---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Wed 02/23/11: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:44 AM - Re: Governor control cable bracket (gary) 2. 06:42 AM - Re: Arizona vacation (Don McDonald) 3. 08:47 AM - Re: Arizona vacation (DLM) 4. 03:12 PM - Re: Governor control cable bracket (Carl Froehlich) 5. 07:03 PM - Wheel bolt info (Miller John) 6. 07:25 PM - extra tanks (DLM) 7. 08:53 PM - Re: Wheel bolt info (Kelly McMullen) ________________________________ Message 1 _____________________________________ Time: 05:44:31 AM PST US From: "gary" Subject: RE: RV10-List: Governor control cable bracket >From your mouth to my ears!!! Gary Specketer _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Neal George Sent: Tuesday, February 22, 2011 9:56 PM Subject: RE: RV10-List: Governor control cable bracket My airplane has been out of the garage for nearly three years. I'm still hard-pressed to get a bicycle in far enough to air-up the tires. neal From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Robin Marks Sent: Tuesday, February 22, 2011 7:59 PM Subject: RE: RV10-List: Governor control cable bracket Ahhhh the good old days. Deems, do you miss having an airplane in the garage? To all those still building at home. One day you may be able to fit a car in your garage again. Robin Do Not Archive From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Deems Davis Sent: Tuesday, February 22, 2011 5:15 PM Subject: Re: RV10-List: Governor control cable bracket Here's a link to a set of pictures that should be self explanatory: http://deemsrv10.com/album/Sec%20FF2%20Baffling%20and%20Plenum/slides/DSC048 52.html Here's a link to some write ups that accompany the pics: http://deemsrv10.com/FF2logindex.html Deems On 2/22/2011 5:46 PM, Kelly McMullen wrote: I think that is the exact combination Deems has on his tricked out Ten. On Tue, Feb 22, 2011 at 5:10 PM, Carl Froehlich wrote: I'm trying to figure out what to do for a governor bracket. I'm using a PCU5000 governor and James plenum. I purchased the bracket from Van's but it is clocked wrong (ether pointed at the cylinder or pointed straight down). How did others do this? Carl -- Deems Davis ============= , ?RV10-List">http://www.matronics.com/Navigator?RV10-List - MATRONICS WEB FORUMS - = t; http://www.matronics.com/contribution ============= _____ No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1204 / http://www.matronic================ http://forums.matronics.com - List Contribution Web generous nbsp; --> http://www.matronics.com/c= ________________________________ Message 2 _____________________________________ Time: 06:42:19 AM PST US From: Don McDonald Subject: Re: RV10-List: Arizona vacation Hey dlm, are you in witness relocation program?- Never see a real name, j ust =0Adlm.=0A=0A=0A=0A=0A________________________________=0AFrom: DLM =0ATo: rv10-list@matronics.com=0ASent: Tue, February 22, 2011 9 :50:04 PM=0ASubject: Re: RV10-List: Arizona vacation=0A=0A=0AI am at FFZ; s end a phone number to dlm34077at q.com=0A----- Original Message ----- =0A>F rom: Rick Lark =0A>To: RV10-list =0A>Sent: Tuesday, February 22, 2011 6:31 PM=0A>Subject: RV10-List: Arizona vacation=0A>=0A>=0A>Hi all=0A>=0A>My wife and I are presently on vacation in Arizona, and will be in the Tucson =0A> area Friday Feb 25 - Monday Feb 28th, and then in the Scotsdale area from T ue =0A>Mar 1 - Thur Mar 3.=0A>=0A>If any RV10 builders have a couple of hou rs to show off their -10, please email =0A>me as I'd love to have a look an d-a talk.