    Subject: LED Nav lights
    Ok guys, so now I'm really confused - Certainly Jeffsrv-7a leds are impresive.- No questions there. - I was of the opinion that the new type of LED-strobes would eliminate elc trical noise isues that the old strobes had.- Or, is- it a none issue?? - Deems, I need to ask.- Your coment on your site with regards to being "pu t off by the "circuit boards and electronic components hanging out exposed" ,- does that apply to the Aveo and Aero Led systems?- - Anyway all opinions/options are still welcome.- Thx. - Rick #40956 Southampton, Ont -=0A=0A




    Other Matronics Email List Services

  • Post A New Message
  •   rv10-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/RV10-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/rv10-list
  • Browse RV10-List Digests
  •   http://www.matronics.com/digest/rv10-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --