---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Thu 09/30/10: 19 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:14 AM - Where to buy this (Michael Wellenzohn) 2. 03:43 AM - Re: Lower cowling slot (Kelly McMullen) 3. 05:10 AM - Re: Where to buy this (George, Neal E Capt USAF ACC 505 TRS/DOJ) 4. 07:25 AM - 4" aluminum flanges (Carl Froehlich) 5. 07:28 AM - Re: Where to buy this (Daniel Schmid) 6. 07:34 AM - Re: Where to buy this (Albert Gardner) 7. 07:39 AM - Re: 4" aluminum flanges (tsts4) 8. 07:43 AM - Re: 4" aluminum flanges (Jesse Saint) 9. 08:37 AM - Re: Re: 4" aluminum flanges (Carl Froehlich) 10. 09:17 AM - Re: Re: 4" aluminum flanges (Rob Kochman) 11. 09:44 AM - Re: Where to buy this (Lenny Iszak) 12. 10:05 AM - Re: Re: 4" aluminum flanges (Carl Froehlich) 13. 01:25 PM - Re: performance (marcausman) 14. 07:40 PM - I did it! (Werner Schneider) 15. 08:31 PM - Re: I did it! (Tim Olson) 16. 08:42 PM - Re: I did it! (Robin Marks) 17. 11:00 PM - Re: I did it! (Werner Schneider) 18. 11:24 PM - Re: I did it! (Michael Wellenzohn) 19. 11:28 PM - Re: Where to buy this (Michael Wellenzohn) ________________________________ Message 1 _____________________________________ Time: 03:14:19 AM PST US Subject: RV10-List: Where to buy this From: "Michael Wellenzohn" Hi there Does anyone know where to get these steel clamps? Aircraftspruce doesn't have them. MS21333-75 Clamp MS21333-69 Clamp .38id Cheers Michael -------- RV-10 builder (interior,avionics, wiring) #511 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=314200#314200 ________________________________ Message 2 _____________________________________ Time: 03:43:56 AM PST US Subject: Re: RV10-List: Lower cowling slot From: Kelly McMullen Well, things will run hotter ROP than LOP. I'd try LOP to get the CHT down, which should be good for 20-30 degrees by itself. I assume you are using 2300 rpm looking for economy. At that altitude, the lower rpm limits power available and I believe you get less cooling. I would use at least 2500 rpm when above 10,000 and see if that helps cooling at all. With your compression, and the Lightspeed advancing the timing, using a lower rpm is like putting your car in overdrive with full throttle...it puts more of a load on everything than going the same speed at higher rpm. On Thu, Sep 30, 2010 at 12:43 AM, Albert Gardner wrote: > Now that several of us are working on this problem maybe a solution will > appear. > > that latest data I recorded was on a flight from Maderia, CA back to Yuma > during cruise on Aug. 15th: > > 128 IAS, 160 TAS, 55f OAT, 207f Oil, 11,500', 2300 RPM. 19.6" MAP, 12.3 GPH > ROP > > #1 396, 387, 348, 345, 373, 369 > > #1 1339, 1289, 1323, 1246, 1284, 1324 > > > The addition of the cowl flaps helped keep oil temps down on climb by about > 5-10 degrees. Before I installed them I found it very difficult to keep oil > temps down with high ground temps and any delay in TO. I had them go to > 230-35 before I could drop the nose and get some airspeed if I had prolonged > taxi time. > > Now I'm going to replace the temp cowl flaps with glass ones that look a > little better. However I don't see any way they can retract. > > ________________________________ Message 3 _____________________________________ Time: 05:10:03 AM PST US Subject: RE: RV10-List: Where to buy this From: "George, Neal E Capt USAF ACC 505 TRS/DOJ" Michael - Try Genuine Aircraft Hardware: http://www.gen-aircraft-hardware.com/ neal ============== Hi there Does anyone know where to get these steel clamps? Aircraftspruce doesn't have them. MS21333-75 =C2- =C2- Clamp =C2- =C2- MS21333-69 =C2- =C2- Clamp .38id Cheers Michael -------- RV-10 builder (interior,avionics, wiring) #511 ________________________________ Message 4 _____________________________________ Time: 07:25:59 AM PST US From: "Carl Froehlich" Subject: RV10-List: 4" aluminum flanges Looking for a place to get 4" aluminum flanges for the oil cooler hose. Recommendations? Carl Froehlich ________________________________ Message 5 _____________________________________ Time: 07:28:20 AM PST US From: Daniel Schmid Subject: RE: RV10-List: Where to buy this Hallo Michael meinst du diese http://www.electronicsurplus.com/Item/144219/ gr=FCsse Daniel > Subject: RV10-List: Where to buy this > From: rv-10@wellenzohn.net > Date: Thu=2C 30 Sep 2010 03:11:07 -0700 > To: rv10-list@matronics.com > et> > > Hi there > Does anyone know where to get these steel clamps? Aircraftspruce doesn't have them. > MS21333-75 =C2 =C2 Clamp =C2 =C2 MS21333-69 =C2 =C2 Clamp .38id > > Cheers > Michael > > -------- > RV-10 builder (interior=2Cavionics=2C wiring) > #511 > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=314200#314200 > > > > > > > =========== =========== =========== =========== > > > ________________________________ Message 6 _____________________________________ Time: 07:34:04 AM PST US From: "Albert Gardner" Subject: RE: RV10-List: Where to buy this These guys have some of the most detailed info (pictures and descriptions) of aircraft hardware I know of plus they are a source for the stuff also. I imagine most of the major suppliers carry the same stuff. http://www.gen-aircraft-hardware.com/ Albert Gardner N991RV Yuma, AZ -----Original Message----- Hi there Does anyone know where to get these steel clamps? Aircraftspruce doesn't have them. MS21333-75 Clamp MS21333-69 Clamp .38id Cheers Michael ________________________________ Message 7 _____________________________________ Time: 07:39:46 AM PST US Subject: RV10-List: Re: 4" aluminum flanges From: "tsts4" Carl, ACS has 4" flanges for a 3" hose. Not sure if this is exactly what you are looking for: http://www.aircraftspruce.com/catalog/appages/ductflanges.php -------- Todd Stovall 728TT (reserved) RV-10 Empacone, Wings, Fuse Read this topic online here: http://forums.matronics.com/viewtopic.php?p=314219#314219 ________________________________ Message 8 _____________________________________ Time: 07:43:27 AM PST US From: Jesse Saint Subject: Re: RV10-List: 4" aluminum flanges Will the Van's part not work? You could just order another from Van's and possibly slightly modify it if necessary and use it. do not archive Jesse Saint Saint Aviation, Inc. jesse@saintaviation.com C: 352-427-0285 F: 815-377-3694 On Sep 30, 2010, at 10:22 AM, Carl Froehlich wrote: > Looking for a place to get 4=94 aluminum flanges for the oil cooler hose. Recommendations? > > Carl Froehlich > > > > > ________________________________ Message 9 _____________________________________ Time: 08:37:37 AM PST US From: "Carl Froehlich" Subject: RE: RV10-List: Re: 4" aluminum flanges Thanks - but I'm looking for a flange to do a 4" hose. Looking at "The List" on Van's site he has a part VA-187 as "4" flanged duct". I assume this is part of the firewall forward kit that I'm not using. Carl -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of tsts4 Sent: Thursday, September 30, 2010 10:37 AM Subject: RV10-List: Re: 4" aluminum flanges Carl, ACS has 4" flanges for a 3" hose. Not sure if this is exactly what you are looking for: http://www.aircraftspruce.com/catalog/appages/ductflanges.php -------- Todd Stovall 728TT (reserved) RV-10 Empacone, Wings, Fuse Read this topic online here: http://forums.matronics.com/viewtopic.php?p=314219#314219 ________________________________ Message 10 ____________________________________ Time: 09:17:46 AM PST US Subject: Re: RV10-List: Re: 4" aluminum flanges From: Rob Kochman That's correct. It's in the foreground of the picture here: http://kochman.net/N819K/wp-content/uploads/2010/05/img_1705.jpg