---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sat 10/02/10: 10 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:59 AM - Re: I did it! (Perry Casson) 2. 05:56 AM - Re: Re: I did it! (Werner Schneider) 3. 12:45 PM - N410BL moves to the airport (Bob Leffler) 4. 02:26 PM - Re: N410BL moves to the airport (gary) 5. 04:50 PM - Re: N410BL moves to the airport (Bob Leffler) 6. 05:19 PM - Rear heat - Sealing rear bulkhead (n277dl) 7. 06:33 PM - Re: Re: I did it! (John Jessen) 8. 07:25 PM - Re: Re: I did it! (DLM) 9. 07:56 PM - Re: N410BL moves to the airport (gary) 10. 09:57 PM - Re: N410BL moves to the airport (Bill Watson) ________________________________ Message 1 _____________________________________ Time: 04:59:29 AM PST US From: Perry Casson Subject: RV10-List: RE: I did it! Congratulations Werner! And welcome to the exclusive Glastar/RV-10 builders club. Hope you enjoy the -10 construction process as much as I did and you'll have a fine, 4 seat, going places airplane when you are done. Perry Casson Regina Canada Glastar C-GSPC RV-10 C-FMHP ________________________________ Message 2 _____________________________________ Time: 05:56:01 AM PST US From: Werner Schneider Subject: Re: RV10-List: RE: I did it! Thanks Perry, I guess so, after 7 years of abstinence my fingers are itching to get that drum again :) Did you manage to keep the Glastar and the 10 and if how :) Cheers Werner Glastar #5794 HB-YKP RV-10 #41122 on order On 02.10.2010 13:55, Perry Casson wrote: > --> RV10-List message posted by: Perry Casson > > Congratulations Werner! And welcome to the exclusive Glastar/RV-10 builders > club. Hope you enjoy the -10 construction process as much as I did and > you'll have a fine, 4 seat, going places airplane when you are done. > > Perry Casson > Regina Canada > > Glastar C-GSPC > RV-10 C-FMHP > > ________________________________ Message 3 _____________________________________ Time: 12:45:57 PM PST US From: "Bob Leffler" Subject: RV10-List: N410BL moves to the airport My garage wasn't long enough to mount the engine and put the landing gear on, so I leased a hangar this month. This morning we moved everything to the KDLZ. With a large group of friends, EAA'ers, and RV'ers the move happened without a hitch. We loaded the all the aircraft parts on the rental truck and everything else in Phil Newlon's trailer. This enabled a single trip to the airport. We started loading at 8:00am and finished unloading by 10:45am. Everyone was home in time to see the Buckeyes beat Illinois. The fuselage was loaded first. Description: http://www.kitlog.com/photos/project_260/full/FP02102010A00024.jpg Everything arrived safely at the airport. Description: http://www.kitlog.com/photos/project_260/full/FP02102010A00025.jpg A successful move. Thanks to Dave Coventry, Janice Leffler, Ian Bergstrom, Brad Leffler, Ryan Kay, Tom Webster, John Blakely, Greg Schroeder, Rory, Ron Giesman, Mike Cencula, Brent Owens, Phil Newlon, Steve Carr, and Renee Leffler. Description: http://www.kitlog.com/photos/project_260/full/FP02102010A00026.jpg ________________________________ Message 4 _____________________________________ Time: 02:26:58 PM PST US From: "gary" Subject: RE: RV10-List: N410BL moves to the airport Hopefully you won't have to drive far. The time you have to work will be noticeable Congratulations on your progress Gary Specketer owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bob Leffler Sent: Saturday, October 02, 2010 3:40 PM Subject: RV10-List: N410BL moves to the airport My garage wasn't long enough to mount the engine and put the landing gear on, so I leased a hangar this month. This morning we moved everything to the KDLZ. With a large group of friends, EAA'ers, and RV'ers the move happened without a hitch. We loaded the all the aircraft parts on the rental truck and everything else in Phil Newlon's trailer. This enabled a single trip to the airport. We started loading at 8:00am and finished unloading by 10:45am. Everyone was home in time to see the Buckeyes beat Illinois. The fuselage was loaded first. Description: http://www.kitlog.com/photos/project_260/full/FP02102010A00024.jpg Everything arrived safely at the airport. Description: http://www.kitlog.com/photos/project_260/full/FP02102010A00025.jpg A successful move. Thanks to Dave Coventry, Janice Leffler, Ian Bergstrom, Brad Leffler, Ryan Kay, Tom Webster, John Blakely, Greg Schroeder, Rory, Ron Giesman, Mike Cencula, Brent Owens, Phil Newlon, Steve Carr, and Renee Leffler. Description: http://www.kitlog.com/photos/project_260/full/FP02102010A00026.jpg ________________________________ Message 5 _____________________________________ Time: 04:50:11 PM PST US From: "Bob Leffler" Subject: RE: RV10-List: N410BL moves to the airport DLZ is about 12 miles directly north of the house and about 20 miles from the office. The hangar is about half way between the office and the house. Drive time and meals will definitely impact the time, but it was getting next to impossible to work in the garage. There was no way that