Today's Message Index:
----------------------
1. 11:02 AM - Re: Exhaust Pipe Temps (Lew Gallagher)
2. 04:07 PM - Fw: q.com (Miller John)
3. 10:05 PM - Re: Aircraft Video (greghale)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Exhaust Pipe Temps |
Hey Don,
I never saw a reply on your question re exhaust pipe temp, so today I aimed an
infrared sensor at the exhaust pipes just as they clear the cowling. 250 F and
it's 65 outside. He had just landed and I took it as he stopped after taxi
with the engine still running. The numbers bounced around a bit (wind?) but 250
seemed about average.
I'm curious what you'll do with this number? If it's about protecting the fiberglass
from heat, I've thought of using the same type of heat shield that is on
motorcycle headers -- a strap clamp around the pipe that holds a metal shield
off with an air gap in between. But if the adhesive reflective tape works just
as well, that may do the trick.
Later, - Lew
--------
non-pilot
crazy about building
NOW OFICIALLY BUILDER #40549
Fly off completed !
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=331546#331546
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Matt, can you help Dave?
Begin forwarded message:
> From: "DLM" <dlm34077@q.com>
> Date: February 19, 2011 5:09:37 PM CST
> To: "Miller John" <GENGRUMPY@AOL.COM>
> Subject: Re: q.com
>
> convey to the matronics list, if possible, that q.com is a valid
domain. also that dlm34077@q.com is a valid FROM address as well as a
valid TO address. I still receive the list messages; I just can not
reply; I receive a message rejection from the list.
> ----- Original Message -----
> From: Miller John
> To: DLM
> Sent: Saturday, February 19, 2011 4:00 PM
> Subject: Re: q.com
>
> What do you need me to do??
>
> On Feb 19, 2011, at 4:33 PM, DLM wrote:
>
>> the list has implemented something that treats my dlm34077@q.com as
spam. the q.com domain is valid for Qwest DSL. Since I can not send to
them perhaps you could pass this message to a person there.
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Aircraft Video |
I mounted the POV 1.5 camera on my rv10's tail. The tail height aims the camera
over the top of the cabin. The prop strobe effect is at the bottom of the video
frame. The cord to the camera contains the video and power. The system
comes complete with a hand held DVR that has a screen on it so you can test or
aim it. The DVR has AA batteries that also supply power to the camera. The
video is recorded on a 4 or 8 GB SD card in the DVR. The camera also comes with
editing software. Amazon has a complete system at
http://www.amazon.com/VIO-POV-1-5-Video-System/dp/B001TALUFY
The camera installation shown on my web site is an older camera that did not work
very well. I adapted the camera installation to mount the smaller POV camera.
Greg...
--------
Greg Hale rv10 -- N210KH
www.nwacaptain.com
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=331593#331593
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|