On Thu, Sep 30, 2010 at 8:29 AM, Carl Froehlich wrote: > carl.froehlich@verizon.net> > > Thanks - but I'm looking for a flange to do a 4" hose. > > Looking at "The List" on Van's site he has a part VA-187 as "4" flanged > duct". I assume this is part of the firewall forward kit that I'm not > using. > > Carl > > -----Original Message----- > From: owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] On Behalf Of tsts4 > Sent: Thursday, September 30, 2010 10:37 AM > To: rv10-list@matronics.com > Subject: RV10-List: Re: 4" aluminum flanges > > > Carl, > ACS has 4" flanges for a 3" hose. Not sure if this is exactly what you are > looking for: > > http://www.aircraftspruce.com/catalog/appages/ductflanges.php > > -------- > Todd Stovall > 728TT (reserved) > RV-10 Empacone, Wings, Fuse > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=314219#314219 > > -- Rob Kochman RV-10 "Finishing" Kit Woodinville, WA (near Seattle) http://kochman.net/N819K ________________________________ Message 11 ____________________________________ Time: 09:44:44 AM PST US Subject: RV10-List: Re: Where to buy this From: "Lenny Iszak" True, they have pretty much everything, but don't try to even look at their website on Saturdays, just when you need it most, cause it's "closed". Lenny Albert Gardner wrote: > These guys have some of the most detailed info (pictures and descriptions) > of aircraft hardware I know of plus they are a source for the stuff also. I > imagine most of the major suppliers carry the same stuff. > http://www.gen-aircraft-hardware.com/ > Albert Gardner > N991RV > Yuma, AZ > > > -- Read this topic online here: http://forums.matronics.com/viewtopic.php?p=314232#314232 ________________________________ Message 12 ____________________________________ Time: 10:05:32 AM PST US From: "Carl Froehlich" Subject: RE: RV10-List: Re: 4" aluminum flanges Thanks! Carl From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Rob Kochman Sent: Thursday, September 30, 2010 12:14 PM Subject: Re: RV10-List: Re: 4" aluminum flanges That's correct. It's in the foreground of the picture here: http://kochman.net/N819K/wp-content/uploads/2010/05/img_1705.jpg On Thu, Sep 30, 2010 at 8:29 AM, Carl Froehlich wrote: Thanks - but I'm looking for a flange to do a 4" hose. Looking at "The List" on Van's site he has a part VA-187 as "4" flanged duct". I assume this is part of the firewall forward kit that I'm not using. Carl -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of tsts4 Sent: Thursday, September 30, 2010 10:37 AM Subject: RV10-List: Re: 4" aluminum flanges Carl, ACS has 4" flanges for a 3" hose. Not sure if this is exactly what you are looking for: http://www.aircraftspruce.com/catalog/appages/ductflanges.php -------- Todd Stovall 728TT (reserved) RV-10 Empacone, Wings, Fuse Read this topic online here: http://forums.matronics.com/viewtopic.php?p=314219#314219 = Use the Matronics List Features Navigator to browse s.com/Navigator?RV10-List" target="_blank">http://www.matronics.com/Navigator?RV10-List ronics.com/" target="_blank">http://forums.matronics.com Matt Dralle, List Admin. ==== -- Rob Kochman RV-10 "Finishing" Kit Woodinville, WA (near Seattle) http://kochman.net/N819K ________________________________ Message 13 ____________________________________ Time: 01:25:14 PM PST US Subject: RV10-List: Re: performance From: "marcausman" We've had zero issues with anyone who has installed the Autotrim module and the VP system. They work well together and a link is posted earlier showing how they are wired together. As with the TCW system or if you use mechanical relays, the TT autotrim system takes control away from our system to make its own adjustments. If the TT autotrim system runs away there is no way to stop it other than