I could have hung the engine in the garage. Then when you add another winter approaching, getting Janice's car back in the garage gets significant brownie points. Bob Do not archive From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of gary Sent: Saturday, October 02, 2010 5:23 PM Subject: RE: RV10-List: N410BL moves to the airport Hopefully you won't have to drive far. The time you have to work will be noticeable Congratulations on your progress Gary Specketer ________________________________ Message 6 _____________________________________ Time: 05:19:03 PM PST US Subject: RV10-List: Rear heat - Sealing rear bulkhead From: "n277dl" Flew a couple local guys from SE IA to Manhattan, KS today to pick up a Tri-Pacer. Coming back at 7500 ft, it was 28f. Guess winter is on it's way :( Couple questions..... I get plenty of heat a the feet of the rear passengers. Has anyone made any type of defuser to re-direct the heat? How about sealing off any drafts from the rear of the plane? Seemed like there was cool air coming from the rear to the front. I don't seem to have any air leaks around the doors. btw... Aren't we blessed with a great cross country plane. I have about 100 hours since first flight on Memorial Day. Been to Atlanta a couple times, San Antonio once, Milwaukee once, Minneapolis once, home to Muscle Shoals, Al a couple times and all parts in between. Just have to get it ready to fly in the winter now. Doug -------- Doug "Fools" are always more creative than process people and will always find ways to ruin a perfectly good set of processes. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=314431#314431 ________________________________ Message 7 _____________________________________ Time: 06:33:42 PM PST US From: John Jessen Subject: Re: RV10-List: RE: I did it! Hey. I resemble that remark! ...via phone On Oct 2, 2010, at 4:55 AM, Perry Casson wrote: > > Congratulations Werner! And welcome to the exclusive Glastar/RV-10 builders > club. Hope you enjoy the -10 construction process as much as I did and > you'll have a fine, 4 seat, going places airplane when you are done. > > Perry Casson > Regina Canada > > Glastar C-GSPC > RV-10 C-FMHP > > > > > > ________________________________ Message 8 _____________________________________ Time: 07:25:52 PM PST US From: "DLM" Subject: Re: RV10-List: RE: I did it! me too; sold the Glastar in March (now has 830TT) 10 now has 330TT. ----- Original Message ----- From: "John Jessen" Sent: Saturday, October 02, 2010 6:25 PM Subject: Re: RV10-List: RE: I did it! > > Hey. I resemble that remark! > > ...via phone > > On Oct 2, 2010, at 4:55 AM, Perry Casson wrote: > >> >> Congratulations Werner! And welcome to the exclusive Glastar/RV-10 >> builders >> club. Hope you enjoy the -10 construction process as much as I did and >> you'll have a fine, 4 seat, going places airplane when you are done. >> >> Perry Casson >> Regina Canada >> >> Glastar C-GSPC >> RV-10 C-FMHP >> >> >> >> >> >> > > > ________________________________ Message 9 _____________________________________ Time: 07:56:02 PM PST US From: "gary" Subject: RE: RV10-List: N410BL moves to the airport Brownie points are good!!! They have a high return on investment. Gary Specketer _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bob Leffler Sent: Saturday, October 02, 2010 7:45 PM Subject: RE: RV10-List: N410BL moves to the airport DLZ is about 12 miles directly north of the house and about 20 miles from the office. The hangar is about half way between the office and the house. Drive time and meals will definitely impact the time, but it was getting next to impossible to work in the garage. There was no way that I could have hung the engine in the garage. Then when you add another winter approaching, getting Janice's car back in the garage gets significant brownie points. Bob Do not archive From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of gary Sent: Saturday, October 02, 2010 5:23 PM Subject: RE: RV10-List: N410BL moves to the airport Hopefully you won't have to drive far. The time you have to work will be noticeable Congratulations on your progress Gary Specketer ________________________________ Message 10 ____________________________________ Time: 09:57:34 PM PST US From: Bill Watson Subject: Re: RV10-List: N410BL moves to the airport sounds like a fresh work rhythm is in order.... congrats on the movement towards flight! Bill "waiting on epoxy primer to infuse" Watson On 10/2/2010 7:45 PM, Bob Leffler wrote: > > DLZ is about 12 miles directly north of the house and about 20 miles > from the office. The hangar is about half way between the office and > the house. Drive time and meals will definitely impact the time, but > it was getting next to impossible to work in the garage. There was no > way that I could have hung the engine in the garage. Then when you > add another winter approaching, getting Janice's car back in the > garage gets significant brownie points. > > Bob > > Do not archive > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.