---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sat 12/04/10: 12 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:30 AM - Re: Re: Flightline interior w/ alternative door seals (davidsoutpost@comcast.net) 2. 05:55 AM - Re: Ethanol and Proseal (Tim Coldenhoff) 3. 06:25 AM - Re: Re: Flightline interior w/ alternative door seals (Lew Gallagher) 4. 08:46 AM - Re: fwf/engine hanging procedures (rvdave) 5. 08:55 AM - Re: Re: fwf/engine hanging procedures (DLM) 6. 08:55 AM - Re: Re: fwf/engine hanging procedures (DLM) 7. 08:56 AM - Re: Re: fwf/engine hanging procedures (Lew Gallagher) 8. 09:05 AM - Re: Re: fwf/engine hanging procedures (Bill Watson) 9. 09:16 AM - Re: Re: fwf/engine hanging procedures (Jim Combs) 10. 09:16 AM - Re: Re: Flightline interior w/ alternative door seals (Bob Leffler) 11. 09:36 AM - Re: Re: fwf/engine hanging procedures (Robin Marks) 12. 09:47 AM - Re: fwf/engine hanging procedures (rvdave) ________________________________ Message 1 _____________________________________ Time: 05:30:36 AM PST US From: davidsoutpost@comcast.net Subject: Re: RV10-List: Re: Flightline interior w/ alternative door seals I can not seem to be able to find the part number for the McMaster door seal being discussed right now. Does anyone have it handy or remember it? I will be starting my canopy in about a month and might as well go that route. Thanks! David Clifford RV-10 Builder 65% Done-95% To Go N849RV (reserved) ----- Original Message ----- From: "AirMike" Sent: Saturday, December 4, 2010 1:48:27 AM Subject: RV10-List: Re: Flightline interior w/ alternative door seals I tried a foam seal filling the gap and finally decided to go for the McM seal. It gives a nice finished edge and apparently is gaining popularity. The McM seal definitely takes some time to install - lots of dust and cutting, but in the end looks great. -------- See you OSH '11 Q/B - flying 1 yr+ Read this topic online here: http://forums.matronics.com/viewtopic.php?p=322236#322236 ________________________________ Message 2 _____________________________________ Time: 05:55:10 AM PST US From: Tim Coldenhoff Subject: Re: RV10-List: Ethanol and Proseal On 12/03/2010 07:49 AM, Jesse Saint wrote: > --> RV10-List message posted by: Jesse > Saint > > Does anybody know off the top of their head how Proseal handles > Ethanol? We are thinking about making some "wet wing" tanks for our > Maverick flying car (www.mavericklsa.com), but it needs to be able to > handle ethanol. Hello - I have been using MOGAS with ethanol in my RV9a since 2005 with no negative effects at all. In 2008 I pulled the tanks to safety wire the internal plumbing per Van's service bulletin. At that time, with three years of ethanol use, the tanks looked just as good on the inside as when I sealed them up the first time. The proseal was still just as firm. -- Tim Coldenhoff RV9a N194TC Egg 2.5L NA - Flying! http://www.deru.com/~rv9a ________________________________ Message 3 _____________________________________ Time: 06:25:35 AM PST US From: "Lew Gallagher" Subject: Re: RV10-List: Re: Flightline interior w/ alternative door seals Hey David, Here's what I think they use http://www.mcmaster.com/#edge-seals/=4175l2 part #1120A313 (look in right column). I'll try to attach Les's documentation that I saved -- excellent write up! Later, - Lew ----- Original Message ----- From: davidsoutpost@comcast.net To: rv10-list@matronics.com Sent: Saturday, December 04, 2010 8:25 AM Subject: Re: RV10-List: Re: Flightline interior w/ alternative door seals I can not seem to be able to find the part number for the McMaster door seal being discussed right now. Does anyone have it handy or remember it? I will be starting my canopy in about a month and might as well go that route. Thanks! David Clifford RV-10 Builder 65% Done-95% To Go N849RV (reserved) ________________________________ Message 4 _____________________________________ Time: 08:46:57 AM PST US Subject: RV10-List: Re: fwf/engine hanging procedures From: "rvdave" I've been going over the fwf list that Bob L. had in the archives, it showed 3 black cables, 2 for heat, what is the other one for? 3.00 CT A-740 BLACK PUSH PULL CABLE BLACK -------- Dave Ford RV6 flying RV10 building Cadillac, MI Read this topic online here: http://forums.matronics.com/viewtopic.php?p=322263#322263 ________________________________ Message 5 _____________________________________ Time: 08:55:03 AM PST US From: "DLM" Subject: Re: RV10-List: Re: fwf/engine hanging procedures alt air door for air box ----- Original Message ----- From: "rvdave" Sent: Saturday, December 04, 2010 9:44 AM Subject: RV10-List: Re: fwf/engine hanging procedures > > I've been going over the fwf list that Bob L. had in the archives, it > showed 3 black cables, 2 for heat, what is the other one for? > > 3.00 CT A-740 BLACK PUSH PULL CABLE BLACK > > -------- > Dave Ford > RV6 flying > RV10 building > Cadillac, MI > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=322263#322263 > > > ________________________________ Message 6 _____________________________________ Time: 08:55:36 AM PST US From: "DLM" Subject: Re: RV10-List: Re: fwf/engine hanging procedures If you are installing a parking brake you will need to buy an extra. ----- Original Message ----- From: "rvdave" Sent: Saturday, December 04, 2010 9:44 AM Subject: RV10-List: Re: fwf/engine hanging procedures > > I've been going over the fwf list that Bob L. had in the archives, it > showed 3 black cables, 2 for heat, what is the other one for? > > 3.00 CT A-740 BLACK PUSH PULL CABLE BLACK > > -------- > Dave Ford > RV6 flying > RV10 building > Cadillac, MI > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=322263#322263 > > > ________________________________ Message 7 _____________________________________ Time: 08:56:22 AM PST US From: "Lew Gallagher" Subject: Re: RV10-List: Re: fwf/engine hanging procedures Hey Dave, We used that one for the bypass door on the air filter. Later, - Lew ----- Original Message ----- From: "rvdave" Sent: Saturday, December 04, 2010 11:44 AM Subject: RV10-List: Re: fwf/engine hanging procedures > > I've been going over the fwf list that Bob L. had in the archives, it > showed 3 black cables, 2 for heat, what is the other one for? > > 3.00 CT A-740 BLACK PUSH PULL CABLE BLACK > > -------- > Dave Ford ________________________________ Message 8 _____________________________________ Time: 09:05:49 AM PST US From: Bill Watson Subject: Re: RV10-List: Re: fwf/engine hanging procedures Alternate air flap for air intake assembly? Bill On 12/4/2010 11:44 AM, rvdave wrote: > --> RV10-List message posted by: "rvdave" > > I've been going over the fwf list that Bob L. had in the archives, it showed 3 black cables, 2 for heat, what is the other one for? > > 3.00 CT A-740 BLACK PUSH PULL CABLE BLACK > > -------- > Dave Ford > RV6 flying > RV10 building > Cadillac, MI > > ________________________________ Message 9 _____________________________________ Time: 09:16:04 AM PST US Subject: Re: RV10-List: Re: fwf/engine hanging procedures From: Jim Combs alternate air On Sat, Dec 4, 2010 at 11:44 AM, rvdave wrote: > > I've been going over the fwf list that Bob L. had in the archives, it > showed 3 black cables, 2 for heat, what is the other one for? > > 3.00 CT A-740 BLACK PUSH PULL CABLE BLACK > > -------- > Dave Ford > RV6 flying > RV10 building > Cadillac, MI > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=322263#322263 > > ________________________________ Message 10 ____________________________________ Time: 09:16:41 AM PST US From: "Bob Leffler" Subject: RE: RV10-List: Re: Flightline interior w/ alternative door seals This is a great doc, with one exception. If you notice the photo of the cross section of the door seal, you will see a barb on the same side as the seal. It needs to be on the other side (interior of the door). It should be #2, not #3. There is enough fit issues without adding more mass between the cabin cover frame and the door. Myself and several others have used 1120A411, Edge-Grip Rubber Seal Bulb Opposite Grabber, 1/4" Edge, 3/8" Bulb Width. The difference is that it has a =C2=BC=9D edge, as oppose to 3/8=9D. We added a few ply of fiberglass to the back side of the cabin cover frame to ensure a tight fit for the =C2=BC=9D seal. This also has the benefit off adding more mass to the cabin cover to offset some of the structure that was removed in the rain gutter. Probably no right way to do it. Just the method that you think works best for you. bob From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Lew Gallagher Sent: Saturday, December 04, 2010 9:17 AM Subject: Re: RV10-List: Re: Flightline interior w/ alternative door seals Hey David, Here's what I think they use http://www.mcmaster.com/#edge-seals/=4175l2 part #1120A313 (look in right column). I'll try to attach Les's documentation that I saved -- excellent write up! Later, - Lew ----- Original Message ----- From: davidsoutpost@comcast.net Sent: Saturday, December 04, 2010 8:25 AM Subject: Re: RV10-List: Re: Flightline interior w/ alternative door seals I can not seem to be able to find the part number for the McMaster door seal being discussed right now. Does anyone have it handy or remember it? I will be starting my canopy in about a month and might as well go that route. Thanks! David Clifford RV-10 Builder 65% Done-95% To Go N849RV (reserved) ________________________________ Message 11 ____________________________________ Time: 09:36:41 AM PST US From: Robin Marks Subject: RE: RV10-List: Re: fwf/engine hanging procedures If you have an Airflow Performance Throttle body (FM200 / FM300) you will also need one for the Purge valve. I chose Red for the heat and black for the Purge & Parking Brake. Robin *From:* owner-rv10-list-server@matronics.com [mailto: owner-rv10-list-server@matronics.com] *On Behalf Of *Jim Combs *Sent:* Saturday, December 04, 2010 9:13 AM *To:* rv10-list@matronics.com *Subject:* Re: RV10-List: Re: fwf/engine hanging procedures alternate air On Sat, Dec 4, 2010 at 11:44 AM, rvdave wrote: I've been going over the fwf list that Bob L. had in the archives, it showed 3 black cables, 2 for heat, what is the other one for? 3.00 CT A-740 BLACK PUSH PULL CABLE BLACK -------- Dave Ford RV6 flying RV10 building Cadillac, MI Read this topic online here: http://forums.matronics.com/viewtopic.php?p=322263#322263 ========== ="_blank">www.aeroelectric.com ooks.com" target="_blank">www.buildersbooks.com et="_blank">www.homebuilthelp.com ="_blank">http://www.matronics.com/contribution le, List Admin. ========== arget="_blank">http://www.matronics.com/Navigator?RV10-List ========== http://forums.matronics.com ========== * * * * ------------------------------ No virus found in this message. Checked by AVG - www.avg.com ________________________________ Message 12 ____________________________________ Time: 09:47:58 AM PST US Subject: RV10-List: Re: fwf/engine hanging procedures From: "rvdave" ok thanks, I assume FAB kit comes with alternate air hardware? -------- Dave Ford RV6 flying RV10 building Cadillac, MI Read this topic online here: http://forums.matronics.com/viewtopic.php?p=322277#322277 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.