Today's Message Index:
----------------------
1. 08:39 AM - Re: Door Pin - Bullets (AirMike)
2. 08:46 AM - Re: No longer a project (AirMike)
3. 09:08 AM - Re: Re: Door Pin - Bullets (Don McDonald)
4. 02:56 PM - Re: No longer a project (Tom Biggs)
5. 05:23 PM - Paint Shop (Vicki Jones)
6. 06:39 PM - Re: Paint Shop (Steve Koziol)
7. 06:53 PM - Re: Paint Shop (Steve Koziol)
8. 08:46 PM - Re: Paint Shop (John Gonzalez)
9. 11:54 PM - Re: Paint Shop (Sean Stephens)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Door Pin - Bullets |
It is a pretty simple add-on and provides a lot of security. I have been flying
for over as year with no noticeable wear or trouble. I consider these pins virtually
a mandatory option. I had to ream out one or two of my aluminum receivers
as the install angle is very critical and they were mounted very slightly
off dead center. The advantage is that they bring the door and door pins into
alignment and provide a super secure lock.
--------
See you OSH '11
Q/B - flying 1 yr+
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=330284#330284
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: No longer a project |
Well done. Hope to see the new beast - maybe OSH !
Be sure to post some pics here and on the Vans first flights sheets.
--------
See you OSH '11
Q/B - flying 1 yr+
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=330287#330287
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Door Pin - Bullets |
Mike, I couldn't have said it better myself.- Well over 200 hours, and th
ey =0Astill look band new.... Although I still ck each door on every single
flight, =0Aand will continue doing that forever, I have much more confiden
ce in these vs. =0Athe stk Van's install.- Also consider doing (at least)
this mandatory.=0ADon McDonald=0A=0A=0A=0A________________________________
=0AFrom: AirMike <Mikeabel@Pacbell.net>=0ATo: rv10-list@matronics.com=0ASen
t: Wed, February 9, 2011 10:36:13 AM=0ASubject: RV10-List: Re: Door Pin - B
t>=0A=0AIt is a pretty simple add-on and provides a lot of security. I have
been flying =0Afor over as year with no noticeable wear or trouble. I cons
ider these pins =0Avirtually a mandatory option. I had to ream out one or t
wo of my aluminum =0Areceivers as the install angle is very critical and th
ey were mounted very =0Aslightly off dead center. The advantage is that the
y bring the door and door =0Apins into alignment and provide a super secure
lock.=0A=0A--------=0ASee you OSH '11 =0AQ/B - flying 1 yr+=0A=0A=0A=0A=0A
Read this topic online here:=0A=0Ahttp://forums.matronics.com/viewtopic.php
=0A=0A=0A =0A______________________________________________________________
______________________=0ANever miss an email again!=0AYahoo! Toolbar alerts
features/mail/
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: No longer a project |
[Mr. Green] I am green with envy. Congo Rats
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=330341#330341
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
We were scheduled with a paint shop that finishes out the fiberglass and un
fortunately the shop has closed due to the owner passing away. Does anyone
know of any reputable paint shops that finish out the fiberglass as part o
f the paint job? We are in the southeast (TN) but would be willing to fly
the plane to another state for the right paint shop.
Thanks=2C
Vicki
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Hi Vicki, sorry to hear about the death of the paint shop owner.- I had m
y RV 9A painted a year ago at Lancaster Aero Refinishers at Smoketown Airpo
rt near Lancaster, PA- Lou owns the shop and Dave does the painting.- T
heir number is 717 394-5805.- The work is top notch and I did not do any
prep work on the fiberglass pieces prior to dropping off the plane.- A pi
cture is attached.-I was completely thrilled with the paint job.- It's
been about 1 year 1 month and the job-still looks great.-
-
Smoketown Airport is not around the corner, but the price, workmanship and
3 week turn around time all exceeded my expectations.
-
Best of Luck
-
Steve Koziol
267 614-8251
N424JK 117 Hours
--- On Wed, 2/9/11, Vicki Jones <vickiajones@hotmail.com> wrote:
From: Vicki Jones <vickiajones@hotmail.com>
Subject: RV10-List: Paint Shop
We were scheduled with a paint shop that finishes out the fiberglass and un
fortunately the shop has closed due to the owner passing away.- Does anyo
ne know of any reputable paint shops that finish out the fiberglass as part
of the paint job?- We are in the southeast (TN) but would be willing to
fly the plane to another state for the right paint shop.