=0A>=0A>Regards,=0A>=0A>Rick=0A>#40956 - Wings in progress=0A>So uthampton, Ont=0A> =0A>=0A> =0A>href="http://www.matronics.com/Navigator ?RV10-List">http://www.matronics.com/Navigator?RV10-List=0A> href="http:/ /forums.matronics.com">http://forums.matronics.com =0A>href="http://www.m ======= =0A=0A=0A=0A ________________________________ Message 3 _____________________________________ Time: 08:47:18 AM PST US From: "DLM" Subject: Re: RV10-List: Arizona vacation I was put in the witness protection program for building too many aircraft. ----- Original Message ----- From: Don McDonald To: rv10-list@matronics.com Sent: Wednesday, February 23, 2011 7:39 AM Subject: Re: RV10-List: Arizona vacation Hey dlm, are you in witness relocation program? Never see a real name, just dlm. ------------------------------------------------------------------------- ----- From: DLM To: rv10-list@matronics.com Sent: Tue, February 22, 2011 9:50:04 PM Subject: Re: RV10-List: Arizona vacation I am at FFZ; send a phone number to dlm34077at q.com ----- Original Message ----- From: Rick Lark To: RV10-list Sent: Tuesday, February 22, 2011 6:31 PM Subject: RV10-List: Arizona vacation Hi all My wife and I are presently on vacation in Arizona, and will be in the Tucson area Friday Feb 25 - Monday Feb 28th, and then in the Scotsdale area from Tue Mar 1 - Thur Mar 3. If any RV10 builders have a couple of hours to show off their -10, please email me as I'd love to have a look and a talk. Regards, Rick #40956 - Wings in progress Southampton, Ont href="http://www.matronics.com/Navigator?RV10-List">http://www.matronic s.com/Navigator?RV10-List href="http://forums.matronics.com">http://forums.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/c or?RV10-List" rel=nofollow target=_blank>http://www.matronics.com/Navigtronics.com/" rel=nofollow target=_blank>http://forums.matronics.com ________________________________ Message 4 _____________________________________ Time: 03:12:42 PM PST US From: "Carl Froehlich" Subject: RE: RV10-List: Governor control cable bracket Thanks Deems - perfect. Carl From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Deems Davis Sent: Tuesday, February 22, 2011 8:15 PM Subject: Re: RV10-List: Governor control cable bracket Here's a link to a set of pictures that should be self explanatory: http://deemsrv10.com/album/Sec%20FF2%20Baffling%20and%20Plenum/slides/DSC048 52.html Here's a link to some write ups that accompany the pics: http://deemsrv10.com/FF2logindex.html Deems On 2/22/2011 5:46 PM, Kelly McMullen wrote: I think that is the exact combination Deems has on his tricked out Ten. On Tue, Feb 22, 2011 at 5:10 PM, Carl Froehlich wrote: I'm trying to figure out what to do for a governor bracket. I'm using a PCU5000 governor and James plenum. I purchased the bracket from Van's but it is clocked wrong (ether pointed at the cylinder or pointed straight down). How did others do this? Carl -- Deems Davis ________________________________ Message 5 _____________________________________ Time: 07:03:48 PM PST US From: Miller John Subject: RV10-List: Wheel bolt info I'd appreciate it if one of the builders who has not yet put their wheels together would give me the AN bolt numbers off both main and nose wheels. Van's doesn't have it, nor does Cleveland have it in any of their manuals and won't answer the request. I need to stock some extras. Thanks - grumpy ________________________________ Message 6 _____________________________________ Time: 07:25:10 PM PST US From: "DLM" Subject: RV10-List: extra tanks For anyone who has added two additional tanks to the RV10 wings, please advise the approximate time/cost to do so. I am already aware of the engineering issues. thanks. I am considering buying tank parts from Van's and installing additional tanks outboard and interconnected with the existing tank system. ________________________________ Message 7 _____________________________________ Time: 08:53:43 PM PST US From: Kelly McMullen Subject: Re: RV10-List: Wheel bolt info Well, the best I can give you is parts breakout in the Spruce catalog, pg 232, 5:00X5 Cleveland has either AN4-31A for most, or AN4-22A for the rest. For 6:00X6 it is most likely AN5-35A On 2/23/2011 8:00 PM, Miller John wrote: > --> RV10-List message posted by: Miller John > > I'd appreciate it if one of the builders who has not yet put their wheels together would give me the AN bolt numbers off both main and nose wheels. > > Van's doesn't have it, nor does Cleveland have it in any of their manuals and won't answer the request. > > I need to stock some extras. > > Thanks - grumpy > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.