to pull power to the TT autotrim module. If you want a failsafe switch then put one in series bw the trim motor and whatever controller is closest in the wiring. That switch can stop the motor from running but cannot allow you to run the trim motor back. The VP system DOES have runaway trim protection, variable speed trim, backup trim controls, trim position indicator, and trim fault checking on startup. And with rock-simple wiring. -------- Marc Ausman http://www.verticalpower.com "Move up to a modern electrical system" RV-7 IO-390 Flying Read this topic online here: http://forums.matronics.com/viewtopic.php?p=314239#314239 ________________________________ Message 14 ____________________________________ Time: 07:40:46 PM PST US From: Werner Schneider Subject: RV10-List: I did it! After lurking for 5 years 6 month and 6 days, visiting several times a 10 under construction, asking a lot of questions the last 10 days and getting the approval of my wife! (and a good exchange rate) I've ordered yesterday night my kit Werner Glastar #5794 HB-YKP 502hrs RV-10 #41122 on order since 23h 05 min ________________________________ Message 15 ____________________________________ Time: 08:31:59 PM PST US Subject: Re: RV10-List: I did it! From: Tim Olson Cool! What's your kit number? Tim Do not archive On Sep 30, 2010, at 4:09 PM, Werner Schneider wrote: > > After lurking for 5 years 6 month and 6 days, visiting several times a 10 under construction, asking a lot of questions the last 10 days and getting the approval of my wife! (and a good exchange rate) > > I've ordered yesterday night my kit > > Werner > > Glastar #5794 HB-YKP 502hrs > RV-10 #41122 on order since 23h 05 min > > > > ________________________________ Message 16 ____________________________________ Time: 08:42:48 PM PST US From: Robin Marks Subject: Re: RV10-List: I did it! >> 41122 Sent from my iPad Wahoo! On Sep 30, 2010, at 8:29 PM, Tim Olson wrote: > > Cool! What's your kit number? > Tim > Do not archive > > > On Sep 30, 2010, at 4:09 PM, Werner Schneider wrote: > >> >> After lurking for 5 years 6 month and 6 days, visiting several times a 10 under construction, asking a lot of questions the last 10 days and getting the approval of my wife! (and a good exchange rate) >> >> I've ordered yesterday night my kit >> >> Werner >> >> Glastar #5794 HB-YKP 502hrs >> RV-10 #41122 on order since 23h 05 min >> >> >> >> > > ________________________________ Message 17 ____________________________________ Time: 11:00:47 PM PST US From: Werner Schneider Subject: Re: RV10-List: I did it! They gave me a very fine one, easy to remember ;) The 1st time of one Van's aircraft and the 2nd airplane I've built out of 2 :) (4)1122 Thanks Tim for answering all my questions the last 10 days! Werner Glastar #5794 HB-YKP 502hrs RV-10 #41122 on order since 31h 52 min do not archive On 01.10.2010 05:29, Tim Olson wrote: > --> RV10-List message posted by: Tim Olson > > Cool! What's your kit number? ________________________________ Message 18 ____________________________________ Time: 11:24:56 PM PST US Subject: RV10-List: Re: I did it! From: "Michael Wellenzohn" Congrats again from me as well! Swiss RV-10 population is growing :-) Michael -------- RV-10 builder (interior,avionics, wiring) #511 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=314295#314295 ________________________________ Message 19 ____________________________________ Time: 11:28:12 PM PST US Subject: RV10-List: Re: Where to buy this From: "Michael Wellenzohn" Thanks guys, great websites, and looks I'll find even more there. Cheers Michael DO NOT ARCHIVE -------- RV-10 builder (interior,avionics, wiring) #511 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=314296#314296 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.