-
Thanks,
Vicki
=0A=0A=0A =0A______________________________________________________________
______________________=0ANever miss an email again!=0AYahoo! Toolbar alerts
features/mail/
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Hi Vicki
-
Sorry to hear about the death of the paint shop owner.- I had my RV 9A pa
inted a year ago at Lancaster Aero Refinishers at Smoketown Airport near La
ncaster, PA- Lou owns the shop and Dave does the painting.- Their numbe
r is 717 394-5805.- The work is top notch and I did not do any prep work
on the fiberglass pieces prior to dropping off the plane.--I was comple
tely thrilled with the paint job.- It's been about 1 year 1 month and the
job-still looks great.-
-
Smoketown Airport is not around the corner, but the price, workmanship and
3 week turn around time all exceeded my expectations.
-
Best of Luck
-
Steve Koziol
267 614-8251
N424JK 117 Hours
--- On Wed, 2/9/11, Vicki Jones <vickiajones@hotmail.com> wrote:
From: Vicki Jones <vickiajones@hotmail.com>
Subject: Paint Shop
We were scheduled with a paint shop that finishes out the fiberglass and un
fortunately the shop has closed due to the owner passing away.- Does anyo
ne know of any reputable paint shops that finish out the fiberglass as part
of the paint job?- We are in the southeast (TN) but would be willing to
fly the plane to another state for the right paint shop.
-
Thanks,
Vicki
___________________________________________________________________________
_________
Never miss an email again!
Yahoo! Toolbar alertsfeatures/mail/
=0A=0A=0A
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Very nice paint scheme and color selection...swwwweeeeeetttttt!
From: biovail2001@yahoo.com
Subject: Re: RV10-List: Paint Shop
Hi Vicki=2C sorry to hear about the death of the paint shop owner. I had m
y RV 9A painted a year ago at Lancaster Aero Refinishers at Smoketown Airpo
rt near Lancaster=2C PA Lou owns the shop and Dave does the painting. The
ir number is 717 394-5805. The work is top notch and I did not do any prep
work on the fiberglass pieces prior to dropping off the plane. A picture
is attached. I was completely thrilled with the paint job. It's been about
1 year 1 month and the job still looks great.
Smoketown Airport is not around the corner=2C but the price=2C workmanship
and 3 week turn around time all exceeded my expectations.
Best of Luck
Steve Koziol
267 614-8251
N424JK 117 Hours
--- On Wed=2C 2/9/11=2C Vicki Jones <vickiajones@hotmail.com> wrote:
From: Vicki Jones <vickiajones@hotmail.com>
Subject: RV10-List: Paint Shop
We were scheduled with a paint shop that finishes out the fiberglass and un
fortunately the shop has closed due to the owner passing away. Does anyone
know of any reputable paint shops that finish out the fiberglass as part o
f the paint job? We are in the southeast (TN) but would be willing to fly
the plane to another state for the right paint shop.
Thanks=2C
Vicki
=nofollow target=_blank>http://www.matronics.com/Navigator?RV10-List
et=_blank>http://forums.matronics.com
llow target=_blank>http://www.matronics.com/contribution
Get more visitors on archmarketing.yahoo.com/arp/sponsoredsearch_v2.php?o
=US2140&cmp=Yahoo&ctv=Q107Tagline&s=Y&s2=EM&b=50">Yahoo! Search
Marketing.
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Loehle is in Wartrace, TN. Not sure how close they are to you, but I
know they do the finish work on the fiberglass.
http://www.loehle.com/
On 2/9/11 7:15 PM, Vicki Jones wrote:
> We were scheduled with a paint shop that finishes out the fiberglass
> and unfortunately the shop has closed due to the owner passing away.
> Does anyone know of any reputable paint shops that finish out the
> fiberglass as part of the paint job? We are in the southeast (TN) but
> would be willing to fly the plane to another state for the right paint
> shop.
>
> Thanks,
> Vicki
> *
>
>
> *
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|