---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Wed 12/08/10: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:02 AM - Re: Step (AirMike) 2. 06:43 AM - Re: Step (Andy Turner) 3. 07:05 AM - Re: Re: Step (Werner Schneider) 4. 02:47 PM - Re: FS: Trutrack Pitch and Roll Servos (Patrick Pulis) 5. 06:47 PM - Re: Step (AirMike) 6. 06:55 PM - Re: N4959S is finally painted (builder 40214) (AirMike) ________________________________ Message 1 _____________________________________ Time: 06:02:54 AM PST US Subject: RV10-List: Re: Step From: "AirMike" Attached is picture of the doubler plate for bolt access hole. the whole job took about 4 hrs in all. Remember that the side panel fits here so check and fit carefully. Note that the doubler is cut away. As I recall these are the same pieces as the pitot access plate on the wing. -------- See you OSH '11 Q/B - flying 1 yr+ Read this topic online here: http://forums.matronics.com/viewtopic.php?p=322658#322658 Attachments: http://forums.matronics.com//files/p1000863_197.jpg ________________________________ Message 2 _____________________________________ Time: 06:43:10 AM PST US Subject: RV10-List: Re: Step From: "Andy Turner" I installed my access covers last night, and they look just like the ones in the photos above. Only difference is that I put a bit of a joggle in the doubler where it runs under the rib, but perhaps that isn't necessary. -------- Andy Turner Read this topic online here: http://forums.matronics.com/viewtopic.php?p=322665#322665 ________________________________ Message 3 _____________________________________ Time: 07:05:47 AM PST US From: Werner Schneider Subject: Re: RV10-List: Re: Step From what is looks they are the stall warning access parts VA-195C/D see Section 19. Werner On 08.12.2010 14:59, AirMike wrote: > --> RV10-List message posted by: "AirMike" > > Attached is picture of the doubler plate for bolt access hole. the whole job took about 4 hrs in all. Remember that the side panel fits here so check and fit carefully. Note that the doubler is cut away. As I recall these are the same pieces as the pitot access plate on the wing. > > -------- > See you OSH '11 > Q/B - flying 1 yr+ > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=322658#322658 > > > Attachments: > > http://forums.matronics.com//files/p1000863_197.jpg > > ________________________________ Message 4 _____________________________________ Time: 02:47:32 PM PST US From: Patrick Pulis Subject: Re: RV10-List: FS: Trutrack Pitch and Roll Servos Jae, I'd be interested in the pitch servo if you are willing to split?=0A =0AKind regards=0A=0APatrick Pulis=0AAdelaide, South Australia=0ARV-10 4029 9=0A=0A=0A=0A=0A________________________________=0AFrom: jchang10 =0ATo: rv10-list@matronics.com=0ASent: Wed, 8 December, 2010 4:01:28 PM=0ASubject: RV10-List: FS: Trutrack Pitch and Roll Servos com>=0A=0ALink to post on VAF with photo.=0Ahttp://www.vansairforce.com/com munity/showthread.php?t=65281=0A=0AI have TruTrak servos for both roll an d pitch for sale, which were originally to =0Abe paired with the Digiflight IIVS head, eventually. Due to a change in plans, =0Athese servos are no lo nger needed. The servos were mounted in the -10 project, =0Abut they have n ot flown yet. The sale includes the original Trutrak box, foam =0Apackaging , color print install "instructions" (basically just color prints) and =0Am ounting hardware for the right wing and the pitch mount.=0A=0AI am asking $ 1,970 or OBO, which includes shipping. Trutrak list is $2,250.=0A=0AThanks for looking, and let me know if you have any questions. Thanks!=0AJae=0A#40 533=0A=0A=0A=0A=0ARead this topic online here:=0A=0Ahttp://forums.matronics ==============0A=0A=0A ________________________________ Message 5 _____________________________________ Time: 06:47:08 PM PST US Subject: RV10-List: Re: Step From: "AirMike" I think that you are correct and the plates are actually from the stall warn access plate not the pitot access plate -------- See you OSH '11 Q/B - flying 1 yr+ Read this topic online here: http://forums.matronics.com/viewtopic.php?p=322710#322710 ________________________________ Message 6 _____________________________________ Time: 06:55:19 PM PST US Subject: RV10-List: Re: N4959S is finally painted (builder 40214) From: "AirMike" When do I get my original design copyright royalty check ? Another great paint job from Kracon...... -------- See you OSH '11 Q/B - flying 1 yr+ Read this topic online here: http://forums.matronics.com/viewtopic.php?p=322712#322712 Attachments: http://forums.matronics.com//files/final_on_ramp_951.jpg ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.